• 대한화학회지
• /
• 제59권6호
• /
• pp.493-498
• /
• 2015

The reductive amination of cyclohexanone with ammonia over Cu-Cr-a/γ-Al₂O₃ was investigated. It was found that a proper solvent with high solubility of ammonia and 4Å molecular sieves for the elimination of generated water contributed to the formation of cyclohexylamine in the premixing process. In addition, the addition of ammonia in the fixedbed reactor could obviously improve the conversion of cyclohexanone to cyclohexylamine. Finally, reaction conditions including reaction temperature, hydrogen pressure and charging rate of the premix were optimized. Under the optimized conditions, cyclohexylamine was obtained in 83.06% yield.

• 한국태양에너지학회 논문집
• /
• 제36권5호
• /
• pp.19-30
• /
• 2016

In this study, realize voltage regulation $220Vac{\pm}10%$ or less, frequency fluctuation $60Hz{\pm}1%$ or less over the independent operation and grid-connected operation technologies for power stabilization relates to the ESS designed and manufactured in conjunction with solar installations and solar to compensate the output reduction due to the polarization of the solar module through the polarization prevention technology for preventing the optical module efficiency is lowered, in conjunction with the BMS inverter efficiency was more than 92%, more than 90% of the charging efficiency to the target. This study was designed in conjunction with the ESS solar power plants, grid-connected operation and independent operation, Peak-Cut, it can stabilize the grid via the Peak-Shifting operation

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.120-121
• /
• 2007

Nano-floating gate memory (NFGM) devices were fabricated by using the low temperature poly-Si thin films crystallized by ELA and the $In_2O_3$ nano-particles embedded in polyimide layers as charge storage. Memory effect due to the charging effects of $In_2O_3$ nano-particles in polyimide layer was observed from the TFT NFGM. The post-annealing in 3% diluted hydrogen $(H_2/N_2)$ ambient improved the retention characteristics of $In_2O_3$ nano-particles embedded poly-Si TFT NFGM by reducing the interfacial states as well as grain boundary trapping states.

• 한국기후변화학회지
• /
• 제8권1호
• /
• pp.41-50
• /
• 2017

As serious consequences of climate change became indisputable, vehicles based on fossil fuel has to be shifted toward more sustainable way to drastically reduce carbon emissions. Eco-friendly vehicles contribute mitigating climate change through reducing the greenhouse gas emissions. The goal of this research is to find ways to promote the eco-friendly vehicle industry in Korea. In order to achieve this goal, surveys are collected from the professionals of eco-friendly vehicle industry, and analyzed through Delphi method. Results show that the first thing is to promote the eco-friendly vehicle market by introducing the economic incentives. The second thing is to allow more emission credit for eco-friendly vehicle manufacturers. The third thing is to build more concrete infrastructure for the eco-friendly vehicles. The increase of the number of the electric or hydrogen charging system would be one of the good examples of the infrastructure. The fourth thing is that the government supports the research & development of eco-friendly vehicles. The fifth is to regulate that the government agency is mandatory to use the eco-friendly vehicles. The sixth thing is to provide the low-carbon certification for eco-friendly vehicles. The seventh thing is to support advertising the eco-friendly vehicles. The results from this research can be used as a guideline to make policies to stimulate the eco-friendly vehicle industry in Korea.

• 한국수소및신에너지학회논문집
• /
• 제26권2호
• /
• pp.170-178
• /
• 2015

In this study, we carry out a study on how to improve performance of vanadium redox flow battery (VRFB) through promoting reaction rate of rate determining vanadium reaction ($[VO]^{2+}/[VO_2]^+$). In order to do that, three different carbons like Vulcan (XC-72), CMK3 and MSU-F-C are adopted as the catalysts, while their catalytic activity and reaction reversibility are evaluated using half-cell tests. Their topological images are also measured by TEM. For estimation of the VRFB performance, multiple charge-discharge curves of VRFBs including the catalysts are measured by single cell tests. As a result of that, MSU-F-C shows relatively excellent catalytic activity and reaction reversibility as well as large surface area compared to those of Vulcan (XC-72) and CMK3. Also, in terms of the performance of VRFBs including the catalysts, VRFB including MSU-F-C indicates (i) low charging/discharging overpotentials and low internal resistance, (ii) high charge/discharge capacities and (iii) high energy efficiency. These VRFB performance data are well agreed with results on catalytic activity and reaction reversibility. The reason that MSU-F-C induces superior VRFB performances is attributed to (i) its large surface area and (ii) its hydrophilic surface functional groups that mainly consist of hydroxyl bonds that are supposed to play active surface site role for facilitaing $[VO]^{2+}/[VO_2]^+$ redox reaction. Based on the above results, it is found that adoption of MSU-F-C as catalyst for VRFB results in improvement in VRFB performance by promoting the languid $[VO]^{2+}/[VO_2]^+$ redox reaction.

• Korean Chemical Engineering Research
• /
• 제57권2호
• /
• pp.239-243
• /
• 2019

본 연구에서는 Anthraquinone-2,7-disulfonic acid (2,7-AQDS)와 Tiron을 수계 레독스 흐름 전지 음극 및 양극 활물질로 사용하며 기존의 황산 전해질 대신 중성인 염화암모늄 ($NH_4Cl$)을 전해질로 도입하였다. 이렇게 전해질을 변경함으로써, 황산 전해질의 낮은 셀 전압(0.76 V)을 1.01 V까지 향상시킬수 있다. 성능 최적화를 위해 염화암모늄 전해질에 0.1 M로 활물질 농도를 맞춰 컷-오프 전압에 변화를 주며 완전지셀 성능을 평가하였다. 0.2~1.6 V 구간의 컷-오프 전압으로 $40mA/cm^2$ 하에서 20 사이클 동안 완전지셀을 테스트한 결과, 충전 동안 수소가 발생하였다. 이에 컷-오프 전압 조절로 충전 전압을 낮춰서 수소 발생을 제한하고자 0.2~1.2 V 구간으로 $40mA/cm^2$ 하에서 완전지셀 테스트를 진행하였다. 수소 발생은 없었으며, 전류 효율 99%, 방전 용량 3.3 Ah/L의 성능을 보였다.

• 한국재료학회지
• /
• 제30권8호
• /
• pp.426-434
• /
• 2020

The performance characteristics of a lead acid battery are investigated with the content of Sodium Perborate Tetrahydrate (SPT, NaBO₃·4H₂O) in a positive plate active material. SPT, which reacts with water to form hydrogen peroxide, is applied as an additive in the positive plate active material to increase adhesion between the substrate (positive plate) and the active material; this phenomenon is caused by a chemical reaction on the surface of substrate. A positive plate with the increasing content of SPT is prepared to compare its properties. It is confirmed that the oxide layer increases at the interface between the substrate and the active material with increasing content of SPT; this is proven to be an oxide layer through EDS analysis. Battery performance is confirmed: when SPT content is 2.0 wt%, the charging acceptance and high rate discharge properties are improved. In addition, the lifetime performance according to the Standard of Battery Association of Japan (SBA) S0101 test is improved with increasing content of SPT.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.176.2-176.2
• /
• 2013

Property of optical diagnostics for pulse-discharged plasma in liquid and its biological applications to proteins are investigated by making use of high voltage Marx generator. The Marx generator has been consisted of 5 stages, where each charging capacitor is 0.5 ${\mu}F$, to generate a high voltage pulse with rising time of $1{\mu}s$. We have applied an input voltage of 6 kV to the each capacitor of 0.5 ${\mu}F$. High voltage pulsed plasma has been generated inside a polycarbonate tube by a single-shot operation, where the breakdown voltage is measured to be 7 kV, current of 1.2 kA, and pulse width of ~ 1 ${\mu}s$ between the two electrodes of anode-cathode whose material is made of tungsten pin, which are immersed into the liquids. We have investigated the emitted hydrogen lines for optical diagnostics of high voltage pulsed plasma. The emission line of 656.3 nm from $H-{\alpha}$ and 486.1 nm from $H-{\beta}$ have been measured by a monochromator. If we assumed that the focused plasma regions satisfy the local thermodynamic equilibrium conditions, the electron temperature and density of the high voltage pulsed plasma in liquid could be obtained by the Stark broadening of optical emission spectroscopy. For the investigation of the influence of pulsed plasma on biological proteins, we have exposed it onto the proteins such as hemoglobin and myoglobin. The structural changes in these proteins and their analysis have also been obtained by circular dichroism (CD) and ultraviolet (UV) visible spectroscopy.

• 한국재료학회지
• /
• 제32권3호
• /
• pp.146-152
• /
• 2022

One disadvantage of deep cycle flooded lead-acid batteries is increasing water loss caused by use of (+) Pb-Sb / (-) Pb-Sb alloy grid. Water loss is generated by the emission of hydrogen gas from the (-) electrode during battery charging. In this paper, we maintain cycle life aspect through the development of hybrid flooded lead-acid batteries to which a (+) Pb-Sb / (-) Pb-Ca grid is applied and deal with the improvement of water loss. The amount of water loss compared to that of the (-) Pb-Sb grid decreased when Ca was added to the (-) Pb grid. For the (-) Pb-Ca grid, it was confirmed that the time to reach 0.0 V, at which water decomposition occurs, was increased compared to that of the (-) Pb-Sb grid at the NPV (Negative Potential Voltage). In the cycle life test conducted with the BCI (Battery Council International) standard, compared to the (+) Pb-Ca grid, the (+) Pb-Sb grid increased the life cycle of the batteries and the (+) Pb-Ca grid showed an early end of life due to PbO corrosion layer generation, as determined through SEM / EDS and Tear Down analysis. In conclusion, by addition of Sb to (+) Pb grid and Ca to (-) Pb grid, we developed a hybrid flooded lead-acid battery that meets user requirements to improve water loss characteristics and preserve cycle life characteristics.

• 한국건축시공학회지
• /
• 제23권6호
• /
• pp.715-726
• /
• 2023

본 연구에서는 수소 충전소와 같은 폭발 가능성을 가진 구조물들의 안전 설계 방안으로 방호패널이 희생 부재로 설치되어 구조물의 직접적인 피해를 최소화하고 회복 탄력성을 가질 수 있어야 한다고 제시하였다. 이를 위해 비상체의 고속 충돌 상황에서 방호 패널이 구조물과 밀착 또는 이격 설치되었을 때 구조물이 받는 영향을 정량적으로 평가하는데 실험의 초점을 맞추고 있다. 실험 설계는 우수한 재현성을 위해 기존에 주로 사용한 콘크리트 구조부재 대신 강판을 사용하며, 철판 배면의 변형 차이를 통해 구조부재의 충격을 비교·분석하였다. 또한, 방호 부재의 이격재로 사용한 탄성체의 물성 변화와 방호부재 및 탄성체에 따른 충격파 전달 시간의 차이가 구조부재에 미치는 영향을 조사하였다.