• 폴리머
• /
• 제34권3호
• /
• pp.198-201
• /
• 2010

탄소나노튜브의 응집력을 완화하기 위한 표면 개질과 고분자 소재와의 상용성을 유도하기 위하여, 친수성 고분자를 도입하는 연구를 진행하였다. 산처리를 통한 표면 기능화를 시행하였으며, 카복실기 도입 탄소나노튜브를 thionyl chloride을 사용하여 acyl chloride로 치환한 후 저분자량의 아민 말단 poly(ethylene oxide)를 공유결합으로 도입하였다. TGA를 통하여 탄소나노튜브 표면에 도입된 고분자의 함량을 계산하였으며, 탄소나노튜브 표면에 도입된 고분자의 표면 형상을 SEM과 TEM을 통하여 직경이 증가하는 것을 확인할 수 있었다.

• Preventive Nutrition and Food Science
• /
• 제15권1호
• /
• pp.36-43
• /
• 2010

The purpose of this study was to investigate the phenolic acid, proanthocyanidin (PAs), and flavonol glycoside contents, as well as the antioxidant activities of pine needle extracts from six species of young pine trees. The extracts were prepared from Section Pinus (Diploxylon): P. densiflora, P. sylvestris, P. pinaster and P. pinea, and Section Strobus (Haploxylon): P. koraiensis and P. strobus. Phenolics were extracted from pine needles with 80% acetone to obtain the soluble free fraction, and insoluble residues were digested with 4 M NaOH to obtain bound ethyl acetate and bound water fractions. Phenolics were analyzed by HPLC, and the hydrophilic antioxidant activity was measured using oxygen radical absorbance capacity (ORAC). Total phenolic and flavonoid contents of the soluble free fraction were higher than those of the bound ethyl acetate and bound water fractions. The main phenolics were monomers and polymers of PAs in the soluble free fraction, and phenolic acids and flavonol glycosides in bound ethyl acetate fraction. Flavonol glycosides found in different species of pine needles were qualitatively similar within fractions, but composition varied among Pinus sections. High levels of kaempferol arabinoside and an unknown compound were present in all Strobus species. The soluble free fraction had the highest antioxidant activity, followed by bound ethyl acetate and bound water fractions.

• Journal of Pharmaceutical Investigation
• /
• 제41권6호
• /
• pp.323-329
• /
• 2011

In order to develop new protein carrier replacing poly(DL-lactic acid-co-glycolic acid) (PLGA) microspheres, succinylated pullulan acetate (SPA) was investigated to fabricate a long term protein delivery carrier. SPA microspheres loaded with lysozyme (Lys) as a model protein drug were prepared by a water/oil/water (W/O/W) double emulsion method. An acidity test of SPA copolymers after hydrolysis was performed to estimate the change of protein stability during releasing proteins from the microspheres. There was no pH change of SPA copolymers, but pH of PLGA polymers after hydrolysis was significantly decreased to around pH 2, indicating that the long-term stability of proteins released from SPA microspheres can be guaranteed. Loading efficiency of proteins into SPA microspheres was three times higher than those into conventional PLGA microspheres, indication of inducing stronger charge interaction between proteins and succinyl groups in SPA microspheres. Although initial burst behaviors were monitored in Lys-loaded SPA microspheres due to relatively strong hydrophilic succinyl segments in SPA microspheres, initial burst issues would be circumvented if the ratio of charge density of succinyl moieties and hydrophobic acetate groups is harmonically controlled. Therefore, in this study, a new attempt of protein delivery system was made and functional SPA was successfully confirmed as a new protein carrier.

• Journal of Pharmaceutical Investigation
• /
• 제32권4호
• /
• pp.299-303
• /
• 2002

The oral bioavailability of itraconazole is variable and low in fasting state. This is mainly due to the low solubility of this drug. Bioavailability can be improved by changing the formulation and it is general that the liquid preparations show greater bioavailability than the solid dosage forms such as tablets and capsules do. Benzyl alcohol-water binary mixture showed the excellent solubilizing capacity for itraconazole but the release of the drug from the preparation needs to be enhanced. In this study, various nonionic surfactants and hydrophilic polymers, poloxamers, were screened to investigate their effects on the releasε of itraconazole from the liquid preparations. Poloxamer 407 showed the most enhancing effect on the drug release and the release rate was proportional to thε amount of poloxamer 407 added. A liquid preparation of itraconazole, consisting of benzyl alcohol/water/poloxamer 407 ternary solvent system, releasεd more than 80% of the total drug amount at 5 min and showεd the possibility of a new formulation development.

• 약학회지
• /
• 제40권4호
• /
• pp.411-417
• /
• 1996

Epidermal growth factor(EGF), a potential healing agent for wounds and burns, has been formulated to topical gels with the hydrophilic polymers, Carbopol 934P. Physicochemical c haracteristics of the aqueous gels were evaluated by rheological properties and pH changes on storage. The gels were relatively stable at $4^{\circ}C$ and room temperature showing no changes in pH for two weeks, and revealed the rheogram of shear thinning plastic flow with the yield values in the range of 40 to 70dyne/$cm^2$. In vivo healing effects of different gel formulations have been compared with water-soluble and oleaginous ointments in full-thickness wound mouse model. The gel systems resulted in better wound healing effects than the other ointments. Furthermore, liposomal Carbopol gel has been developed by the addition of EGF-containing liposomal suspension into the Carbopol gel. The enhanced wound healing effects have been observed in the liposomal gel system, compared to the other gels and conventional ointments.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.262-262
• /
• 2006

Biodegradable and amphiphilic di-block and tri-block copolymers, prepared with monomethoxy poly ethylene glycol (MPEG) and ${\varepsilon}-caprolactone\;({\varepsilon}-CL)$, were used for the application of W1/O/W2 multi- emulsion capsules. The effects of topology and the ratio of hydrophilic moiety of PCL-based polymers on the encapsulation efficiency of the $W_{1}/O/W_{2}$ multi-emulsion capsules containing Ascorbic Acid-2-Glucoside (AA-2-G) were investigated. The ratio of PEG and PCL was 1:0.5, 1:0.75, 1:1, and 1:1.25. PEG-PCL block copolymers were added to the first step of the preparation of $W_{1}/O$ emulsions. The dispersion stability, the particle size, the morphology of the $W_{1}/O/W_{2}$ multi-emulsion capsules were observed using an on-line turbidity meter, dynamic light scattering (DLS), a confocal microscopy (with FITC) and an optical microscopy. Biodegradable behavior of the PEG-PCL block copolymers and release behavior of AA-2-G were also observed by Gel Permeation Chromatography (GPC) and High Performance Liquid Chromatography (HPLC).

• Macromolecular Research
• /
• 제10권2호
• /
• pp.115-121
• /
• 2002

Synthesis of polymers with controlled thermosensitive properties was carried out by conventional radical copolymerization of N-isopropylacrylamide (NIPAAm) with N-vinylpyrrolidone (NVP) taken as a hydrophilic comonomer. Lower activity of NVP rather than NIPAAm was revealed by gravimetric and $^1$H NMR analysis. Thermosensitive properties of the copolymers were investigated. It was found that aqueous solutions of the copolymers undergo thermo-induced phase transition and become opaque, precipitate or gel with heating. After formation of the gels their significant contraction was observed at storage. Swelling degree and amount of expelled water were measured in dependence on the copolymer composition, temperature and ionic strength of environment medium and concentration of the solution. It was determined that in collapsed state gels exhibit quite high water content. According to physico-chemical properties of the copolymers observed they could be suitable for biomedical application as an injectable implant material.

• Macromolecular Research
• /
• 제15권4호
• /
• pp.385-391
• /
• 2007

Block copolymer micelles are generally formed via the self-assembly of amphiphilic block copolymers in an aqueous medium. The hydrophilic and hydrophobic blocks form shell and core micelles, respectively. The block copolymers of methoxy poly(ethylene glycol) (MPEG)-b-poly(2-diisopropylamino)ethyl methacrylate (PDPA) were synthesized via atom transfer radical polymerization, with the macro initiator synthesized by the coupling of 2-bromoisobutyryl bromide with MPEG in the presence of a triethyl amine base catalyst. The atom transfer radical polymerization of 2-diisopropylamino)ethyl methacrylate was performed in conjunction with an N,N,N',N",N"-pentamethyl-diethylenetriamine/copper bromide catalyst system, in DMF, at $70^{\circ}C$. The pH induced micellization/demicellization was studied using fluorescence, with a pyrene probe. Furthermore, the pH dependent micellization was confirmed using the microviscosity method, with a dipyme fluorescence probe. The pH dependant micelle size distribution was studied using dynamic light scattering. The characterization of the synthesized polymers was established using gel permeation chromatography and from the $^1H-nuclear$ magnetic resonance spectroscopy.

• 통합자연과학논문집
• /
• 제9권4호
• /
• pp.249-254
• /
• 2016

This study evaluated the physical and optical characteristics of hydrophilic ophthalmic polymer with addition of 2-methacryloyloxyethyl phosphorylcholine in the basic hydrogel ophthalmic lens material, and in particular, the utility of 2-methacryloyloxyethyl phosphorylcholine as an ophthalmic contact lens material for ophthalmologic devices was investigated. In this study 2-methacryloyloxyethyl phosphorylcholine were used as additives. For the preparation of hydrogel lens 2-hydroxyethyl methacrylate, methyl methacrylate, acrylic acid and a cross-linker EGDMA were copolymerized in the presence of AIBN as an initiator. The physical properties of the produced polymers were measured as followings. The refractive index of 1.433~1.393, water content of 35.95~53.16%, contact angle of $70.6{\sim}51.24^{\circ}$, UVB transmittance of 81.2~82.4%, UV-B transmittance of 81.2~82.4% and visible transmittance of 91.4~92.2% were obtained. Also, in case of protein absorption, the measurement showed that absorbance of Reference and MPC-10 sample was 0.2598 and 0.2250 respectively. Based on the results of this study, ophthalmic lens material containing 2-methacryloyloxyethyl phosphorylcholine is expected to be used usefully as a material for high wettability and inhibitor of protein adsorption for ophthalmic hydrogel lens.

• 한국기계가공학회지
• /
• 제2권4호
• /
• pp.17-24
• /
• 2003

Chemical mechanical polishing(CMP) has been applied for planarization of topography after patterning process in semiconductor fabrication process. Tungsten CMP is necessary to build up interconnects of semiconductor device. But the tungsten dishing and the oxide erosion defects appear at end-point during tungsten CMP. It has been known that the generation of dishing and erosion is based on the over-polishing time, which is determined by pattern selectivity. Fixed abrasive pad takes advantage of decreasing the defects resulting flam reducing pattern selectivity because of the lower abrasive concentration. The manufacturing technique of fixed abrasive pad using hydrophilic polymers is introduced in this paper. For application to tungsten CMP, chemicals composed of oxidizer, catalyst, and acid were developed. In comparison of the general pad and slurry for tungsten CMP, the fixed abrasive pad and the chemicals resulted in appropriate performance in point of removal rate, uniformity, material selectivity and roughness.