• 자원리싸이클링
• /
• 제12권3호
• /
• pp.38-45
• /
• 2003

화학평형, 물질수지 및 전기적 중성식을 고려하고 Bromley식으로 용질들의 활동도계수를 구하여 염산용액에서 염화니켈의 이온평형을 해석하였다. 본 연구에서 고려한 조성범위에서 니켈을 함유한 화학종의 대부분은 $Ni^{2+}$ 와 $NiCl^{+}$ 로 존재하고 니켈수산화물의 농도분율은 매우 낮으나, 용액의 pH가 증가함에 따라 $Ni_4$ $(OH)_{4}^{4+}$ 의 농도분율은 급격히 증가하였다. $NiCl_2$ $-HCl-NaOH-H_2$O 계에 대해 전해질의 농도를 변화시키며 $25^{\circ}C$에서 측정한 pH값과 계산값은 이온강도 9.4m정도의 범위까지 서로 잘 일치하였다.

• Corrosion Science and Technology
• /
• 제21권2호
• /
• pp.77-88
• /
• 2022

Schiff base quinazoline derivative viz., 3-((2-hydroxy-3-methoxybenzylidene)amino)-2-methylquinazolin-4(3H)-one (SB-Q), was synthesized in this study. Its corrosion protection impact on mild steel (MS) in 1 M hydrochloric acid solution was examined by performing weight loss measurements. The protective efficacy of SB-Q on MS in 1 M HCl was investigated based on its concentrations, immersion period, and immersion temperature. SB-Q was found to be an efficient inhibitor for the corrosion of MS. Its inhibition efficiency was improved by increasing the concentration of SB-Q to an optimal concentration of 500 ppm. Its inhibition efficacy was 96.3% at 303K. Experimental findings revealed that its inhibition efficiency was increased with increasing immersion time, but decreased with an increase in temperature. The adsorption of SB-Q molecules was followed the Langmuir adsorption isotherm model. The adsorption of the examined inhibitor molecules on the surface of mild steel was studied by density functional theory (DFT). DFT investigation confirmed weight loss findings.

• Corrosion Science and Technology
• /
• 제21권1호
• /
• pp.9-20
• /
• 2022

The aim of this paper is to study corrosion inhibition of Aluminum with Capparis decidua extract. The study was performed in a 1.0 M solution of hydrochloric acid (HCl) and was monitored both by measuring mass loss and by using electrochemical and polarization methods. A scanning electron microscopy (SEM) technique was also applied for surface morphology analysis. The results revealed high inhibition efficiency of Capparis decidua extract. Our data also determined that efficiency is governed by temperature and concentration of extract. Optimum (88.2%) inhibitor efficiency was found with maximum extract concentration at 45 o C. The results also showed a slight diminution of aluminum dissolution when the temperature is low. Based on the Langmuir adsorption model, Capparis decidua adsorption on the aluminum surface shows a high regression coefficient value. From the results, the activation enthalpy (∆H#) and activation entropy (∆S#) were estimated and discussed. In conclusion, the study clearly shows that Capparis decidua extract acted against aluminum corrosion in acidic media by forming a protective film on top of the aluminum surface.

• 공업화학
• /
• 제21권2호
• /
• pp.188-194
• /
• 2010

전해살균수는 수도물에 식염이나 염산 등의 전해보조제를 첨가시킨 수용액을 전기분해하여 유용한 기능을 갖게 한 수용액이다. 전해살균수는 살균을 목적으로 한 식품위생관리에 사용되는 것으로, 강산성전해수, 미산성전해수 및 차아염소산나트륨수로 나눌 수 있다. 본 연구에서는 살균효과를 지닌 전해살균수의 제조원리, 장단점 분석과 함께 연도별, 국가별, 출원인별, 기술종류별로 기술동향 특허분석을 하였다.

• 멤브레인
• /
• 제4권1호
• /
• pp.38-45
• /
• 1994

계면중합법에 의한 막 제조시 여러 제조변수의 영향을 평가하기 위한 실험을 행하여 다음과 같은 결과를 얻었다. 반응물인 MPD(m-phenylene diamine)농도가 증가할수록 배제율은 증가하나 투과유속은 감소하였다. MPD의 경우에 함침시간이 증가할수록 배제율은 증가하나 투과유속은 감소하였다. TMC(trimesoyl chloride)경우에는 함침시간이 증가할 때 투과유속은 감소한 반면 배제율은 증가한 이후 감소하였다. 열처리 온도가 상승함에 따라 투과유속은 증가하나 배제율은 증가한 이후 감소하였다. 첨가제인 NaOH는 중합시 발생하는 염산의 양이 적어 미량이 중화에 필요하였으며, 그 양이 증가할수록 배제율과 누과유속은 증가한 이후 감소하여\ulcorner. 후처리는 ethanol, isoprophlalcohol, $5~7^{\circ}C$의 물로 치환하여 배제율과 투과유속에서 상승을 가져왔으며, $5~7^{\circ}C$ 물의 경우에는 후처리 시간에 따라 극대값을 가짐을 알 수 있었다.

• 공업화학
• /
• 제31권1호
• /
• pp.103-107
• /
• 2020

본 연구는 대부분의 산업부산물에 다량 포함되어 있는 칼슘이온을 자원화하기 위한 것으로 칼슘이온의 추출 및 분리 조건 별 특성을 확인하였다. 칼슘 추출원으로 산화칼슘, 추출용제로 염산을 사용했으며, 추출용제의 농도에 따른 추출량 및 추출액의 pH 변화 특성을 분석하였다. 추출용제의 농도가 높아짐에 따라 추출량은 증가하는 반면 추출액의 pH는 일정하게 유지되는 경향을 나타내었다. 추출된 칼슘이온을 분리하기 위하여 산·염기성 용액 주입하였으며, 침전물 발생 여부와 침전물의 형태에 대하여 분석하였다. 산·염기성 물질 중 황산, 수산화나트륨 용액을 칼슘추출액에 주입하였을 때 침전물이 발생하였으며 각각 CaSO₄, Ca(OH)₂ 형태로 분리되는 것을 확인할 수 있었다.

• 대한화학회지
• /
• 제55권3호
• /
• pp.495-501
• /
• 2011

플라보노이드계 화합물인 HMPC (3-hydroxy-7-methoxy-2-phenylchromen-4-one의 부식억제성질, HMPC와 TBAB(n-tetrabutylammonium bromide) 간 상승효과, 염산 조건하 부드러운 강철의 흡착성질을 무게 감량, 변전위 편극, 전기화학 임피던스 분광기를 사용하여 연구하였다. 다양한 온도에서 무게 감량 측정 실험한 결과 부식 억제 효율은 억제제 농도가 증가함에 따라 증가하였고, 계의 온도가 증가함에 따라 감소하였다. 전기화학 실험 결과 부식 억제는 여러 혼합된 형태의 억제 방법에 의해 가능하였다. 금속 표면에 흡착된 억제 화합물 분자는 보호막을 형성하였다.

• 한국의류학회지
• /
• 제26권2호
• /
• pp.349-354
• /
• 2002

In order to decolorize the reactive dye wastewater, we investigated the dye-adsorption ability of chitin, which was natural polymer obtained from shrimp shell. Chitin particle(less than 250 ${\mu}{\textrm}{m}$n) was prepared from shrimp shells in the processes of decalcification in aqueous hydrochloric acid solution and deproteination in aqueous sodium hydroxide solution. The particle size of chitin was controlled to less than 250 ${\mu}{\textrm}{m}$. Three tripes of the reactive dyes-C.I. Reactive Red 120, C.I. Reactive red 241 and C.I. Reactive Black 5-were used. Dye adsorption ability of chitin was investigated by dipping the particle in the dyebaths of concentration of 0.0l%, 0.03% and 0.05% for various periods of time(1,3,5, 10,20,40,80,160minutes). The influence of addition of salt(Na$_2$SO$_4$) and alkali to the dyebaths on dye-absorption was also investigated. We obtained the following results fur the dye-absolution ability of chitin in the dyebaths of three types of reactive dyes. 1) The amount of dye uptake by chitin was increased by addition of salt to the dyebaths. 2) As the concentration of alkali became higher than 3g/I, the amount of dye uptake by chitin was increased. Chitin showed good dye-adsorption ability, when the alkali concentration was high. 3) Chitin showed equal dye uptake in the three types of dyebaths when the dye concentration was 0.0l%. Over 90% of dyestuffs was adsorbed from the dyebaths in ten minutes. When the dye concentration was higher, better adsorption ability was showed in a dye bath of Reactive black 5 than in the others. When the dye concentration was 0.03%, 90% of Reactive red 120 and Reactive red 241 was adsorbed in 40 minutes and the same of Reactive black 5 in 10 minutes. When the dye concentration was 0.05%, 9()% of Reactive red 120 was adsorbed in 80 minutes, and Reactive black 5 in to minutes.

• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.105-114
• /
• 2008

This study investigates the saturation level of surface dryness, quantity of adhesive mortar, and the alien substance content of recycled aggregates for concrete to develop an adequate quality testing method for understanding the properties of recycled aggregates, which differ greatly from preexisting aggregates. For tests that measure the saturation level of surface dryness, where detail methods are applied differently according to the tester, various testing methods from across world were compared and analyzed. This study revealed that when measuring the saturation level of surface dryness of a certain sample, aggregates must be supplemented immediately whenever the height of the sample becomes lower than the measuring mold, and allowing the tamper to free fall on the sample will provide the most accurate results. When measuring the quantity of adhesive mortar of recycled aggregates for concrete, an acid solution was used, and since the quantity of adhesive mortar increases as the particle sizes gets smaller, the sample for testing should represent the entire granularity. Sulfuric acid solution is adequate for immersion, and the concentration should be 20% for best results. According to the alien substance content measurement, which was examined by the naked eye, the error range caused by the difference in particle size was neglectable, and therefore the sample should be $2.5{\sim}5.0mm$ in size concerning the accuracy and measuring time. Also, for coarse recycled aggregates, the sample should amount to 1kg for measuring alien substance content by the naked eye, which proves that assortment by the naked eye is the most adequate method for measuring the alien substance content of a recycled aggregate.

• 분석과학
• /
• 제6권1호
• /
• pp.131-139
• /
• 1993

아연광 중 미량으로 존재하는 갈륨 및 인듐을 유도결합 플라스마 원자방출분광법(ICP-AES)으로 분석할 때 간섭하는 아연 및 다른 이온들과 특히 Fe(III) 이온으로부터 이들을 분리하는 방법에 대해 연구하였다. 갈륨과 인듐을 tributyl phosphate(TBP)로 용매추출하였는데 이때 영향을 주는 산농도, 다른 이온들의 간섭, 수용액상/유기상의 비율, TBP의 농도 및 탈거율 등에 대하여 조사하였다. 갈륨과 인듐이 함유되어 있는 아연광을 녹인 5N 염산용액에서 100% TBP로 추출하여 아연 및 기타 간섭이온들로부터 분리하였으며, 이때 철(III)이온은 hydroxylamine hydrochloride를 사용하여 Fe(II)로 환원시켜 coetraction되는 것을 방지하였다. 유기상으로부터 갈륨과 인듐의 탈거는 0.02N 염산용액으로 역추출하여 이루어졌으며 이 용액을 ICP-AES로 측정하여 이들을 정량하였다. 전체적으로 추출률이 95% 이상으로 정량적이었다.