• 한국식품과학회지
• /
• 제17권2호
• /
• pp.89-94
• /
• 1985

팽창된 과일 통조림을 수집하여 팽창된 원인이 화학적 반응에 의한 수소팽창 때문인지 또는 미생물에 의한 부패인지를 조사하였고 미생물에 의한 부패로서 효모가 부패 미생물로 밝혀졌을 때는 속 종까지 동정하였다. 전체적으로 볼 때 깐포도 통조림은 수소팽창에 의해 팽창된 비율이 88%였으나 복숭아 통조림은 24% 뿐이었고, 미생물에 의한 부패율이 76%로서 같은 산성 식품이라고 하더라도 이들 두 제품의 주요 팽창원인이 현저히 다르게 나타났는데, 그 이유는 다음과 같이 판단된다. 깐포도 통조림의 정상적인 pH범위(3.1-3.4)는 복숭아 통조림의 pH범위(3.6-4.3)에 비해 낮기 때문에 수소팽창이 잘 일어나고 이와같이 복숭아 통조림의 높은 PH가 미생물 번식에 유리함은 물론 기타의 다른 복숭아 통조림의 제품특성이 가열 살균효과에 영향을 주었을 것으로 추정된다. 그리고 가장 흔히 발견된 부패효모는 Saccharomyces속과 Torulopsis속의 효모로 밝혀졌고 기타 Candida속이나 Pichia 속의 효모도 낮은 빈도로 발견되었다.

• 대한본초학회지
• /
• 제28권5호
• /
• pp.45-52
• /
• 2013

Objectives : This study aims at examining the immuno-modulating activity in the fermentative extract of the root of Scutellaria baicalensis Georgi (Scutellariae Radix) on the production of inflammatory mediator in LPS-stimulated RAW264.7 mouse macrophages. Method : Measurements were done for the influences on the cell viability, generation of hydrogen peroxide in cells and nitric oxide (NO) generation using the macrophage of mouse with the specimen SBS as the fermentative extract of Scutellariae Radix (SBS) with Saccharomyces cerevisiae STV89. Result : As a result of carrying out MTT assay to check the cellular toxicity of the fermentative extract of Scutellariae Radix, any excessive toxicity to the macrophage did not occur from treatments by concentration for SBS. SBS increased the generation of hydrogen peroxide in the macrophage. SBS suppressed the NO generated in macrophages and SBS concentration higher than $25{\mu}g/mL$ significantly suppressed the increased NO generated in LPS-stimulated macrophages. SBS concentration higher than $25{\mu}g/mL$ significantly suppressed the generation of IL-6, IL-10, IL-12p40 and MCP-1 in LPS-stimulated macrophages. Conclusion : Our findings indicate that SBS has an immuno-modulating activity in macrophage activation through suppressing the generation of inflammatory substances, NO, IL-6, IL-10, IL-12p40 and MCP-1.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.643-659
• /
• 2022

For the economic analysis of fuel cells, levelized cost of electricity was calculated according to the type, capacity, and annual production of the fuel cells. The cost of every component was calculated through the system component breakdown. The direct cost of the system included stack cost, component cost, assembly, test, and conditioning cost, and profit markup cost were added. The effect of capacity and annual production was analyzed by fuel cell type. Sensitivity analysis was performed according to stack life, capital cost, project period, and fuel cost. As a result, it was derived how much the economic efficiency of the fuel cell improves as the capacity increases and the annual production increases.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 추계학술대회 논문집
• /
• pp.235-240
• /
• 2008

The recent development of efficient thermal prime movers for distributed generation id changing the focus of the production of electricity from large centralized power plants to local generation units scattered over the territory. The scientific communality is addressing the analysis and planning of the distributed energy resources(der) with wide spread approaches, taking into account technical, environmental, economical and social issues. The coupling of cogeneration system to absorption/electric chillers or heat pumps as well as the interactions with renewable sources, allow for setting up multi-generation systems for building cooling heating and power(BCHP) systems of different energy vectors such as electricity, heat(at different enthalpy levels), cooling power, hydrogen, various chemical substances and so forth. Adoption of the composite multi-generation systems may lead to significant benefits in term of higher efficiency, reduced $CO_2$ emissions and enhanced economy. This paper outlines the main aspects of the BCHP system framework, illistrating its characteristics and summarizing the relevant distributed multi-generation structures.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권4호
• /
• pp.291-297
• /
• 2015

미래의 화석연료를 대체할 가능성이 큰 에너지원으로써, 수소는 인류의 궁극적인 연료로 주목받고 있으나, 작은 분자 크기로 인하여 저장 용기의 작은 틈으로부터 쉽게 누설된다. 본 연구에서는 수소 누설을 탐지하기 위하여 레이저 유도 붕괴 분광법(Laser Induced Breakdown Spectroscopy, LIBS)을 사용하였고, 플라스마 생성 방법에 따른 본 기술의 적합성을 평가하였다. 금속 표면에 플라스마를 일으켜 수소 원자광을 얻는 방법은 플라스마를 작은 레이저 출력 (295mW)에서 유도 할 수 있지만, 수소 기체에 직접 플라스마를 유도하는 방법은 약 2.6배 높은 레이저 출력이 필요하였다. 두 방법 모두 픽 투 베이스(Peak to Base) 비율이 수소농도에 대하여 선형적인 경향을 보였으며, 공기 중 수소의 농도가 5% 미만인 경우 본 기술은 수소 누설 검출에 적합한 기술로 판단된다.

• 한국전산유체공학회지
• /
• 제10권3호
• /
• pp.9-18
• /
• 2005

During a hypothetical severe accident in a nuclear power plant (NPP), hydrogen is generated by the active reaction of fuel-cladding and steam in the reactor pressure vessel and released with steam into the containment. In order to mitigate hydrogen hazards possibly occurred in the NPP containment, hydrogen mitigation system (HMS) is usually adopted. The design of the next generation NPP (APR1400) designed in Korea specifies 26 passive autocatalytic recombiners and 10 igniters installed in the containment for the hydrogen mitigation. in this study, the analysis of the hydrogen and steam behavior during a total lose of feed water (TLOFW) accident in the APR1400 containment has been conducted by using the CFD code GASFLOW. During the accident, a huge amount of hot water, steam, and hydrogen is released in the in-containment refueling water storage tank (IRWST). The current design of the APR1400 includes flap-type dampers at the IRWST vents which are operated depending on the pressure difference between inside and outside of the IRWST. it was found that the flaps strongly affects the flow structure of the steam and hydrogen in the containment. The possibilities of a flame acceleration and transition from deflagration to detonation (DDT) were evaluated by using Sigma-Lambda criteria. Numerical results indicate the DDT possibility could be heavily reduced in the IRWST compartment when the flaps are installed.

• 대한금속재료학회지
• /
• 제49권3호
• /
• pp.264-269
• /
• 2011

Hydrogen and hydrogen energy have been recognized as clean energy sources and high energy carrier. Mg and Mg alloys are attractive hydrogen storage materials because of their lightweight and low cost materials with high hydrogen capacity (about 7.6 wt.%). However, the commercial applications of the Mg hydrides are currently hinder by its high absorption/desorption temperature, and very slow reaction kinetics. However, Ti and Ti based hydrogen storage alloys have been thought to be the third generation of alloys with a high hydrogen capacity, which makes it difficult to handle because of high reactivity. One of the most methods to develope kinetics was addition of transition metal. Therefore, Mg-Ti-Cr-Nb alloy was fabricated to add TiCrNb by hydrogen induced mechanical alloying. TiCrNb systems have included transition metals, low operating temperatures and hydrogen storage materials. As-received specimens were characterized using X-ray Diffraction analysis (XRD), Scanning Electron Microscopy (SEM) and Thermo Gravimetric analysis/Differential Scanning Calorimetry (TG/DSC). $Mg-TiCr_{10}Nb$ systems were evaluated for hydrogen kinetics by Sievert's type Pressure-Composition-Isotherm (PCI) equipment. The operating temperature range was 473, 523, 573 and 623 K.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.34-50
• /
• 2022

파리 기후 협약 이후 온실 가스 감축은 전세계적으로 가장 중요한 문제이다. 특히 상당한 온실 가스를 배출하는 교통 운송 부문의 화석 연료 감축이 시급하다. 본 논문에서는 이에 대한 대안으로 재생에너지원에서 생산된 전기 에너지로 수소를 생산하여 수소 자동차에 연료로 공급하는 그린 모빌리티 에너지 시스템의 경제성을 검토하였다. 시스템 설계에 필요한 재생에너지 발전, 수전해 통한 수소 생산, 수소 저장과 충전소 등 여러가지 결정사항들에 대해 9 가지 시나리오를 구성하여 그에 대한 최적 설계 및 운영 비용을 분석하였다. 본 연구에서 얻어진 경험은 현실적 수소 에너지 시스템을 구축하는데 활용될 수 있을 것이다.

• 한국수소및신에너지학회논문집
• /
• 제34권4호
• /
• pp.358-368
• /
• 2023

The fuel cell market is expected to grow rapidly. Therefore, it is necessary to scale up fuel cells for buildings, power generation, and ships. A multi-stack system can be an effective way to expand the capacity of a fuel cell. Multi-stack fuel cell systems are better than single-stack systems in terms of efficiency, reliability, durability and maintenance. In this research, we developed a residential fuel cell stack and system model that generates electricity using the fuel cell-photovoltaic hybrid system. The efficiency and hydrogen consumption of the fuel cell system were calculated according to the three proposed power distribution methods (equivalent, Daisy-chain, and optimal method). As a result, the optimal power distribution method increases the efficiency of the fuel cell system and reduces hydrogen consumption. The more frequently the multi-stack fuel cell system is exposed to lower power levels, the greater the effectiveness of the optimal power distribution method.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.118-127
• /
• 2007

SAW(Submerged Arc Welding) process is generally applied to a wide range of welding area in the fabrication of steel structure. This process has a good characteristic properties such as the high quality of welds and the high deposition rates, but in case of welding on a thick steel plate, it also has higher cold crack susceptibility than that of a thin steel plate. The purpose of this research is to find the main factor of crack generation and clarify the countermeasure for crack prevention, and then establish the optimum welding condition in a heavy thick steel plate. The results of this study are as follows, 1. The cause of crack generation is found the diffusible hydrogen penetrated into weld metal by decomposition of the remained moisture in SAW flux during welding. 2. For the removal of diffusible hydrogen, the raw materials of SAW flux are to be dehydrated at the high temperature in the initial manufacturing stage. 3. Mechanical properties of weld metal welded with the dehydrated SAW flux were evaluated very excellent, furthermore the weld metal has been proved to have low diffusible hydrogen content with 3.1ml /100g. 4. The weldability and quality welded with thick steel plates were improved by establishing the new optimum welding condition.