• 청정기술
• /
• 제27권2호
• /
• pp.107-114
• /
• 2021

Mg₂NiH_x-5 wt% CaO 수소 저장 복합재료의 합성 공정에 대한 환경 영향 특성을 분석하기 위해 물질전과정평가(material life cycle assessment, MLCA)를 수행하였다. MLCA는 Gabi 소프트웨어를 사용하였으며, Eco-Indicator 99' (EI99)와 CML 2001 방법론을 기반으로 하여 분석하였다. Mg₂NiH_x-5 wt% CaO 복합재료는 수소 가압형 기계적 합금화법(hydrogen induced mechanical alloying, HIMA)에 의해 합성되었다. X-선 회절분석기(X-ray diffraction, XRD), 주사전자현미경(scanning electron microscopy, SEM), 에너지 분산형 X-선 분광법(energy dispersive X-ray spectroscopy, EDS), 비표면적 분석(Bruner-Emmett-Teller, BET), 열중량 분석(thermogravimetric analysis, TGA)을 이용하여 복합재료의 야금학적, 열화학적 특성을 분석하였다. CML 2001 및 EI99 방법론을 토대로 MLCA를 수행하여 분석한 정규화 결과, Mg₂NiH_x-5 wt% CaO 복합재료는 지구온난화(GWP)와 화석연료의 환경 부하 값에서 가장 높은 수치를 나타내었다. 이는 CaO 첨가에 따른 제조 공정에서의 추가적인 전기 사용으로 인한 것으로 판단된다. 따라서 향후 합금 설계 시에 제조 공정 시간 단축을 통한 공정 최적화 및 친환경적인 대체물질을 탐구하여 환경적인 요인을 고려한 연구를 모색해 볼 필요가 있다.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.123-129
• /
• 2019

With recent demand for the renewable energy resources, we conducted a research on the energy conversion and storage device of supercapacitor. The hybrid graphene-zinc oxide(GZO) electrodes for the supercapacitors (SCs) were fabricated and investigated. To increase the electrical conductivity of the GZO electrode, the rapid thermal annealing(RTA) in $Ar/H_2$(10%) atmosphere was applied and the effect was examined by comparing it with RTA at Ar atmosphere. In Raman spectroscopy, the electrodes annealed at 400? in $Ar/H_2$ atmosphere showed a lower ratio of D/G peak than that of annealed at Ar atmosphere, and had a larger specific capacitance(Sc) in the cyclic voltammetry(CV), and a lower the equivalent series resistance(ESR) in the electrochemical impedance spectroscopy(EIS). The reason seems to come from the better mixing of the graphene and zinc oxide by the RTA in $Ar/H_2$(10%).

• 한국재료학회지
• /
• 제17권1호
• /
• pp.37-42
• /
• 2007

The effects of immersion time in the liquid nitrogen and deformation-induced martensitic transformation on the behavior of austenite stainless steels used for the hydrogen storage tank of auto-mobile at cryogenic temperature were investigated. With increasing of immersion time in the liquid nitrogen, the tensile strength of all austenite stainless steels at cryogenic temperature was increased because the martensite transformation of unstable austenite. The restraint of crack generation ana transmission also increased the tensile strength by the active ${\alpha}'$ transformation. The elongation decreasing of 321 steel is not the mechanical deformation of austenite phase but the stress induced martensite phase during the tensile test.

• 한국수소및신에너지학회논문집
• /
• 제8권2호
• /
• pp.79-90
• /
• 1997

Extensive work has been done on investigating the inner cell pressure characteristics of sealed type Ni-MH battery in which Zr-Ti-Mn-V-Ni alloy is used as anode. The inner cell pressure of this type Ni-MH battery much more increases with the charge/discharge cycling than that of the other type Ni-MH battery where commercialized $AB_5$ type alloy is used as anode. The increase of inner cell pressure in the sealed type Ni/MH battery using Zr-Ti-Mn-V-Ni alloy system is mainly due to the accumulation of oxygen gas during charge/discharge cycling. The accumulation of oxygen gas arises mainly due to the low rate of oxygen recombination on the MH electrode surface during charge/discharge cycling. The difference of oxygen recombination rate between $AB_5$ type electrode and Zr-Ti-Mn-V-Ni electrode is caused by the difference of electrode reaction surface area resulting from different particle size after their activation and the difference of surface catalytic activity for oxygen recombination reaction, respectively. After EIS analysis, it is identified that the surface catalytic activity affects much more dominantly on the oxygen recombination reaction than the reaction surface area does. In order to suppress the inner cell pressure of Ni-MH battery where Zr-Ti-Mn-V-Ni is used as anode, it is suggested that the surface catalytic activity for oxygen recombination should be improved.

• 한국수소및신에너지학회논문집
• /
• 제10권1호
• /
• pp.9-17
• /
• 1999

기계적인 합금처리된 여러 Mg-Ni 혼합물 중에서 가장 우수한 수소저장 성질을 가지고 있는 Mg-25wt.%Ni 혼합물의 수소화물 형성 및 분해 반응에 대한 반응속도론적 연구를 하였다. 수소화물 형성 및 분해 속도를 측정하여 이론적인 반응 속도식과 비교함으로써 율속 단계를 결정하였다. Mg-25wt.%Ni의 수소화물 형성의 율속단계는 $H_a$ = 4.0 미만의 여러 $H_a$ 범위에서는 입자간 통로 (interparticle channel), 입자의 갈라진 틈(crack) 등을 통한 수소 분자의 이동 단계인 Knudsen 유동과 보통의 기체 확산이고, 4.0 < $H_a{\leq}4.25$ 범위에서는 성장하는 수소화물 층을 통한 수소 원자의 확산으로 생각된다. Mg-25wt.%Ni의 수소화물 분해의 율속 단계는 전 $H_d$ 범위에 걸쳐 수소 분자의 이동 단계인 Knusden 유동과 보통의 기체 확산이다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2004년도 추계학술발표회 논문집
• /
• pp.78-81
• /
• 2004

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2005년도 추계학술발표회 논문집
• /
• pp.163-166
• /
• 2005

• 한국재료학회지
• /
• 제29권12호
• /
• pp.812-817
• /
• 2019

A zinc-air battery is one of most promising advanced batteries due to its high specific energy density, low cost, and environmental friendliness. However, zinc anodes in zinc-air batteries lead to several issues including self-discharge, corrosion reaction, and hydrogen evolution reaction (HER). In this paper, viscosity of electrolyte has been controlled to suppress the corrosion reaction, HER, and self-discharge behavior. Various viscosity average molecular weights of poly(acrylic acid) (PAA) are adopted to prepare the electrolyte. The evaporation of electrolytes is proportional to the increase in molecular weight. In addition, enhanced self-discharge behavior is obtained when the gelling agent with high molecular weight is used. In addition, the zinc-air cell assembled with lower viscosity average molecular weight of PAA (M_v ~ 450,000) delivers 510.85 mAh/g and 489.30 mAh/g of discharge capacity without storage and with 6 hr storage, respectively. Also, highest capacity retention (95.78 %) is obtained among studied materials.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2000년도 추계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.10-10
• /
• 2000

Mechanical alloying (MA) is a powder metallurgy processing technique involving cold welding, fracturing, and rewelding of powder particles in a high-energy ball mill. This has now become an established commercial technique in producing oxide dispersion strengthened (ODS) nickel- and iron-based materials. The technique of MA is also capable of synthesizing non-equilibrium phases such as supersaturated solid solutions, metastable crystalline and quasicrystalline intermetallic phases, nanostructures, and amorphous alloys. In this respect, the capabilities of MA are similar to those of another important non-equilibrium processing technique, viz, rapid quenching of metallic melts. however, the science of MA is being investigated only during the past ten years or so. The technique of mechanochemistry, on the other hand, has had a long history and the materials produced this way have found a number of technological applications, e.g., in areas such as hydrogen storage materials, heaters, gas absorber, fertilizers. catalysts, cosmetics, and waste management. The present talk will concentrate on the basic mechanisms of formation of non-equilibrium phases by the technique of MA and these aspects will be compared with those of rapid quenching of metallic melts. Additionally, the variety of technological applications of mechanically alloyed products will be highlighted.

• Carbon letters
• /
• 제13권1호
• /
• pp.48-50
• /
• 2012

Mass production of graphene-based materials, which have high specific surface area, is of importance for industrial applications. Herein, we report on a facile approach to produce thermally modified graphene oxide (TMG) in large quantities. We performed this experiment with a hot plate under environments that have relatively low temperature and no using inert gas. TMG materials showed a high specific surface area (430 $m^2g^{-1}$). Successful reduction was confirmed by elemental analysis, X-ray photoelectron spectroscopy, thermogravimetic analysis, and X-ray diffraction. The resulting materials might be useful for various applications such as in rechargeable batteries, as hydrogen storage materials, as nano-fillers in composites, in ultracapacitors, and in chemical/bio sensors.