• YAKHAK HOEJI
• /
• v.37 no.2
• /
• pp.119-123
• /
• 1993

A spectrophotomertic method is proposed for the determination of antihistamines. The method is based on solvent extraction of the ion pair formed between antihistamines and colored picric acid into chloroform. The binding state of antihistamines-picric acid complexes were presumed by IR and $^{1}$H-NMR spectra as intermolecular hydrogen bonding. This method was applicable to the determination of antihistamines in the pharamaceutical preparations.

• Analytical Science and Technology
• /
• v.16 no.4
• /
• pp.261-268
• /
• 2003

To investigate the matrix effect of sample for hydrogen analysis by inert gas fusion-thermal conductivity detection, calibration factor for the hydrogen analyser of the inert gas fusion-thermal conductivity detection method was measured with hydrogen standard materials in Ti, Zr-2.5Nb and by hydrogen gas dosing method. Also the hydrogen extraction efficiency for the different sample matrix, Ti and Zr-2.5Nb, was evaluated without adding tin flux. The calibration factor of the hydrogen analyser which was calibrated by hydrogen standard material in Zr-2.5Nb and Ti was 2~3% and 14% higher than that by hydrogen gas dosing method, respectively. Based on the results of calibration factor measurement, it could be concluded that the hydrogen extraction efficiency of the Ti matrix sample will be 12% lower than that of the Zr-2.5Nb. And according to the experimental results of hydrogen recovery test by no tin flux, the hydrogen recovery percentage of the Ti and Zr-2.5Nb matrix sample was about 70% but the recovery rate of Ti matrix sample was slightly lower than that of Zr-2.5Nb.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.1
• /
• pp.44-49
• /
• 2013

Hydrogen penetration into a metal leads to damages and mechanical degradations and its content measurement is of importance. For a precise measurement, a sample preparation procedure must be optimized through a series of studies on sample washing and drying. In this study, two-step washing with organic solvents and thermal soaking in inert gas were tried with a rod-shaped, API X65 steel sample. The samples were machined from a steel plate and then washed in acetone and etyl-alcohol for 5 minute each and dried with compressed air. After then, the samples were thermally soaked in a home-made nitrogen gas chamber during 10 minute at different heat gun temperatures from 100 to $400^{\circ}C$ and corresponding temperature range in the soaking chamber was from 77 to $266^{\circ}C$ according to the temperature calibration. Hydrogen residue in the samples was measured with a hot extraction system after each soaking step; hydrogen residue of $0.70{\pm}0.12$ wppm after the thermal soaking at $77^{\circ}C$ decayed with increase of the soaking temperature. By adopting the heat transfer model, decay behavior of the hydrogen residue was fitted into an exponential decay function of the soaking temperature. Saturated value or lower bound of the hydrogen residue was 0.36 wppm and chamber temperature required to lower the hydrogen residue about 95% of the lower bound was $360^{\circ}C$. Furthermore, a thermal desorption spectroscopy was done for the fully soaked samples at $360^{\circ}C$. Weak hydrogen peak was observed for whole temperature range and it means that hydrogen-related contaminants of the sample surface are steadily removed by heating. In addition, a broad peak found around $400^{\circ}C$ means that parts of the hydrogen residue are irreversibly trapped in the steel microstructure.

• Journal of the Korean Society of Safety
• /
• v.8 no.2
• /
• pp.44-50
• /
• 1993

The objective of this study was to investigate the extraction of chromium(Vl) ion in waste water through the liquid surfactant membrane with open-type Perforated Reciprocating-Plate Column. Extraction experiments were conducted to measure the effect of flow characteristics of continuous and dispersed phase and stroke velocity, sodium hydroxide concentraction in internal aqueous phase, sulfuric acid concentraction in outer phase, and residence time distribution and measured extraction velocity. The result of experiments showed that extraction velocity of chromium ion was maximum when stroke velocity was 180 1/min and dispersion phase velocity was 30m11min, continuous phase velocity was 20m1/min. Extraction velocity of chromium ion increased with increasing difference of hydrogen ion concentraction of dispersion and continuous phase and column stage decreased.

• New & Renewable Energy
• /
• v.10 no.1
• /
• pp.30-40
• /
• 2014

The main object of this study was to offer information about incoming waste in landfill and to evaluate biochemical methane and hydrogen sulfide potentials of landfill wastes. We examined brick, soil, mixed waste (C&D waste and MSW) samples for the study. The leaching experiments showed that BOD, COD and sulfate were determined in the range of 0~18,816 mg/kg, 85~21,100 mg/kg and 160~1,205 mg/kg, respectively in 6hr extraction test. An accumulated extraction tests for 140day were determined BOD 226~197,219 mg/kg, COD 436~242,588 mg/kg and Sulfate 1,090~25,140 mg/kg. Also, BMP (biochemical methane potential) tests were carried out to examine methane and hydrogen sulfide yields for the 3 different wastes. As a result, methane yield was determined to 262.68 mL $CH_4/g$ VS of MSW and 0~17.75 mL $CH_4/g$ VS in brick, soil and C&D waste. Higher hydrogen sulfide yield was observed to 0.079mL $H_2S/g$ VS in C&D waste. This result indicate that brick and soil could be sources of sulfate, and higher production of hydrogen sulfide could be odor problem and inhibitor of methane production.

• Food Science and Preservation
• /
• v.9 no.1
• /
• pp.97-101
• /
• 2002

Antimicrobial and antioxidative activities of various solvent extracts from different parts of the loquat were investigated to process it as the functional food. The extraction yield showed higher in butanol fraction of 4.95% in peel and 4.42% in seed than others, but water fraction showed high extraction yield of 3.89% in leafs 23.6% in the seedless fruit and 21.1% in fresh, In the antimicrobial activity test, ethyl acetate fraction that leaf and fruit excluded seed inhibited higher 19, 15 mm and 16, 15 m in clear zone far Staphylococcus aureus and Escherichia coli in each. Ethyl acetate fraction that extracted from a series of polar and nonpolar solvent fractionation of methanol extracts showed better results in the hydrogen donating activity of 82% in leaf, 74% in seedless fruit, 68% in seed, 52% in peel and 30% in fresh.

• Food Science and Biotechnology
• /
• v.27 no.6
• /
• pp.1761-1769
• /
• 2018

Enzyme-assisted extraction is a cost-effective, safe, and efficient method to obtain bioactives from plant materials. During this study, 10 different marine algae from Sri Lanka were individually extracted by using five commercial food-grade carbohydrases. The enzymatic and water extracts of the seaweeds were analyzed for their antioxidant and anti-inflammatory activities. The highest DPPH, hydrogen peroxide ($H_2O_2$) and intracellular $H_2O_2$ scavenging abilities were observed from the Celluclast extract of Sargassum polycystum (CSp). CSp exerted protective effects against oxidative stress-induced cell death in hydrogen peroxide-induced Chang cells and in model zebrafish. The Celluclast extract of Chnoospora minima (CCm) showed the strongest anti-inflammatory activity against lipopolysaccharide (LPS)-induced NO production in RAW 264.7 macrophages ($IC_{50}=44.47{\mu}g/mL$) and in model zebrafish. CCm inhibited the levels of iNOS, COX-2, $PGE_2$, and TNF-${\alpha}$ in LPS stimulated RAW 264.7 macrophages. Hence, CSp and CCm could be utilized in developing functional ingredients for foods, and cosmeceuticals.

• Journal of the Korean Society of Safety
• /
• v.2 no.1
• /
• pp.17-29
• /
• 1987

The extraction mechanism of Zinc from aqueous solution with D2EHPA (Di-2-Ethylhexyl Phosphoric Acid) dissolved in Kerosene was studied by the single drop method. The effect of the concentrations of reactant species on the extraction rate, Zinc and hydrogen ion in the continuous phase and D2EHPA in the dispersed, was studied for the drop rise period by the experiment. Then a theoretical analysis on the basis of Handlos-Baron modle was carried out. It becomes clear that the extraction rate was controlled by the neutral complex forming reaction at the drop surface from both analysises. From effect of the concentrations of species on the reaction rate, the extraction rate at the drop surface is considered to be as follows. $${\gamma}_{pn}=9.42{\times}10^{-7}\;\frac{[Zn^{2+}][(HR)_2]^{3/2}}{[H^+]^{3/2}}$$

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.497-500
• /
• 2001

The purpose of this study was to investigate the extraction method and antioxidative activities of phenolic compounds from Korean red tail ginseng. Antioxidative activities of red tail ginseng were evaluated with its ability to donate hydrogen to DPPH, and to inhibit the oxidation of linoleic acid and LDL induced by $H_2O_2$ and $FeCl_2$, respectivly by measuring the MDA formation. Total phenolic compounds expressed as % caffeic acid were 0.80%, 0.12%, 0.06%, 0.03%, 0.01% when red tail ginseng was consecutively extracted with 60% ethanol for 5 times, most of the phenolic compounds was recovered in the extract obtained after 3 times of extraction. The extraction efficacy of 60% ethanol was superior to that of water in extraction phenolic compounds, and the efficacy did not change after evaporating the extract followed by dissolving with water. 60% ethanol extract of red tail ginseng had weak ability to donate hydrogen to DPPH. MDA determination showed the antioxidative effect with inhibition ratio of 72.23% on linoleic acid oxidation by addition of red tail ginseng extract at the concentration of 1,500 ppm. 22.52% of LDL oxidation was inhibited by addition of 250 ppm.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.4
• /
• pp.50-56
• /
• 2003

This research was performed to select an appropriate agent to extract preservative components from CCA-treated wood, and then to evaluate the effect of reagent concentration, extracting temperature, and extracting time on the removal of chrome, copper, and arsenic from treated wood. Hydrogen peroxide was selected as the best extracting agent when considered extraction yield as well as use and environmental safety. Its extraction yield was dependent on extracting variables (temperature, concentration, and time), and a highly significant interaction existed among variables. It should be possible to optimize extraction by manipulating these extracting variables. The results may suggest that the required temperature conditions for the reasonable removal of CCA components are at least above 40℃ because extracting time is too long at low temperature (20℃). Reagent concentrations for extracting at above 40℃ should be decided by considering the extracting time.