• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.739-745
• /
• 2017

Research of ADN-based monopropellant thruster is progressed by developed countries in Europe to replace toxic hydrazine, and ADN-based monopropellant thruster system is the only system that was proved in space environment. In this research, ADN-based propellant and catalyst was fabricated to develop ADN-based monopropellant thruster, and catalytic combustion performance with fabricated propellant and catalyst were evaluated with DSC-TG analysis. Catalytic combustion of propellant and catalyst was determined with firing test using 5 N scale liquid monopropellant thruster.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.406-408
• /
• 2017

Ammonium dinitramide (ADN) Low toxicity monopropellant based 1N class thruster and test equipment were developed. Compared with the hydrazine which used in existing satellite thruster, ADN is easy to handle and has excellent physical characteristics such as density and specific impulse. Due to these characteristics, ADN is attracting attention as an eco-friendly propellant. In this paper, 1N class thruster and thrust measurement system was designed for performance testing of ADN monopropellant. The composition of the propellant for the design and experiment was set at 11.2: 25.4: 63.4 for each of Methanol: $H_2O$: ADN.

• Archives of Pharmacal Research
• /
• v.28 no.7
• /
• pp.775-783
• /
• 2005

The ethanol extract of the peony root (Paeonia Lactiflora Pall, Paeoniaceae) as well as its major active components including gallic acid and methyl gallate were evaluated for their protective effects against free radical generation and lipid peroxidation. In addition, the protective effects against hydrogen peroxide-induced oxidative DNA damage in a mammalian cell line were examined. The ethanol extracts of the peony root (PREs) and its active constituents, gallic acid and methyl gallate, exhibited a significant free radical scavenging effect against 1,1-diphenyl-2-picryl hydrazine (DPPH) radical generation and had an inhibitory effect on lipid peroxidation, as measured by the level of malondialdehyde (MDA) formation. The PREs did not have any pro-oxidant effect. They strongly inhibited the hydrogen peroxide-induced DNA damage from NIH/3T3 fibroblasts, as assessed by single cell gel electrophoresis. Furthermore, the oral administration of 50% PRE (50% ethanol extract of peony root), gallic acid and methyl gallate potently inhibited the formation of micronucleated reticulocytes (MNRET) in the mouse peripheral blood induced by a $KBrO_3$ treatment in vivo. Therefore, PREs containing gallic acid and methyl gallate may be a useful antigenotoxic antioxidant by scavenging free radicals, inhibiting lipid peroxidation and protecting against oxidative DNA damage without exhibiting any pro-oxidant effect.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.9
• /
• pp.455-463
• /
• 2002

Ionic Polymer metal composite(IPMC), one of new actuation materials of EAPs is fabricated by electroless plating of platinum on both sides of the perfluorosulfonic acid film or Nafion film and its electromechanical characteristics are investigated. The IPMC strip bends towards anode under electrical field. As the number of plating cycle increases, the distance between plated platinum electrodes on both sides of Nafion membrane decreases and also the displacement is almost inversely proportional to the number of plating. The displacement of IPMC strip depends on voltage magnitude and applied signal frequency and its maximum deformation is observed at a critical frequency, resonant frequency. Low pressure sandblasting is used for surface treatment of Nafion membrane and at 8 times of plating cycle produced actuator with high displacement performance. For more efficiency of fabricated IPMC, it is useful to add one or two surface developing step which is the second reduction process using hydrazine.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.9
• /
• pp.687-692
• /
• 2011

Hafnium oxide ($HfO_2$) was very advantageous for substitute material of gate on existing transistor. $HfO_2$ has been widely studied due to high contact with polysilicon and thermal stability and also, it is easily etched by using HF solution. In this study, $HfO_2$ and thermal oxide films were etched by wet etch method using chemical etchant. Etch rate of $HfO_2$ and thermal oxide was linearly increased with increasing concentration of HF and temperature but etch rate of $HfO_2$ was higher than thermal oxide due to $H^+$, $F^-$, and $HF_2^-$ ions at below 0.5% concentration of HF. And also, etch selectivity was improved by adding Hydrazine as additive.

• Journal of the Korean institute of surface engineering
• /
• v.26 no.6
• /
• pp.291-298
• /
• 1993

In order to substitute for porous nickel anode in Molten Carbonate Fuel Cell(MCFC), porous cermet elec-trode was fabricated with Ni and Ni-P coated ceramic powder. Ni and Ni-P were coated by electroless plat-ing method in the nickel solution containing of hydrazine and sodium hypophosphate as a reducing agent. The plating solution was stirred by air and mechanical agitator. Ultrasonic irradiation was applied to the plating bath to improved the effect of agitation and coating speed. Electorde was formed by pressing method and doc-tor blade method followed by sinterd at$ 800^{\circ}C$ for 6 hours in H2 environment. Anode performance test carried out by potentiodynamic polarization technique in the MCFC operating condition and 154-161mA/$\textrm{cm}^2$ as ob-tained as a anode current density at the+100mV overpotential.

• Archives of Pharmacal Research
• /
• v.20 no.6
• /
• pp.620-628
• /
• 1997

6-Aryl-5-cyano-4-pyrimidinon-2-thione derivatives 1a-c reacted with ethyl iodide to give the corresponded 2-S-ethylpyrimidin-4-one-derivatives 2a-c. Compounds 2a-c was, in turn, reacted with hydrazine hydrate to give the sulfur free reaction products, 3a-c. These reaction products were taken as the starting materials for the synthesis of several newly synthesized heterocyclic derivatives. Reactions with several halogenated ketones, esters, chloroacetic acid and chloroacetamide give pyrimidotriazines 8,12 and 15 while their reactions with formic acid, acetic acid and carbon disulfide gave the corresponded triazolopyrimidines 17 and 21. The reaction with both acetyl acetone and ethylacetoacetate gave the corresponded 2-$(3^{I},5^{I}-dimethyl-1^{I}-pyrazoly$pyrimidine derivatives 20a-c and 24a-c respectively while the reaction with cinnamonitriles 25a-h afforded the corresponded aryl hydrazopyrimidines 27a-f. The structure of these reaction products were eatablished based on both elemental anlayses and spectral data studies.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.42-45
• /
• 2012

As a basic research for the development of Korean lunar lander, propulsion system development for ground test is in progress. Design target is 220 N in ground thrust at 130 g/s flow rate, 200 psi chamber pressure. For the performance improvement, two type injector and catalyst bed was designed. For ground test, thrust measurement system using LM guide was developed and test was performed. The result shows 214.1 N thrust in atmosphere condition at 126.6 g/s flow rate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.167-171
• /
• 2012

A computational analysis of nozzle flow is conducted to investigate effects of the flight altitude on thrust performance. Reynolds-averaged Navier-Stokes equation with k-${\omega}$ SST(Shear Stress Transport) turbulence model is employed to simulate the nozzle flow in various altitude conditions, where continuum mechanics is to be valid. Thrust performance of the nozzle is exceedingly poor upto 10 km of flight altitude because of the irreversible phenomena such as shock and/or flow separation occurring inside the nozzle, whereas it is restored to the nominal value as the altitude is attained higher than 30 km.

• YAKHAK HOEJI
• /
• v.33 no.5
• /
• pp.290-295
• /
• 1989

2,6-Dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3-carboxylic acid methyl ester (1) was formylated to 2,6-dimethy-4-(3'-nitrophenyl)-5-formyl-1,4-dihydropyridine-3-carboxylic acid methyl ester (2) in 76% yield. At the elevated temperature, 2,6-dimethyl-4-(3'-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylic acid 3-monomethyl ester (3) was also converted into compound 2 in 46% yield. The compound 2 was reduced to 2,6-dimethyl-4-(3'-nitrophenyl)-5-hydroxymethyl-1,4-dihydropyridine-3-carboxylic acid methyl ester (4) in 91% yield. Compound 2 was reacted with triethyl phosphonoacetate to give 2,6-dimethyl-4-(3'-nitrophenyl)-5-(2-ethoxycarbonyl ethenyl)-1,4-dihydropyridine-3-carboxylic acid methyl ester (5) in 50% yield. Reaction between compound 2 and amines (methyl amine, ethylamine, methoxylamine, hydroxyl amine, phenyl hydrazine and 1-amino-4-methyl piperazine) gave six schiff bases 7a, 7b, 7c, 7e, 7f in 81%, 91%, 82%, 81%, 50% and 84% yield, respectively.