• 한국환경과학회지
• /
• 제3권1호
• /
• pp.57-64
• /
• 1994

On the basis of the principle of Bratch's electronegativity equalization, we calculated group partial charges and group electronegativities for nonionic surfactants with Pauling's elecoonegativity parameters by using numerical calculation method. From calculated outputs we have investigated structural stability of micelle, characteristics of hydrophilic and hydrophobic groups, and relation between CMC(Critical Micelle Concentraion) and group partial charge and group electronegativity of hydrophilic and hydrophobic groups for nonionic surfactants. We have known that CMC by micelle formation depends upon group partial charge and group electronegativity of hydrophilic and hydrophobic groups for surfactants. Also, the structural stability of micelle in H2O solution is related to the electric double layer by the hydrophilic group of nonionic surfactants with H atoms in water CMC is diminished by the decrease of repeating units in hydrophilic group at constant hydrophobic group and is diminished by the increments of alkyl chains in hydrophobic group at constant hydrophilic group for nonionic surfactants. In conclusion, CMC is diminished because there is no electrostatic repulsion and is diminished of Debye length by the increments of partial charge of hydrophobic group.

• 공업화학
• /
• 제8권6호
• /
• pp.914-919
• /
• 1997

본 연구에서는 Bratsch의 전기음성도 동등화 원리를 바탕으로 Pauling의 전기음성도 파라미터를 이용하여 음이온과 비이온 계면활성제의 전기음성도 동등화 및 그룹 전기음성도와 그룹 부분전하를 계산하여 계면활성제의 친수성기와 소수성기의 그룹 부분전하, 전기음성도와 CMC에 대한 특성을 조사하였다. 그 결과 계면활성제의 CMC는 친수성기와 소수성기의 그룹 부분전하와 그룹 전기음성도에 의존한다는 것을 알 수 있었다. 음이온 계면활성제인 경우 소수성기의 탄소수가 증가함에 따라 소수성기에도 음의 부분전하가 비편재화되어 전기음성도가 매우 큰 친수성 그룹의 음의 부분전하가 감소하여 친수성기간의 반발력이 상대적으로 줄어들기 때문에 CMC가 낮아짐을 알수 있다. 비이온 계면활성제의 경우에 소수성기의 탄소수가 증가하면 소수성기에서의 부분전하가 증가하게되며, 전기음성도의 증가가 친수성기의 전기음성도를 감소시켜 CMC가 낮아짐을 알수 있다. 그러나 친수성기의 반복단위가 증가하면 친수성기의 음의 부분전하가 증가하게 되고 따라서 수화능이 증가하기 때문에 계면활성제는 미셀로 존재하기 보다는 물속에 수화되기 때문에 CMC는 증가하게 된다.

• 한국환경과학회지
• /
• 제9권5호
• /
• pp.403-408
• /
• 2000

On the basis of theory of Bratsch's electronegativity equalization the electronegativity equalization the group electronegativities and the group partial charges for cationic and amphoteric surface and amphoteric surfactants could be calculated using Pauling's electronegativity parameters. From calculated output we have investigated relationships between CMC(critical micelle concentration) and partial charge and group electronegativity of hydrophilic and hydrophobic groups structural stability of micelle for cationic and amphoteric surfactants. As a result CMC depends upon partial charge and electronegativity of hydrophilic group is decreased. With increasing the carbon number of hydrophilic group for cationic surfactant its partial charge is increased but CMC and its electronegativity are decreased. With increasing the carbon number of hydrophobic group for cationic and amphoteric surfactant its partial charge is increased but CMC andits electronegativity are decreased.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2256-2268
• /
• 2018

Hydrophilic and hydrophobic polyethersulfone (PES)-zinc oxide (ZnO) sublayers were prepared by loading of ZnO nanoparticles into PES matrix. Both porosity and hydrophilicity of the hydrophilic sublayer were increased upon addition of hydrophilic ZnO, while these were decreased for the hydrophobic sublayer. In addition, the results demonstrated that the hydrophilic membrane exhibited smaller structural parameter (S value or S parameter or S), which is beneficial for improving pure water permeability and decreasing mass transfer resistance. In contrast, a higher S parameter was obtained for the hydrophobic membrane. With a 2 M NaCl as DS and DI water as FS, the pure water flux of hydrophilic TFN0.5 membrane was increased from $21.02L/m^2h$ to $30.06L/m^2h$ and decreased for hydrophobic TFN0.5 membrane to $14.98L/m^2h$, while the salt flux of hydrophilic membrane increased from $10.12g/m^2h$ to $17.31g/m^2h$ and decreased for hydrophobic TFN0.5 membrane to $3.12g/m^2h$. The increment in pure water permeability can be ascribed to reduction in S parameter, which resulted in reduced internal concentration polarization (ICP). The current study provides a feasible and low cost procedure to decrease the ICP in FO processes.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.229-229
• /
• 2007

In this study, HEMA-based hydrophilic copolymers were synthesized and dielectric constant (K) of the polymer thin films were investigated by change hydroxyl group (-OH) ratio in the polymer chain. The different hydroxyl group ratios were characterized by FT-IR and its thin films were obtained by spin coating. As a result, due to the moisture absorption of the hydrophilic thin film, the dielectric constant has been increased as was expected. The highest dielectric constant (K=4.19, @1MHz) was observed at 40% hydroxyl group ratio among the several polymers.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.664-672
• /
• 2011

A series of hydrophilic chromophores was synthesized through introduction of dendritic sulfonate anions using click chemistry. A dendron structure bearing several sulfonate groups enhances hydrophilicity of attached chromophores. A click triazole formation connects chromophores with hydrophilic groups. A neutral trichloroethyl sulfonate has versatile features such as easy introduction, chemical endurance for isolation or storage, and convenient transformation to a hydrophilic anion. Zinc and OH mediated cleavage of trichloroethyl group from the neutral sulfonate undergoes to generate a water-soluble sulfonate anion. The solubility was examined with different counter cations and in different pH media and thus increased with the number of attached sulfonate ion. Two hydrophilic chromophores of stilbene-derived and azobenzene-derived dipolar structures exhibit clear negative and positive solvatochromism in protic solvents, respectively.

• 생태와환경
• /
• 제44권4호
• /
• pp.358-363
• /
• 2011

본 연구는 영산강수계 광주지역에 대하여 XAD와 FTIR를 이용하여 자연유기물질에 대한 분포특성을 연구하였다. XAD 8/4 resin을 이용한 NOM fractionation 분석은 친수성 및 소수성을 변별하는데 사용되어졌다. FT-IR은 자연유기물의 구조에서 기능족을 분석하는데 사용되어졌다. XAD 조사에서 영산강본류의 광주상류지점(GJ-1), 광주하류지점(GJ-2), 광주천(GJC), 광주하수처리장(GJS) 등 4개 지점에서 대부분 친수성으로 조사되었다. 다만, 3월에 GJ-1 지점에서는 소수성이 주를 이루었다. 5월에는 수온의 상승과 함께 미생물의 활성의 증가로 4개 지점 공통적으로 친수성으로 조사되었고, 10월에는 3월과 매우 유사한 결과가 되었다. FT-IR 조사에서는 넓거나 높아 뚜렷한 피크들이 주로 지방족 화합물, 특히 OH 그룹, CH, $C-H_2$, $C-H_3$ 및 C-O 알코올 그룹들로 나타났고, 이들은 친수성 물질들이다. FT-IR 조사에서 그 외의 피크들은 약간의 방향족 화합물, 특히 C=O (Ketone) 그룹이 나타났다. 결과적으로 본 연구에서 영산강수계 광주지역은 주로 친수성 물질들이며, 지방족 화합물(OH, C-H etc.)인 것으로 조사되었다.

• The Journal of Advanced Prosthodontics
• /
• 제8권5호
• /
• pp.396-403
• /
• 2016

PURPOSE. Early loading of implant can be determined by excellent primary stability and characteristic of implant surface. The implant system with recently improved surface can have load application 4-6 weeks after installing in maxilla and mandible. This study evaluated the effect of healing period to the stability of hydrophilic tapered-type implant at maxillary posterior area. MATERIALS AND METHODS. This study included 30 patients treated by hydrophilic tapered-type implants (total 41 implants at maxilla) and classified by two groups depending on healing period. Group 1 (11 patients, 15 implants) was a control group and the healing period was 12 weeks, and Group 2 (19 patients, 26 implants) was test group and the healing period was 6 weeks. Immediately after implant placement, at the first impression taking, implant stability was measured using Osstell Mentor. The patients also took periapical radiographs after restoration delivery, 12 months after restoration and final followup period. The marginal bone loss around the implants was measured using the periapical radiographs. RESULTS. All implants were survived and success rate was 97.56%. The marginal bone loss was less than 1mm after 1 year postoperatively except the one implant. The stabilities of the implants were not correlated with age, healing period until loading, insertion torque (IT), the diameter of fixture and the location of implant. Only the quality of bone in group 2 (6 week) was correlated with the stability of implant. CONCLUSION. Healing period of 6 weeks can make the similar clinical prognosis of implants to that of healing period of 12 weeks if bone quality is carefully considered in case of early loading.

• 한국진공학회지
• /
• 제8권3B호
• /
• pp.262-268
• /
• 1999

Polycarbonate (PC) and Polymethylmethacrylate (PMMA) surface was modified by ion assisted reaction (IAR) technique to obtain the hydrophilic functional groups and improve the wettability. In conditions of ion assisted reaction, ion beam energy was changed from 500 to 1500eV, and ion dose and oxygen gas blown rate were fixed $1\times10^{16}$ ions/$\textrm{cm}^2$ and 4ml/min, respectively. Wetting angle of water on PC and PMMA surface modified by $Ar^+$ ion without blowing oxygen at 4ml/mon showed $5^{\circ}$ and $10^{\circ}$. Changes of wetting angle with oxygen gas and $Ar^+$ ion irradiation were explained by considering formation of hydrophilic group due to a reaction between irradiated polymer chain by energetic ion irradiation and blown oxygen gas. X-ray photoelectron spectroscopy analysis shows that hydrophilic groups such as -C-O, -(C=O)- and -(C=O)-O- are formed on the surface of polymer by chemical interaction. The polymer surface modification using ion assisted reaction only changed the surface physical properties and sept the bulk properties. In comparison with other modification methods, the surface modification by IAR treatment was chemically stable and enhanced the adhesion between metal and polymer surface. The applications of various kinds of polymer surface modification methods, metal and polymer surface. The applications of various kinds of polymer surface modification could be appled to the new materials about hydrophilic surface properties by IAR treatment. The adhesion between metal film and polymer measured by Scotch tape test whether the hydrophilic surfaces could improve the adhesion strength or not.

• 전기화학회지
• /
• 제15권4호
• /
• pp.236-241
• /
• 2012

일반적으로 그라파이트는 높은 결정성으로 인해 나노입자상으로 제조하기 어려우며 특히 표면에 친수성을 부여하기가 쉽지 않은 재료로 알려져 왔다. 본 연구에서는 박막 증착에 널리 활용되어 오던 펄스 레이저 어블레이션 기법을 액상에 적용하여 친수성이 부여된 그라파이트 나노입자를 합성하였다. 타겟으로는 그라파이트 로드를 사용하였으며 레이저 출력을 조절하며 액상에서 어블레이션을 실시한 결과 매우 높은 분산 안정성을 갖는 친수성 그라파이트 나노입자를 합성할 수 있었다. FT-IR 분석결과 합성된 친수성 그라파이트 나노입자는 카르복시기 및 카르보닐기 등이 나노입자의 형성과 동시에 표면에 도입된 것이 밝혀졌으며 이는 제타 포텐셜로도 확인할 수 있었다. 최종적으로 Polyethyleneglycol(PEG)과 컴포지트하여 아세톤 센서에 적용한 결과 기존의 카본 블랙 대비 우수한 감도를 나타내었다.