• 전기학회논문지P
• /
• 제58권4호
• /
• pp.639-643
• /
• 2009

A reformer, which produces hydrogen from natural gas, plays a major role for producing quality hydrogen to fuel-cell system. In this paper, fuel processor is designed to deliver hydrogen(75%) from the reformer to 200W fuel-cell system, and the electrical output power of the fuel-cells is examined by being injected different hydrogen concentrations to the system. We verified that the output power characteristics of the fuel-cells with 75% reformed hydrogen was lower about 7% than the case of pure hydrogen supplied. The type of reformer in this experiment takes SMR(Steam methane reforming) process, and the temperature variation characteristics of reforming process by reactions are examined in operation.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.129-132
• /
• 2011

This paper presents small hydrogen regulator for the mobile fuel cell. Mobile fuel cell is generally classified into open-end type and dead-end type. In the open-end type, flow rate of hydrogen is constantly controlled, while pressure of hydrogen is constantly maintained in the dead-end type. Considering the efficiency and stability of the fuel usage, dead-end type is more suitable with mobile fuel cell. Mobile fuel cell operated by dead-end mode requires hydrogen regulator which controls the hydrogen pressure from 0.1bar to 0.5bar within 3% error. In this paper, small hydrogen regulator (volume of 2.6cc) was fabricated by stainless steel. Regulation characteristics was experimentally evaluated.

• 신재생에너지
• /
• 제20권1호
• /
• pp.110-115
• /
• 2024

Global sustainable energy needs and carbon neutrality goals make hydrogen a key future energy source. South Korea and Japan lead with proactive hydrogen policies, including South Korea's Hydrogen Law and Japan's strategy updates aiming for a hydrogen-centric society by 2050. A notable advance is the solar thermal chemical water-splitting cycle for green hydrogen production, spotlighted by Korea Institute of Energy Research (KIER) and Niigata University's joint initiative. This method uses solar energy to split water into hydrogen and oxygen, offering a carbon-neutral hydrogen production route. The study focuses on international collaboration in solar energy for thermochemical water-splitting and E-fuel production, highlighting breakthroughs in catalyst and reactor design to enhance solar thermal technology's commercial viability for sustainable fuel production. Collaborations, like ARENA in Australia, target global carbon emission reduction and energy system sustainability, contributing to a cleaner, sustainable energy future.

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.150-156
• /
• 2022

This study proposes a design method of fuel cell DC/DC converter using in 5-ton forklift. For efficient hydrogen usage, targeted fuel cell system recirculates discarded hydrogen after fuel cell reaction. Recirculating hydrogen contains much impurities that reduces output power, increasing pressure that can damage the internal fuel cell reaction system. The proposed DC/DC converter effectively converts fuel cell power considering the voltage drop rate to reflect the recirculating hydrogen. Then, frequency control method is used to regulate the current ripple amount for battery and fuel cell hybrid configuration. Proposed power converter system design and control methods are verified in a practical fuel cell system that implements recirculating hydrogen.

• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.149-154
• /
• 2023

In the Fourth Industrial Revolution, hydrogen energy is in the spotlight. There is a difficulty in commercialization due to the lack of hydrogen infrastructure. Therefore, a lot of hydrogen should be imported and a method using ammonia is the most useful. In this study, using the mixed gas of hydrogen and nitrogen generated when ammonia is decomposed, the hydrogen separation performance is to be tested. Hydrogen was separated using an electrochemical hydrogen compressor based on a fuel cell and the experiment was conducted by changing the ratio of hydrogen and nitrogen. In addition, the performance was also compared by the difference both the pressure and the membrane.

• 한국수소및신에너지학회논문집
• /
• 제19권2호
• /
• pp.118-123
• /
• 2008

For the hydrogen recirculation system of the PEMFC (polymer electrolyte membrane fuel cell), the ejector is useful to improve the efficiency of the fuel cell system. However, conventional ejector does not keep its entrainment ratio good when the various power duties is required by the fuel cell system. In this study, the variable multi-ejector acceptable in the whole duty range required from the fuel cell hybrid mini-bus is developed. Consequently, the performance of the developed ejector is verified by the experiments based on the real operating conditions.

• 한국수소및신에너지학회논문집
• /
• 제21권4호
• /
• pp.346-353
• /
• 2010

Hydrogen fueled vehicle was evaluated as one of the next-generation technology that will be able to solve the global warming, depletion of fossil fuel and etc. The practical use of hydrogen fueled vehicle, nevertheless, is being delayed more than expected schedule due to various causes. In order to promote the dissemination of hydrogen fueled vehicle, development status and obstacle factors of practical use for hydrogen fueled vehicles were reviewed and the strategy plans for dissemination promotion were proposed. Hydrogen fueled vehicles are included the hydrogen fuel cell, neat and enriched hydrogen fueled engines. The technicalness, economy, safety, cognizance, system, support and etc were considered in the strategy plans.

• 한국수소및신에너지학회논문집
• /
• 제26권1호
• /
• pp.35-44
• /
• 2015

This paper deals with the economic analysis of domestic fuel cell vehicles considering subsidy and hydrogen price in 2015 and 2025. We selected TFCV (Tucson fuel cell vehicle) and TDV (Tucson diesel vehicle) to identify the economic feasibility of fuel cell vehicles compared with conventional internal combustion engine vehicles. We made some sensitivity analysis by changing input factors such as the size of the subsidy, the hydrogen price and the discount rate. Also, we made a break-even point analysis on hydrogen prices that equalize the economic feasibility of TFCV and TDV in 2025. As a result, TFCV is not economical in 2015 due to the relatively high prices of hydrogen and vehicles. If the sale prices of TFCV are 30,000,000 won and 35,000,000 won in 2025, then the break-even points of hydrogen prices are equal to 7,483 won/kg and 5,043 won/kg.

• 한국수소및신에너지학회논문집
• /
• 제24권6호
• /
• pp.480-486
• /
• 2013

In this study, tubular SOFC unit cell with advanced anode current collector was fabricated to improve the cell performance. First, we prepared two types of single cells having the same manufacture processes such as the same electrolyte, electrode coating condition and sintering processes. And then to compare the developed single cell performance with conventional cells, we changed the anode current collecting methods. From the impedance analysis and I-V curve analysis, the cell performance of advanced cell is much higher than that of conventional cell.

• 한국수소및신에너지학회논문집
• /
• 제24권6호
• /
• pp.467-471
• /
• 2013

In present work, optimized the manufacturing process of anode-supported tubular SOFCs cell and stack were studied. For this purpose, we first developed a high performance tubular SOFC cell, and then made electrical connection in series to get high voltage. The gas sealing was established by attaching single cells to alumina jig with ceramic bond. Through these process, we can obtain such high OVP as around 15V, which means that the electrical connection and gas sealing were optimized. Finally we developed a new tubular SOFC stack which shows a maximum power of 65W @ $800^{\circ}C$.