• Membrane Journal
• /
• v.32 no.6
• /
• pp.486-495
• /
• 2022

This study presents the improved recovery efficiency of rare metal ions through the modified separation membrane wettability and hydrogen ion permeation in the anion exchange membrane (AEM) under the recovery process of combined electrodialysis and solvent extraction. Specifically, the wettability of the separator was enhanced by hydrophilic modification on one separator surface through polydopamine (PDA) and lipophilic modification on the other surface through SiO₂ or graphene oxide (GO). In addition, the modified surface of AEM with polyethyleneimine (PEI), PDA, poly(vinylidene fluoride) (PVDF), etc. reduces the water uptake and modify the pore structure for proton ions generation. The suppressed transport resulted in the reduced hydrogen ion permeation. In the characterization, the surface morphology, chemical properties and composition of membrane or AEM were analyzed with Scanning Electron Microscopy (SEM) and Fourier Transform-Infrared Spectroscopy (FT-IR). Based on the analyses, improved extraction and stripping and hydrogen ion transport inhibition were demonstrated for the copper ion recovery system.

• Analytical Science and Technology
• /
• v.7 no.3
• /
• pp.261-269
• /
• 1994

The iodide formed stoichiometrically for sulfide by its oxidation with iodate was extracted as an ion-pair with methylene green into 1,2-dichloroethane and the extract was measured spectrophotometrically at 656nm for the determination of sulfide. Hydrogen sulfide separated from the sample matrix was introduced into a solution containing pH 3.5 acetate buffer and iodate, in which the hydrogen sulfide was completely converted into iodide. A linear calibration graph was obtained over the range $3{\times}10^{-7}{\sim}1.2{\times}10^{-5}M$ sulfide($0.0096{\sim}0.384{\mu}g$ of $S^{2-}/ml$) and the detection limit was $0.0032{\mu}g/ml$. The apparent molar absorptivity and a correlation coefficient(r) were $6.7{\times}10^4L\;mole^{-1}\;cm^{-1}$ and 0.999, respectively. When applied to the stream water samples, the proposed method gave a relative standard deviation of 1.59% at $5{\times}10^{-6}M$ sulfide level.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.281-286
• /
• 2009

Bitumen extraction and sulfur removal from Athabasca oil sand were conducted using water in sub- and supercritical condition. Bitumen yield in micro reactor was investigated in the pressure range of 15~30 MPa, the temperature of 360 and $380^{\circ}C$ and water density $0.074{\sim}0.61g/cm^3$ for 0~120 min. Bitumen yield increased with reaction pressure irrespective of temperature and dramatically increased in especially supercritical region due to hydrogen formed from water gas shift reaction. Total amount of gas product decreased with reaction pressure but the portion of sulfur and hydrogen increased a little with increasing pressure to 25 and 30 MPa. It is seen that supercritical condition was favourable to the hydrogen formation and sulfur removal. Bitumen yield and sulfur removal from original oil sand reached a maximum 22% and 40% respectively in supercritical condition(the reaction time of 60 min at $380^{\circ}C$ and 25 or 30 MPa).

• Korean Journal of Food Science and Technology
• /
• v.25 no.3
• /
• pp.204-209
• /
• 1993

The dried cinnamon was extracted with 12 solvents and studied the extraction conditions of temperature, time, solvent addition ratio and number of extraction for their effects on chemical and antioxidant properties of the extracts. It was found that a relatively higher antioxidant activity expressed as hydrogen donating activity was obtained from water and 70% ethanol extraction among 12 solvents investigated. The solvents of water and 70% ethanol were further studied for effects of several extraction conditions. At the temperature range of $20{\sim}100^{\circ}C\;and\;2{\sim}10$ hours of extraction, the antioxidant activity and % total phenol was significantly increased as the temperature raised up to $80^{\circ}C$ and extraction extented to 8 hours, while the solvent ratio of more than 20 times to dried cinnamon affected little. Soluble materials and degree of browning measured absorbances at 285 and 490nm were also increased at higher temperature. A significant decrease in antioxidant activity and other characteristics was measured in the extracts prepared from third times of extraction.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.E
• /
• pp.27-40
• /
• 1998

The solubility characteristics of organic compounds were studied in terms of the extraction efficiency as a function of the polarity of the organic solvent, and the acidity of water in urban aerosol samples collected in University of East Anglia (UEA), Norwich, England. The extraction efficiency of organic compounds were evaluated with respect to the organic carbon, -nitrogen and -hydrogen by means of a wide range of solvent which include polar and nonpolar organic solvents as well as acids and alkaline water. In addition, after being dissolved in aqueous solution, the aqueous chemistry of organic compounds were studied in terms of the organic metal complexes in aerosol, which were studied with oxalic acid, copper, and zinc. The results of this study indicate that solubility characteristics of organic compounds depend on the polarity of the solvents and the acidity of the solvents. In particular, some organic compounds are water soluble, even though they are much smaller than acetone soluble fractions. In the comparison between polar organic solvent extraction and non- polar organic solvent extraction, it can be thought that significant fraction of organic compounds analysed in the aerosol samples, are polar organic compounds because of the higher extraction efficiencies of organic compounds in polar organic solvent extraction than in nonpolar organic solvent extraction. Regarding the study of the oxalic -metal complexes, it can be thought that most oxalic acids are present in the form of oxalic -copper complexes in the aerosols collected at UEA.

• ALGAE
• /
• v.28 no.4
• /
• pp.371-378
• /
• 2013

Water and methanolic extracts of Ecklonia cava, a marine brown alga, were prepared by ultrasonic extraction (UE) and conventional extraction (CE) methods. The radical-scavenging activity and the inhibitory effects against hydrogen peroxide ($H_2O_2$)-induced DNA damage of the extracts were investigated. All extracts prepared by CE exhibited higher total polyphenolic content than that in the extracts prepared by UE. Extraction yield and total phenolic content increased as the UE time increased. The radical-scavenging activities increased as the UE time increased. All extracts prepared by CE exhibited higher 1,1-diphenyl-2-pricrylhydrazyl (DPPH) and hydroxyl radical-scavenging activities than did those prepared by UE. Extracts prepared by UE showed stronger scavenging activities on alkyl radical and $H_2O_2$ than those prepared by CE did. Methanolic extract with UE 12 h (100MEU-12h) and methanolic extract with CE 24 h (100MEC-24h) were selected and evaluated by comet assay for their inhibitory effect against $H_2O_2$-induced DNA damage. 100MEU-12h showed slightly greater protective effect against $H_2O_2$-induced DNA damage than 100MEC-24h. Thus, UE can be effectively used as a seaweed extraction technique, and there is potential for scale-up of the extraction process.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.4
• /
• pp.732-736
• /
• 2000

The purpose of this study was to investigate the extraction method of phenolic compounds and antioxidant activities of the aerial part of Epimedium koreanum NAKAI (EKN). The antioxidant activities of EKN were tested with by hydrogen donating ability, inhibition of lipid peroxidation, and inhibition of LDL oxidation. The most suitable conditions for the extraction of phenolic compounds from EKN were to use 60% ethanol by 3 times, and the yield of extract (dry basis) was 22%. In the extraction efficiency of phenolic compounds, 60% ethanol as extracting solvent was superior to water. Sixty% ethanol extract of EKN was found to have an ability of hydrogen donating to DPPH. MDA determination showed the 95% inhibitory effect against linoleic acid oxidation by the addition of 700 ppm EKN extract. Also, about 70% of LDL oxidation was inhibited by the addition of 500 ppm.

• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.3-11
• /
• 2007

It is to review the current status of magnesium smelting. Raw materials for magnesium source, worldwide production and producers of metallic magnesium, Korean magnesium markets and some important extraction technologies were reviewed. The magnesium extraction technologies were described according to the two major reduction methods: the fused salt electrolysis and the thermal reduction method. Also, the research on the extraction of magnesium from magnesite which has been being carried out at KIGAM was briefly introduced with discussing the related topics on the recycling of the chlorine and the hydrogen chloride gas used in the process.

• ALGAE
• /
• v.19 no.1
• /
• pp.59-68
• /
• 2004

Hizikia fusiformis hydroysates by five carbohydrases (Viscozyme, Celluclast, Termamyl and Ultraflo) and five proteases (Protamex, Kojizyme, Neutrase, Flavourzyme and Alcalase) were investigated for their extraction efficacy (yield and total total polyphenolic content) and antioxidative activity (DPPH radical and hydrogen peroxide scavenging activity). Termamyl and Ultraflo of the carbohydrases and Flavourzyme and Alcalase of proteases were selected by their high eficacy of extraction and antioxidative activity. Selected enzymes were used to investigate the optimum enzymatic reaction time and dosage (enzyme/substrate ratio) suitable for hydorolysis. Optimum reaction time for the enzymatic hydrolysis was 3 days and optimum dosage of hydrolysis was observed as 5%. Simultaneously, Ultraflo of the two carbohydrases and Alcalse of the two proteases were selected as the most effective enzymes. Combination of Ultraflo and Alcalase under optimum hydrolysis conditions could intensify the extraction efficacy of antioxidative materials form H. fusiformis. The hydrolysate obtained by combining the enzymes was separated into four different molecular weight fractions (<1kD, 1-10 kD, 10-30 kD and >30 kD) and recorded the polyphenolic content distribution and respective antioxidative ability. The fraction <1kD was identified as less effective and those fractions > 1kD indicated comparatively higher antioxidative activities related to their polyphenolic content.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.2
• /
• pp.36-45
• /
• 1997

Newly bleaching sequence using oxygen, ozone and hydrogen peroxide has introduced to avoid pollution hazards from chlorinated organic compounds, because chlorine dioxide substitution bleaching was produced a little chlorinated organic substance. Oxygen-type chemicals replaced for chlorine has attracted much research attention. Bleachability of ozone was improved at low temperature and high pulp consistency. In third bleaching followed OZ bleaching, addition of O2 and NaBH4 in alkali extraction was effective than only alkali extraction. Bleachability of pulps in ozone bleaching(Z) was improved at higher consistency and lower temperature The addition O2 and NaBH4 in alkali extraction after OZ bleaching sequence improved brightness, when compared to those obtained by only alkaline extraction. Pulps bleached by ECF bleaching sequences such as OZEoD and OZEopD was obtained by 90% ISO brightness. The brightness of pulp bleached by TCF sequences with the ozone dosage of 1.6% was approached to target brightness (88~90%ISO). Pulps bleached Z stage combined bleaching sequence was reduced the viscosity to a little greater extent. However, physical properties of pulps was not great different compared to those bleached by conventional bleaching sequences. A pollution index of bleaching effluente by ozone combined bleaching sequences was lower than by conventional bleaching sequence, but somewhat higher than multistage bleaching sequences combined C/D stage.