• 열처리공학회지
• /
• 제18권4호
• /
• pp.223-228
• /
• 2005

Tube hydroforming provides a number of advantages over conventional stamping process, including fewer secondary operation, weight reduction, assembly simplification, adaptability to forming of complex structural components and improved structural strength and stiffness. It can produce wide range of products such as subframe, engine cradle, and exhaust manifold. In this study, the effect of the heat treatment conditions such as post seam annealing (PSA) and bright annealing (BA) on the ovality and hydro-formability of steel tubes has been investigated. Hydroformabilities have been estimated by the bulging heights obtained at various processing parameters such as internal pressure, axial feeding and heat treatment conditions. The ovality and forming height are strongly influenced by material properties after heat treatments.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.348-348
• /
• 2005

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.339-339
• /
• 2005

• 대한기계학회논문집A
• /
• 제34권7호
• /
• pp.905-910
• /
• 2010

일체형 배기다기관은 하이드로 포밍 대량 생산이 가능한 부품으로 국내, 국제적인 환경문제에 따른 배출 규제와 매우 밀접한 관계에 있기 때문에, 국내 완성차 업체에서 큰 관심을 가지고 있다. 일반적인 주조부품과 비교해서 관형 배기다기관은 용접공정 감소에 따른 단순화된 제작 공정 뿐만아니라, 엔진 시동시 가스 분해능이 우수한 특징을 가지고 있다. 본 연구는 부품, 공정, 금형 설계를 포함하는 배기다기관을 개발하는데 목적이 있다. 배기 시스템의 성능은 유동해석, 열전달, 열응력, 내구해석 시뮬레이션을 통해 평가하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1105-1106
• /
• 2010

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.11-21
• /
• 1992

Modern manufacturing process requires machine intelligence to meet the demands for high technology products as well as intelligence-based operating skills to lessen human worker's intervene. To meet this trend there has been wide spread interest in applying artificial neural network(ANN) to the areas of manufacturing process monitoring and control. This paper addresses application problems in such processes as welding, assembly, hydroforming process and inspection of solder joints.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.29-29
• /
• 2005

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2002년도 추계학술발표대회 논문개요집
• /
• pp.41-44
• /
• 2002

• 열처리공학회지
• /
• 제20권4호
• /
• pp.181-186
• /
• 2007

Effect of heat treatment conditions on formability and property of warm hydroformed parts for Al 6061 extruded tubes was investigated in this study. For the investigation, as-extruded, fully annealed and T6-treated Al 6061 seamless tubes were prepared. To evaluate the warm hydroformability, uni-axial tensile test and free bulge test were performed at various pre- and post-heat treatment conditions. And the tensile test specimens were obtained from hexagonal prototype hydroformed parts at $250^{\circ}C$. As a result, hydroformability of fully annealed tube is 25% higher than that of extruded tube. The tensile strength and strain of hydroformed part reach to 330 MPa and 12%, respectively, when the part was T6 treated after warm hydroforming. However, the hydroformability of T6 pre-treated tube is relatively low due to the decreased elongation, 8%.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.1010-1015
• /
• 2008

In this study, the characteristics of aluminum tube hydroformed products at different extrusion type and heat treatment conditions were investigated. For the investigation, as-extruded, full annealed and T6-treated Al 6061 tubes at different extrusion type were prepared. To evaluate the hydroformability, free bulge test was performed at room temperature to $300^{\circ}C$. Also mechanical properties of hydroformed products at various pre- and post-heat treatments were estimated by hexagonal prototype hydroforming test at $250^{\circ}C$. And the tensile test specimens were obtained from hexagonal prototype hydroformed tube. As a results, hydroformability of full annealed tube is $5{\sim}8%$ higher than that of extruded and T6-treated tube. The tensile strength and elongation of T6-post heat treated indirect extrusion tube were more than 330MPa and 12%, respectively. However, T6 pre treated hydroformed product represents high strength, 330MPa and low elongation, 8%. Therefore, Hydroformability of Al6061 tube showed similar value for both extrusion types. However flow stress of direct tube showed $20{\sim}50MPa$ lower value than indirect tube.