• 유공압시스템학회논문집
• /
• 제6권1호
• /
• pp.25-31
• /
• 2009

This study presents an analytical model of hydraulic clutch system of a power shift transmission to analyze pressure modulation characteristics. A typical hydraulic clutch system was modeled by using AMESim in which the parameters of major components were measured for simulation. Test apparatus was established using the components of power shift and power shuttle clutches with instrumental equipment. The results of simulation and experiment were so close that the proposed analytical model in this study was validated. However the cylinder model analogized clutch dynamics need to be improved in future study. The effects of parameters of orifice diameter, accumulator stroke and oil temperature on pressure modulation were analyzed respectively. The results of parameter sensitivity analysis show that modulation time and set pressure can be easily adjusted by changing parameter values. It is also found that the hydraulic clutch system used in this study is so susceptible to oil temperature that cooling equipment is necessary.

• International Journal of Fluid Machinery and Systems
• /
• 제8권4호
• /
• pp.318-326
• /
• 2015

A valve-less electro-hydraulic servo steering device (short: VSSD) for ships was chosen as a study object, and its mathematic model of hydraulic shock was established on the basis of flow properties and force balance of each component. The influence of system structure parameters, changing rate of motor speed and external load on hydraulic shock strength was simulated by the method of numerical simulation. Experiment was designed to test the hydraulic shock mathematic model of VSSD. Experiment results verified the correctness of the model, and the model provided a correct theoretical method for the calculation and control of hydraulic shock of valve-less electro-hydraulic servo steering device.

• 수산해양기술연구
• /
• 제29권3호
• /
• pp.214-219
• /
• 1993

Counter balance valve is used as one part of hydraulic motor brake system. The function of this valve is to protect over-run or free falling of inertia load. But occasionally the brake system with counter balance valve makes some undesirable problems such as pressure surges or vibrations. These problems may hurt system safety and driver's conformability. Nevertheless, studies on dynamic characteristics of hydraulic system including counter balance valve are very rare, so further accumulation of research results are required. In this study, for the purpose of easy estimation about dynamic characteristics of hydraulic system including counter balance valve, precise formulation describing fluid dynamics and valve dynamics under various boundary conditions were made. The equations obtained in the preceding process include some parameters that must be got experimentally. Flow coefficients of valve and choke are the most significant ones among the parameters. So these parameters are obtained experimentally in this study, and experimental equations obtained from the experimental data were used for numerical calculation. The equations were analysed by numerical integration using Runge-Kutta method, because the equations contain various nonlinear terms. From the numerical analysis, it was verified that the dynamic response of counter balance valve and pressure variation at each elements can be estimated very easily. So the analysing method developed in this study enabled very easy estimating the relation between the performances of counter balance valve and various physical parameters related to the valve. Conclusively, it is said that the results obtained in this study can be used very usefully to develop a new type counter balance valve or to apply the valve to actual hydraulic system for various industrial equipments.

• 대한기계학회논문집B
• /
• 제24권8호
• /
• pp.1119-1127
• /
• 2000

Convective heat transfer in a channel filled with porous media has been analyzed in this paper. The two-equation model is applied for the heat transfer analysis with the velocity profile, considering both the inertia and viscous effects. Based on a theoretical solution, the effect of the velocity profile on the convective heat transfer is investigated in detail. The Nusselt number is obtained in terms of the relevant physical parameters, such as the Biot number for the internal heat exchange, the ratio of effective conductivities between the fluid and solid phases, and hydraulic boundary layer thickness. The results indicate that the influence of the velocity profile is characterized within two regimes according to the two parameters, the Biot number and the conductivity ratio between the phases. The decrease in the heat transfer due to the hydraulic boundary layer thickness is 15% at most within a practical range of the pertinent parameters.

• 대한지하수환경학회지
• /
• 제3권1호
• /
• pp.1-8
• /
• 1996

해양 투기 매립장은 바다를 메워서 만들었으므로 그 속에서의 지하수 수리 특성은 대수층이나 일반 육상 매립지안의 지하수 수리 특성과 크게 다르다. 포항 지역의 해양 투기 매립지에서 양수 시험이나 순간수위 변화 시험으로 수리 특성을 파악하기 어려워서 조석 현상과 지하수위 변화로 부터 수리 특성을 추정하였다. 투기 매립지의 지하수위는 인근 해수면보다 약 40 cm 높게 관측되었고, 그 이유를 추정하였다 매립지내 지하수와 해수와의 상관 관계는 매립지내 지하수 수질의 수직적 분포로도 설명된다.

• 지질공학
• /
• 제4권2호
• /
• pp.219-229
• /
• 1994

균열 암반내 지하수 흐름은 공간적으로 불규칙하게 분포하는 균열 발달 상태에 영향을 받으므로 균질의 등방성 피압 대수층에 적용이 가능한 Theis식으로는 균열 암반 대수층의 수리지질학적 특성을 똑바로 이해할 수 없다. 본 연구에서는 지하수 흐름의 프락탈(Fractal)모델을 발전시킨 누수를 포함하는 프락탈모델의 이론적은 배경 및 수리상수 산출 방법을 제시하고,개발된 모델을 야외자료에 적용시켰다. 상기 모델은 홍천과 유성지역에서 수행된 양수시험 자료에 적용시킨 결과, 동일한 수리상수 값으로 양수정과 관측정에서의 관측된 수위하강 곡선과 이론적인 수위하강 곡선이 잘 일치하는 결과를 얻었다. 홍천 지역과 유성 지역의 시험공 주위의 프락탈 차원은 1.9로 구해졌으며, 이것은 이들 지역의 지하수 흐름이 2차원보다 약간 작은 프락탈 차원을 보인다는 것을 지시한다.

• Nuclear Engineering and Technology
• /
• 제42권5호
• /
• pp.562-567
• /
• 2010

A One-Dimensional Water Flow and Contaminant Transport in Unsaturated Zone (FTUNS) code has been developed in order to interpret radionuclide migration in an unsaturated zone. The pore-size distribution index (n) and the inverse of the air-entry value ($\alpha$) for an unsaturated zone were measured by KS M ISO 11275 method. The hydraulic parameters of the unsaturated soil are investigated by using soil from around a nuclear facility in Korea. The effect of hydraulic parameters on radionuclide migration in an unsaturated zone has been analyzed. The higher the value of the n-factor, the more the cobalt concentration was condensed. The larger the value of $\alpha$-factor, the faster the migration of cobalt was and the more aggregative the cobalt concentration was. Also, it was found that an effect on contaminant migration due to the pore-size distribution index (n) and the inverse of the air-entry value ($\alpha$) was minute. Meanwhile, migrations of cobalt and cesium are in inverse proportion to the Freundich isotherm coefficient. That is to say, the migration velocity of cobalt was about 8.35 times that of cesium. It was conclusively demonstrated that the Freundich isotherm coefficient was the most important factor for contaminant migration.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.45-53
• /
• 2019

Thermal-hydraulic passive safety systems (PSSs) are incorporated into many advanced reactor designs on the bases of simplicity, economics and inherent safety nature. Several factors among which are the critical parameters (CPs) that influence failure and reliability of thermal-hydraulic (t-h) passive systems are now being explored. For simplicity, it is assumed in most reliability analyses that the CPs are independent whereas in practice this assumption is not always valid. There is need to critically examine the dependency influence of the CPs on reliability of the t-h passive systems at design stage and in operation to guarantee safety/better performance. In this paper, two multivariate analysis methods (covariance and conditional subjective probability density function) were presented and applied to a simple PSS. The methods followed a generalized procedure for evaluating t-h reliability based on dependency consideration. A passively water-cooled steam generator was used to demonstrate the dependency of the identified key CPs using the methods. The results obtained from the methods are in agreement and justified the need to consider the dependency of CPs in t-h reliability. For dependable t-h reliability, it is advisable to adopt all possible CPs and apply suitable multivariate method in dependency consideration of CPs among other factors.

• 대한기계학회논문집A
• /
• 제38권5호
• /
• pp.475-482
• /
• 2014

유압밸브 구동용 서보 액추에이터는 항공기, 자동차의 유압시스템 그리고 산업용 유압시스템의 정밀한 작동에 중요한 장치이다. 서보 액추에이터의 신뢰성 있는 동작은 전체 유압시스템의 정밀한 제어에 큰 영향을 미친다. 서보 액추에이터의 주파수 응답특성, 스텝 응답특성과 같은 응답특성은 액추에이터의 성능을 판단하는 중요한 기준이 된다. 본 논문에서는 신뢰성해석을 통해 신뢰성 있는 동작과 응답특성을 만족시키기 위한 구성 부품에 대한 분석을 실시하였다. 또한 신뢰성 있는 동작과 빠른 응답성을 구현하기 위해 현장의 경험적 지식과 문헌 및 전문가의 전자기 이론을 통해 유압밸브 구동용 서보 액추에이터의 설계 파라미터를 도출하였다. 보빈, 요크, 플런저의 설계값, 그리고 코일의 감긴 수와 같은 서보 액추에이터의 설계값들을 결정하는 설계 파라미터를 제안하고, 설계방정식을 통해 산출한 설계값을 유한요소해석을 통해 타당성을 검증하였다. 또한 서보 액추에이터가 장착된 유압밸브의 성능시험을 통해 제안한 설계 방안의 타당성을 검증하였다.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.148-154
• /
• 2000

In this study, the static and the dynamic characteristics of the load-sensitive hydraulic pump control systems of a hydraulic excavator were analyzed using the developed analysis tool. The results were compared with the experimental ones. To improve the static performance of the system, the system parameter effects on the controllable region and the pump pressure variation were studied. The parameters enhancing dynamic characteristics were also considered.