• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.7
• /
• pp.801-809
• /
• 2007

Fly ash and blast furnace slag are an industrial by-product that can be alkali-activated to yield adhesive and cementitious materials, whose production is less energy-intensive and emits less $CO_2$ than ordinary Portland cement manufacture. A laboratory investigation was carried out to evaluate the effect of alkali-activating conditions on compressive strength of fly ash/slag cement and the acid corrosion resistance of this cement. Two alkali activator solution, NaOH and waterglass + NaOH solutions, were used. Waterglass concentration was the factor that gave the highest compressive strength in all tests. The next significant factor was the NaOH concentration, followed by curing temperature. Acid corrosion resistance of FC(fly ash cement) and FSC(fly ash/slag cement), such as sulfuric$(H_2SO_4)$ and hydrochloric acid(HCl), was for better than Portland cement(PC).

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.4
• /
• pp.485-490
• /
• 2004

An experiment was conducted to study the effect of feeding ammoniated wheat straw treated with and without HCl on meat quality and various sensory attributes of growing male buffalo (Bubalus bubalis) calves. Due to urea-ammoniation, the CP content of wheat straw increased from 2.90 to 6.96%. The addition of HCl along with urea during urea-ammoniation further increased the CP content to 10.09%. The proximate composition (% fresh basis) of psoas major, longissimus dorsi and semitendinosus were comparable among the groups. However, comparatively higher cumulative muscle mean protein and ash percentage and lower moisture percentage in groups II and III in comparison to group I indicated the desirable effect of feeding AWS and HCl-AWS. The cumulative muscle mean pH in group III (5.54) was comparatively lower than group I (5.65) and II (5.62). The cumulative group mean pH and water holding capacity (% water retained) in semitendinosus was comparatively lower than psoas major and longissimus dorsi. The cumulative muscle mean SSP (g%) was significantly (p<0.05) lower in group III (41.78) than group I (42.45). The cumulative group mean cooking loss (%) was significantly (p<0.01) lower in psoas major (31.61) and longissimus dorsi (29.78) than semitendinosus (35.10). The cumulative group mean SFV (kg/$cm^{2}$) of psoas major, longissimus dorsi and semitendinosus were 6.38, 6.32 and 6.56, respectively, being lowest in psoas major and highest in semitendinosus. However, the cumulative muscle mean SFV (kg/$cm^{2}$) in group I, II and III were 6.53, 6.56 and 6.17, respectively, being lowest in group III and highest in group II. The scores of the cooked (2% common salt) buffen for various sensory attributes viz. appearance, flavour, juiciness, texture, mouth coating and overall palatability were comparable among the groups. Results suggested that feeding of ammoniated wheat straw treated with and without HCl to growing male buffalo calves for 180 days had no adverse effect on the meat quality and various sensory attributes.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.53-58
• /
• 2018

Solvent extraction of Li(I) from weak HCl solution was investigated by the mixture of TBP/MIBK with other neutral extractants such as Cyanex 923, TOPO and TOP. The TBP/MIBK organic phase was loaded with 0.1 M $FeCl_3$ at different HCl concentrations (1-9 M). Extraction of Li(I) from weak HCl solution is related to the stability of $FeCl_3$ in the organic mixture. As HCl concentration increased in preparing the loaded TBP phase, the stripping percentage of Fe(III) during the extraction of Li(I) became reduced and thus Li(I) could be extracted by ion exchange reaction with hydrogen ion in the organic. The concentration of TBP in the extractant mixture affected the stability of $FeCl_3$. Compared to TBP, Fe(III) was easily stripped from the loaded MIBK and thus no Li(I) was extracted by the mixture with MIBK. The nature of neutral extractant with TBP/MIBK showed little difference in the extraction of Li(I) and stripping of Fe(III).

• Korean Journal of Food Science and Technology
• /
• v.51 no.4
• /
• pp.404-409
• /
• 2019

This study was performed to determine the optimum conditions for the production of gaseous chlorine dioxide ($ClO_2$) from aqueous $ClO_2$ (HCl+$NaClO_2$). When 1 N HCl was reacted with various concentrations of $NaClO_2$ (50,000-500,000 mg/mL), the highest concentration (695 mg/L) of gaseous $ClO_2$ was obtained from the aqueous $ClO_2$ containing $100,000{\mu}g/mL$ $NaClO_2$. Next, the effects of relative humidity (RH; 43, 85, and 100%) and temperature (4, 12, and $25^{\circ}C$) on the production of gaseous $ClO_2$ were investigated. It was observed that the concentration of gaseous $ClO_2$ was increased as RH was decreased, or the temperature was increased. Finally, it was confirmed that the amount of gaseous $ClO_2$ was highly correlated ($R^2=0.9546-0.9992$) with the volume of aqueous $ClO_2$. The results of this study provide useful information for designing a sanitization program using gaseous $ClO_2$ under various environmental conditions.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.3
• /
• pp.17-22
• /
• 2007

The feasibility of soil washing was investigated to remediate Pb-contaminated field soil. Hydrochloric acid was used as a washing agent. As mixing time increased from 5 min to 120 min, removal efficiency of Pb from contaminated soil increased from 69.3% to 81.9%. Two times washing with 0.2 M HCl showed 96% removal efficiency even at mixing time of 10 min. The Pb content in soil increased sharply as particle size of soil decreased, and removal efficiency was highly dependent on mixing time and temperature. Based on this result, acid washing technologies can be applied to remediate the Pb-contaminated soil used in this study.

• Applied Science and Convergence Technology
• /
• v.26 no.6
• /
• pp.218-222
• /
• 2017

This study was conducted to remove $NO_x$, which is the main cause of fine dust and air pollution as well as acid rain. $NO_x$ was tested using 3% NO (diluted in He) as a simulated gas. Experiments were sequentially carried out by oxidizing NO to $NO_2$ and absorbing $NO_2$. Especially, we focused on the changes of NO oxidation according to both oxidant ($NaClO_2$) concentration change (1~10 M) and oxidant pH change (pH = 1~5) by adding HCl. In addition, we tried to suggest a method to improve $NO_2$ absorption by conducting $NO_2$ reduction reaction with reducing agent (NaOH) concentration (40~60%). It was found that NO removal efficiency increased as both concentration of oxidant and flow rate of NO gas increased, and NO decreased more effectively as the pH of hydrochloric acid added to the oxidant was lower. The $NO_2$ adsorption was also better with increasing NaOH concentration, but the NO removal efficiency was ~20% lower than that of the selective NO reduction. Indeed, this experimental method is expected to be a new method that can be applied to the capture and removal of fine dust caused by air pollution because it is a method that can easily remove NO gas by a simple device without expensive giant equipment.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.70-76
• /
• 2011

High-quality double-walled carbon nanotubes (DWCNTs) were synthesized by catalytic decomposition method at $800^{\circ}C$ using Tetrahydrofuran. The as-synthesized DWCNTs typically have catalytic impurities and amorphous carbon, which were removed by two-step purification process, consisting of thermal oxidation and H2O2, HNO3, HCl treatment. The DWCNT suspension was prepared by dispersing the purified DWCNTs in an aqueous sodium dodecylbenzenesulfonate solution with horn-type sonication. This was then sprayed on ITO glass to fabricate CNT field emitters. The quality of purified DWCNTs was estimated with X-ray diffraction and Thermal Gravity Analysis. The field emission properties were improved by increasing the process time of HCl treatment.

• Analytical Science and Technology
• /
• v.16 no.2
• /
• pp.110-116
• /
• 2003

A study has been done on the separation of iodide from spent pressurized water reactor (PWR) fuels and its quantitative determination using ion chromatography. Spent PWR fuels were dissolved with mixed acid of nitric and hydrochloric acids (80 : 20 molL%) which can oxidize iodide to iodate to prevent it from be vaporized. After reducing ${IO_3}^-$ ­to $I_2$ in 2.5 M $HNO_3$ with $NH_2OH{\cdot}HCl$, Iodine was selectively separated from actinides and all other fission products with carbontetrachloride and back-extracted with 0.1 M $NaHSO_3$. Recovered iodide was determined using the ion chromatograph of which the column was installed in a glove box for the analysis of radioactive materials. In practice, spent PWR fuel with 42,000~44,000 MWd/MtU was analyzed and its quantity was compared to that calculated by burnup code, ORIGEN2. The agreement was achieved with a deviation of -8.3~-0.5% from the ORIGEN 2 data, $324.5{\sim}343.6{\mu}g/g$.

• Journal of the Korean Institute of Gas
• /
• v.22 no.4
• /
• pp.55-62
• /
• 2018

There is growing interest in solar power generation due to global warming. As a result, demand for polysilicon, which is the core material for solar cells, is increasing day by day. As the market grows, large and small accidents occurred in the production process. In 2013, hydrochloric acid leaked from the polysilicon manufacturing plant in SangJu. In 2014, a fire occurred at a polysilicon manufacturing plant in Yeosu, and in 2015, STC(Silicon Tetrachloride) leaked at a polysilicon manufacturing plant in Gunsan City. Leakage of chemicals in the polysilicon manufacturing process can affect not only the workplace but also the surrounding area. Therefore, in this study, we identified the hazardous materials used in the polysilicon manufacturing process and quantitatively estimate the amount of leakage and extent of damage when the worst case scenario is applied. As a result, the damage distance by explosion was estimated to be 726 m, and the damage distance to toxicity was estimated to be 4,500 m. And, if TCS(Trichlorosilane), STC(Silicon Tetrachloride), DCS(Dichlorosilane) leaks into the air and reacts with water to generate HCl, the damage distance is predicted to 5.7 km.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.153-157
• /
• 2005

4-(Dimethylamino)pyridinium dichromate was synthesized by the reaction of 4-(dimethylamino)pyridine with chromium(VI)trioxide in $H_2O$, and characterized by IR, EA and ICP. The oxidation of benzyl alcohol using 4-(dimethylamino)pyridinium dichromate in various solvents showed that the reactivity increased with the increase of the dielectric constant, in the order: cyclohexen < chloroform < acetone < N,N-dimethylformamide. In the presence of hydrochloric acid(HCl), 4-(dimethylamino)pyridinium dichromate oxidized benzyl alcohol and its derivatives ($p-CH_3$, H, m-Br, $m-NO_2$) smoothly in N,N-dimethylformamide. Electron-donating substituents accelerated the reaction, whereas electron-withdrawing groups retarded the reaction. The Hammett reaction constant($\rho$) was -0.70 at 303K. The observed experimental data have been rationalized as follows: the proton transfer occurs after the prior formation of a chromate ester in the rate-determining step.