• Journal of Advanced Marine Engineering and Technology
• /
• 제39권9호
• /
• pp.903-910
• /
• 2015

본 연구의 목적은 유탄성 효과를 고려한 완전통계 피로해석 프로그램을 구축하기 위한 기초 연구로 강체 선체운동을 바탕으로 한 완전통계 피로해석 프로그램을 구축하는 것이다. 프로그램의 신뢰성을 확보하기 위해 두 가지 선종에 대해 선급 피로해석 결과와 비교하였고, 결과가 일치함을 알 수 있었다. 향후 유탄성 선체운동 결과를 반영하고 광대역 피로손상 모델을 도입하면 유탄성 효과를 고려한 완전통계 피로해석 프로그램을 개발할 수 있을 것으로 사료된다.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.312-326
• /
• 2012

This paper considers a fully coupled 3D BEM-FEM analysis for the ship structural hydroelasticity problem in waves. Fluid flows and structural responses are analyzed by using a 3D Rankine panel method and a 3D finite element method, respectively. The two methods are fully coupled in the time domain using a fixed-point iteration scheme, and a relaxation scheme is applied for improve convergence. In order to validate the developed method, numerical tests are carried out for a barge model. The computed natural frequency, motion responses, and time histories of stress are compared with the results of the beam-based hydroelasticity program, WISH-FLEX, which was thoroughly validated in previous studies. This study extends to a real-ship application, particularly the springing analysis for a 6500 TEU containership. Based on this study, it is found that the present method provides reliable solutions to the ship hydroelasticity problems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권2호
• /
• pp.170-179
• /
• 2018

This paper introduces a new method to study the hydroelastic behavior of hinged Very Large Floating Structures (VLFSs). A hinged two-module structure is used to confirm the present approach. For each module, the hydroelasticity theory proposed by Lu et al. (2016) is adopted to consider the coupled effects of wave dynamics and structural deformation. The continuous condition at the connection position between two adjacent modules is also satisfied. Then the hydroelastic motion equation can be established and numerically solved to obtain the vertical displacement, force and bending moment of the hinged structure. The results calculated by the present new method are compared with those obtained using three-dimensional hydroelasticity theory (Fu et al., 2007), which shows rather good agreement.

• 대한조선학회논문집
• /
• 제46권3호
• /
• pp.232-248
• /
• 2009

Numerical methodology to solve ship springing problem, which is basically fluid-structure interaction problem, was explored in this study. Solution of this hydroelasticity problem was sought by coupling higher order B-spline Rankine panel method and finite element method in time domain, each of which is introduced for fluid and structure domain respectively. Even though varieties of different combinations in terms of numerical scheme are possible and have been tried by many researchers to solve the problem, no systematic study regarding the characteristics of each scheme has been done so far. Here, extensive case studies have been done on the numerical schemes especially focusing on the iteration method, FE analysis of beam-like structure, handling of forward speed problem and so on. Two different iteration scheme, Newton style one and fixed point iteration, were tried in this study and results were compared between the two. For the solution of the FE-based equation of motion, direct integration and modal superposition method were compared with each other from the viewpoint of its efficiency and accuracy. Finally, calculation of second derivative of basis potential, which is difficult to obtain with accuracy within grid-based method like BEM was discussed.

• 한국해양공학회지
• /
• 제10권3호
• /
• pp.3-13
• /
• 1996

An extensive research programme has been aimed at the effct of ship weight distribution on the ship responses applying ship hydroelasticity theory. In the previous works, consistent tendencies of the still-water and the wave bending moments. respectively, were found as the weight distribution was varied systematically. The paper is therefore concerned mainly with any correlation between still-water and wave bending moments with the variations of weight distribution. Although these bending moments share different features with each other, such a comparison of tendencies was plausible and informative. These and other matters for the future are discussed.

• 한국해양공학회지
• /
• 제31권1호
• /
• pp.22-27
• /
• 2017

This paper presents the results of an experimental study on the wedge slamming impact problem, including the fluid-structure interaction. A free drop test was performed to estimate the hydroelasticity. Three wedges were fabricated of 5 mm thick steel plate. The deadrise angles were $15^{\circ}$, $20^{\circ}$, and $25^{\circ}$. Plate thicknesses of 2 mm and 3 mm were used to determine the effect of the structural rigidity. The drop heights were 25 cm, 50 cm, 75 cm, and 100 cm. The pressure on a rigid part of the wedge and strain of the elastic plate were measured at four different locations. The pressure was compared using the Wagner theory and generalized Wagner theory.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1041-1063
• /
• 2014

Some results on the hydroelasticity of ultra large container ships related to the beam structural model and restoring stiffness achieved within EU FP7 Project TULCS are summarized. An advanced thin-walled girder theory based on the modified Timoshenko beam theory for flexural vibrations with analogical extension to the torsional problem, is used for formulation of the beam finite element for analysis of coupled horizontal and torsional ship hull vibrations. Special attention is paid to the contribution of transverse bulkheads to the open hull stiffness, as well as to the reduced stiffness of the relatively short engine room structure. In addition two definitions of the restoring stiffness are considered: consistent one, which includes hydrostatic and gravity properties, and unified one with geometric stiffness as structural contribution via calm water stress field. Both formulations are worked out by employing the finite element concept. Complete hydroelastic response of a ULCS is performed by coupling 1D structural model and 3D hydrodynamic model as well as for 3D structural and 3D hydrodynamic model. Also, fatigue of structural elements exposed to high stress concentration is considered.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.55-70
• /
• 1992

트림변화에 의해서 발생하는 선체 구조응답을 고찰, 계산 결과를 요약하였다. 본 고찰로 부터 같은 크기의 선수, 선미 트림상태일지라도 많은 차이를 보였다. 이에는 중량분포의 효과가 특히 크게 작용함을 밝히었다.

• 한국해양공학회지
• /
• 제6권2호
• /
• pp.151-171
• /
• 1992

선체응답의 변화를 고찰, 계산 결과를 요약하였다. 이에 대한 계산은 유체 동력학적 해석을 이용하였으며 본 이론의 합리성을 아울러 지적하였다. 선체의 유연성을 증가시킴으로서 추격선두 굽힘 모멘트는 줄지만, 모멘컴 굽힘 모멘트는 일반적으로 증가함이 나타났다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1055-1060
• /
• 2001

Springing phenomena of ships is introduced with its concept, research history and approach methodology. Being a hydroelasticity problem, non-linear vibration and stochastic process, springing was formulated and modeled in vibration point of view separating hydrodynamic force into system properties and excitation force. Both RAO and response spectrum as well as wave spectrum were presented as a case study of springing analysis for a flexible vessel with wide breadth. The effect of advance speed, heading angle and loading condition were investigated as parametric study. The results and observations showed availability of analysis for the prediction of the ship springing behavior.