• KIEAE Journal
• /
• v.11 no.6
• /
• pp.133-138
• /
• 2011

This paper presents energy self-sufficiency simulated in municipal wastewater treatment plants (WWTPs) by adopting solar energy production systems that were simulated by varying azimuth and super-hydrophilic coating on the surface of photovoltaic (PV). Relative to the national average energy consumption in WWTPs, the employment of 100 kW PV system was simulated to achieve 2.75% of energy self-sufficiency. The simulated results suggested that the installation of PVs toward South or Southwest would produce the highest energy self-sufficiency in WWTPs. When super-hydrophilic coating was employed in the conventional PV, 5% of additional solar energy production was achievable as compared to uncoated conventional PV. When 100 kW of PV system was installed in a future test-bed site, Kihyeung Respia WWTP located in Yongin, South Korea, the energy self-sufficiency by solar power was simulated to be 1.77%. The simulated solar power production by azimuth and super-hydrophilic coating will be useful reference for practitioners in designing the solar PV systems in the WWTPs.

• Journal of Korean Society on Water Environment
• /
• v.22 no.4
• /
• pp.678-686
• /
• 2006

The feasibility of the high-hydrophilic biofilter was examined for application in rural wastewater treatment in Korea. The intermittent trickling biofiter was developed for wastewater treatment of media and examined instantaneous wetting water and immersional wetting water. Melamin foam absorbed 120 times it's weight in water and maintained wetting status than other materials. These characteristics are improvement for application in rural areas showing large variance of amount of influent. The biofilter process was effective in treating organic pollutants; mean removal efficiencies of $BOD_5$ and TSS were above 80%. The average SS concentrations of effluent was showed below $10mg/L^{-1}$ and meet guidelines in special regions, however, the average concentration of $BOD_5$ was about $20mg/L^{-1}$. The removals of T-N and T-P were relatively less effective and removal efficiencies were below 40%. It might meet the guidelines for T-P because of low levels of influent T-P concentration. However, the T-N concentration were too high and further treatment is required. The effluent concentration of $NH_4-N$ showed a significant reduction rate about 43.8%, but part of $NH_4-N$ was transformed to $NO_2-N$ and $NO_3-N$ inside the biofilter through nitrification process. The effluent concentration of org-P was removed about 78.8% of influent concentration by filtration. Considering stable performance and effective removal of pollutant in wastewater, low maintenance, and cost-effectiveness, the hydrophilic biofilter system was thought to be an effective and feasible alternative for decentralized rural areas.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.4
• /
• pp.213-220
• /
• 2019

The dry cleaning effect related to the type of soil and fiber was analyzed using silicone and alcohol-based solvents(ethyl alcohol, isopropyl alcohol, acetone) that are relatively safe for the human body and environment to improve the detergency of hydrophilic soils in dry cleaning system. Based on this analysis, an effective dry cleaning method to be carried out for improving the detergency according to the type of hydrophilic soils. After dry cleaning was performed using 20 types of artificial soiled fabrics consisting of 7 types of fibers and 4 types of hydrophilic soils, the detergency was measured and the results were compared and analyzed by solvents and fiber types. The results are presented as follows; first, the detergency of hydrophilic soils using silicone solvents showed a low rate of detergency. In particular, the tannin soil showed a lower level of detergency compared to the protein soil. Second, the detergency of hydrophilic soils using silicon solvents with dry soap differed in some detergency according to the soil and fiber types. Especially, the detergency of curry soil on cotton fabric showed significant improvement. Third, the protein soil was not removed from dry cleaning using alcohol-based solvents, but the effect of dry cleaning of curry soil on both cotton and polyester fabric was substantially improved. As a result, the elimination of blood soil is more effective in silicon solvents than in alcohol-based solvents. The removal of tannin soils may improve detergency by adding dry soap to silicon solvents or by using alcohol-based solvents as alternative solvents. The use of alternative solvents such as silicon and alcohol solvents can contribute to the environmental improvement of the dry cleaning industry, which uses petroleum-based solvents. It is also expected to provide consumers with the opportunity to choose eco-friendly and efficient dry cleaning methods.

• Fashion & Textile Research Journal
• /
• v.25 no.1
• /
• pp.119-126
• /
• 2023

This study aimed to determine the effects of relative humidity and fiber properties on the moisture permeability of multilayer systems by measuring water vapor transmission in the overlapping condition of various fabrics. The results confirmed that the property of the fabric in contact with the humid environment affects the moisture permeability. If the layer facing the humid environment is hydrophobic and the layer facing the dry environment is superhydrophobic, water vapor transmission increases by up to 17.8% compared to the opposite conditions. Comparing the correction values of the water vapor transmission reflecting the thickness of the specimen under the multilayer condition showed that permeability was higher when the hydrophilic or hydrophobic layer was facing the humid environment. The opposite was true from the "push-pull" effect of absorption mechanism. In the case of moisture permeability, the more hydrophilic the surface facing the humid environment, the more permeable that water vapor diffuses and passes through. It was concluded that the "pull-push" effect, in which water vapor diffuses widely through the hydrophilic facing a humid environment and then passes through the hydrophobic layer, contributes to the improvement of permeability. Permeability differed according to the multilayer overlapping condition. When the relative humidity was high, the "pull-push" effect was insignificant. This is caused by water droplets absorption after the partial migration of water due to condensation. These results suggest that the overlapping conditions and properties of fabrics should vary depending on heavy sweating or not.

• Journal of Korean Society on Water Environment
• /
• v.21 no.2
• /
• pp.205-210
• /
• 2005

There has been a growing interest in NF membrane for drinking water treatment, because it can remove simultaneously both hardness and hazardous micro pollutants such as pesticides and THM precursors. In this work, a hollow fiber NF membrane known as a composite membrane was employed for the rejection properties of both hydrophilic solutes and micro organic pollutants, where the former was used to evaluate the molecular sieving effect of this membrane and the latter was employed for the investigation of solute-membrane interaction as hydrophobic materials. This membrane effectively rejected the hydrophilic solutes and the permeation of them was mainly controlled by the molecular sieving effects such as molecular weight and molecular width. In the case of all micro organic pollutants, the rejections were varied from 42.2% for Simazine to 91.6% for Malathion, and the parameters related to the steric hindrance could significantly play an important role in the rejection. In the batch type adsorption experiments, all micro organic pollutants were entrapped mildly on the membrane in spite of lower degree compared with that of aromatic compounds, and they were correlated with log K.

• Journal of Environmental Science International
• /
• v.25 no.5
• /
• pp.625-633
• /
• 2016

This study was conducted to investigate the influence of hydrophilic polymer (HP) mixture ratio (Control, 1.0%, 2.5%, 5.0%, and 10.0%) on growth of eggplant (Solanum melongena) for lower maintenance urban agriculture via green roofs. Although it was not statistically significant (p > 0.05), substrate temperature was decreased as hydrophilic polymer mixture ratio were increased. High substrate water content (95%) was found consistently in growing media under elevated hydrophilic polymer mixture ratio at over 5% during the entire growing period. Substrate electronic conductivity was increased as hydrophilic polymer mixture ratio were increased. Growth index was decreased as hydrophilic polymer mixture ratio was increased. It was reduced about 1/3 and 1/5 compared to that of Control in HP5.0 and HP10.0 treatment plants, respectively. Number of leaves, leaf length, and leaf width were decreased in following order: Control> HP1.0> HP2.5> HP5.0> HP10.0 treatments. There numbers were significantly lower in HP5.0 and HP10.0 treatment plants. Dry weight of shoot and root were decreased as hydrophilic polymer mixture ratio was increased. They were reduced by 1/4 compared to those of Control treatment plants. In addition, visual value was decreased as hydrophilic polymer mixture ratio was increased. Plants grown in HP1.0, HP2.5, and HP5.0 treatments all survived. However, plants grown in the HP10.0 treatment had the lowest survival rate (56%) after 3 months of growing. These results indicate that the advantage of adding hydrophilic polymer to green roof growing media may greater during dry periods. However, the proper mixture proportion of hydrophilic polymer should be determined according to different characteristics of growing media and plant species.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.373-380
• /
• 2020

This study was carried out to convert the hydrophobic characteristics of PVDF to hydrophilic. Poly(-vinylidene fluorine) (PVDF) was grafted by electron beam irradiation and sulfonated. The grafting degree of modified PVDF increased with the monomer concentration, but not the conversion degree. From the results of FTIR and XPS, it was shown that the amount of converted sulfur increased with the grafting degree. The radiation-induced graft polymerization led to decrease fluorine from 35.7% to 21.3%. Meanwhile, the oxygen and sulfur content increased up to 8.1% and 3.2%. The pore size of modified membranes was shrunken and the roughness sharply decreased after irradiation. The ion exchange capacity and contact angle were investigated to show the characteristics of PVDF. The enhanced ion exchange capacity and lower contact angle of modified PVDF showed that the hydrophilicity played a role in determining membrane fouling. Electron beam irradiation successfully modified the hydrophobic characteristics of PVDF to hydrophilic.

• YAKHAK HOEJI
• /
• v.49 no.1
• /
• pp.68-73
• /
• 2005

Epi-xanthatin analogs containing hydrophilic substituents such as carboxylic acid, alcohol, morpholine, amino acid, and glucose derivatives were synthesized and their in vitro cytotoxicity and in vivo antitumor activity were evaluated. The target compounds were generally cytotoxic against tumor cell lines of human origin with $ED_{50}$ values of $0.1{\sim}30{\mu}g/ml$, except the highly hydrophilic analog 6 containing aspartic acid. Contrary to the potent cytotoxicity weakly hydrophilic analogs 2 and 8 were not active in vivo, or even toxic to the test animals. As a result, hydrophilic analog of epi-xanthatin did not show in vitro cytotoxicity and hydrophobic analogs did not show in vivo antitumor activity, thus it is presumed that amphiphilic analogs or those with medium hydrophilicity would exhibit the antitumor potency in vivo.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.2 s.120
• /
• pp.9-16
• /
• 2007

Biological treatment using the activated sludge method and biofilm process has been developed for paper wastewater treatment. It is known that a water treatment using biofilm process has a high efficiency be-cause a great deal of microorganism could adhere to media. It is also known that various plastics such as polyurethane and polyethylene have been used as the media. In this study polyethylene was used as a media and rice straw an additive agent to improve porous and hydrophilic properties of the media for waste water treatment. Porosity and hydrophilic characteristics of polyethylene was increased as rice straw was added to polyethylene. Paper wastewater was then treated with newly developed environment materials. Rice straw showed excellent results in waste water treatment in various media. This environmentally friendly material prepared by polyethylene and rice straw could show similar results to those of a commercial porous polyurethane foam in wastewater treatment.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.343-348
• /
• 2018

Preliminary study was perfomed to develop a biocompatible filter material using radiation energy. Electrosppined PLLA nano sheets were surface-modificated with hydrophilic groups(acrylic group) by using radiation. The physico-chemical and morphological characteristics of modified PLLA sheets were measured by ATR, SEM, contact angle, and hydrophilic (acryl group) introduction rate (TBO). As a result, there was no morphological(fiber structure) structure change due to radiation, and it was confirmed that an acrylic group was successfully introduced onto PLLA fiber sheet by radiation.