• Journal of Korean Ophthalmic Optics Society
• /
• 제18권4호
• /
• pp.457-463
• /
• 2013

To determine the impact of artificial tears which include carboxymethyl cellulose on a hydrogel contact lenses. Methods: A contact lenses made of the cross-linking agent, EGDMA (ethylene glycol dimethacrylate) and HEMA (2-hydroxyethyl methacrylate) and with added NVP (n-vinyl-2-pyrrolidone) and MMA (methyl methacrylate) was evaluated for water content, refractive index, spectral transmittance and contact angle of produced contact lens. Results: The physical properties of the sampled copolymerized polymers showed that water content, refractive index, visible ray transmittance and contact angle were in the range of 26.61%~48.58%, 1.422~1.455, 80.8%~91.4% and $33.93^{\circ}{\sim}65.70^{\circ}$, respectively. In addition, after soaking with artificial tears, the water content, refractive index and contact angle were in the range of 24.46%~48.25%, 1.422~1.457, 77.0%~91.0% and $37.25^{\circ}{\sim}77.33^{\circ}$, respectively. The changes of the physical property depending on hydration time and showed an increase of refractive index and contact angle, decrease of water content and visible ray transmittance. Conclusions: Artificial tears which include carboxymethyl cellulose sodium which is used as a wetting agent influenced water content, refractive index, contact angle and spectral transmittance of a hydrogel contact lenses.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• 제33권1호
• /
• pp.17-22
• /
• 2007

In this study, we investigated the effects of Sedum sarmentosum extract on the expression of hyaluronan synthase (HAS) genes and hyaluronan (HA) production in HaCaT keratinocytes. We also assessed water content (electrical capacitance) and transepidermal water loss (TEWL) in human skin after topical treatment with Sedum sarmentosum extract. Sedum sarmentosum extract increased expression of HAS-2 and HAS-3 genes in HaCaT cells, when assayed by real-time reverse-transcriptase polymerase chain reactions (RT-PCR). Sedum sarmentosum extract induced HA production in HaCaT cells, when determined by enzyme-linked immunosorbent assay (ELISA). Finally, treatment of Sedum sarmentosum extract on human skin increased the skin hydration and decreased TEWL when measured using Corneometer and Tewameter. Our study suggests that Sedum sarmentosum extract should be a very useful cosmetic ingredient, as a skin moisturizer.

• Journal of the Korea Concrete Institute
• /
• 제27권3호
• /
• pp.237-244
• /
• 2015

Entering the 20th century since the industrial revolution, the cement has been widely used in the field of construction and civil engineering due to the remarkable development of construction industry. However, result from that development, each kind of industrial by-products and waste and the carbon dioxide generated in the process of cement production cause air pollution and environmental damage so earth is getting sick now slowly. Therefore, we have to recognize importance about this. It means that the time taking specific and long-term measures have come. In this research paper, as substitution of the cement generating environmental pollution, we investigate the hydration reaction of non-Sintered Cement mortar mixed with GBFS, active stimulant of alkaline and sulphate series by using SEM and XRD, mechanical and chemical properties according to the curing method. As a result of this experiment, NSC realized outstanding strength for water curing and steam curing. It means that it has a good possibility as substitution of cement. From now on, it can be used for structure satisfying specific standard. We expect to find a substitution of outstanding cement by progressing continuous research making the best use of pros and cons according to the curing method.

• Journal of Yeungnam Medical Science
• /
• 제21권2호
• /
• pp.198-206
• /
• 2004

Background: To evaluate the efficacy and safety of paclitaxel and cisplatin against advanced non-small cell lung cancer (NSCLC) as a second-line chemotherapy. Subjects and Methods: Twenty-five patients were enrolled. The patients received 200 $mg/m^2$ paclitaxel as a 3-hour intravenous infusion and 60 $mg/m^2$ cisplatin as 2D-minute intravenous infusion with vigorous hydration on day 1 every 28 days. The response was assessed every 2 cycles. Results: All 25 patients were assessed for their response and toxicity. Partial responses were observed in 5 patients. The overall response rate was 20%(95% confidence interval, 4%-36%) and the median response duration was 4.5(range, 2-11) months. The median time to progression was 3.3(range, 0-14) months. The median overall survival of all patients was 7.4(range, 1.3-39) months. The hematologic toxicities were minor and easily controlled. Conclusion: The combination chemotherapy of paclitaxel and cisplatin as a second-line treatment has a moderate efficacy with an acceptable toxicity in patients with advanced NSCLC.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• 제21권1호
• /
• pp.6-14
• /
• 2011

The re-crystallization process for recovering granular crystalline gypsum from phospho-gypsum have proposed. The process consists of two stages; at the first stage, needle-like fine gypsum is recovered with under-product of 325 mesh wet screening after the speedy hydration of dehydrated phospho-gypsum, and at the second stage, granular crystalline gypsum is recovered with upper-product of 325 mesh wet screening after dehydration and re-crystallization of the needle-like fine gypsum in $Na_2SO_4$ solution. This paper is mainly focused on the influence of dehydration time, cooling speed of temperature and re-crystallization temperature on the recovery of granular crystalline gypsum. And the re-crystallization velocity of needle-like fine gypsum at room temperature and the variation of $Ca^{2+}$ concentration of gypsum slurry during over all re-crystallization process were also discussed.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권1호
• /
• pp.125-129
• /
• 2016

Background: Patients with differentiated thyroid cancers (DTC) who receive radioactive iodine-131 (RAI) are released from isolation when their dose rate is below the regulatory requirements. The purpose of this study was establish predicting factors for early release from the isolation facility after RAI administration in patients with DTC. Materials and Methods: This was a prospective study which included 96 (58 females and 38 males) patients with DTC who had received RAI from April 2013 till August 2015. The study was duly approved by the ethical committee of the institute. Patients who had complete information of primary tumor size (PTS), serum TSH, stimulated thyroglobulin level [sTg] with antibodies (IU/ml) at the time of RAI treatment were included. All had a normal serum creatinine level. To attain lower effective half-life good hydration and administration of soft laxative were ensured. Dose rate was measured (immediately, 24 h and 36 h) at 1 meter distance from anterior mid trunk and a dose rate <$50{\mu}Sv/h$ was considered as the releasing criterion. At 24 h 50 patients were released while the remaining 46 patients were released at 36 h. A post-ablative whole body scan (PA-WBIS) was performed 5-8 days after RAI ablation in all patients. Results: Patients released after 24 h were significantly younger, had smaller lesions with higher proportion of papillary cancer, lower sTg, lower sTg/TSH ratio and had received a lower dose of RAI as comapred to those who were discharged after 36 h. Serum TSH and gender were not found to have any significant correlation between two cohorts. ROC and multivariate analysis have shown age ${\leq}37years$, PTS ${\leq}3.8cm$, $RAI{\leq}150mCi$, $sTg{\leq}145ng/ml$ and $sTg/TSH{\leq}1.085$ as strong indepedent predictors for early release. Conclusions: We conclude that younger age (${\leq}37years$), smaller tumor size (${\leq}3.8cm$), lower RAI dose (${\leq}150mCi$), lower sTg (${\leq}145ng/ml$) and a lower sTg/TSH ratio (${\leq}1.085$) are significant independent predictors for release at 24 h after RAI treatment in DTC patients. Effective utilization of these factors could help the treating physicians to use limited number of internment facilities with higher throughput, lower cost and lower psychological stress to patients.

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제22권6호
• /
• pp.669-680
• /
• 2020

In Korea, fireproof performance is evaluated through a series of fire-resistance tests for important structures, and the performance standard follows the guidelines suggested by ITA. The fireproof duct slab manufactured by combining the slab and the fireproof material with a precast method is effective in that it can eliminate the construction time of the fireproof material. In this study, a series of fire resistance tests was performed on the fire test specimens under the RWS fire scenario in order to secure the fire resistance performance of the precast fireproof duct slab. As a result of the test, it was found that the fireproof performance was secured when the thickness of the fireproof material was 30 mm or more. In both fireproof materials and concrete, the rate of temperature change initially increased, then decreased, and then increased again, and the temperature at the inflection point was measured as 110℃ for all fireproof materials and concrete. It is judged that this occurs when the C-S-H (CaO-SiO₂-H₂O) generated by the hydration reaction in both the fireproof material and concrete is dehydrated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제16권6호
• /
• pp.163-170
• /
• 2012

With the advantage of a rapid exothermic reaction property, jet set concrete may be used as a cold weather concrete because it can reach the required strength before being damaged by cold weathers. And it can be hardened more quickly if the field temperature is properly compensated by heating. Because ordinary concrete cannot be hardened well under sub-zero temperatures, anti-freeze agents are typically added to prevent the frost damage and to ensure the proper hardening of concrete. While the addition of a large amount of anti-freeze agent is effective to prevent concrete from freezing and accelerates cement hydration resulting in shortening the setting time and enhancing the initial strength, it induces problems in long-term strength growth. Also, it is not economically feasible because most anti-freeze agents are mainly composed of chlorides. Recent studies reported that magnesia-phosphate composites can be hardened very quickly and hydrated even in low temperatures, which can be used as an alternative of cold weather concrete for cold weathers and very cold places. As a preliminary study, to obtain the material properties, mortar specimens with different mixture proportions of magnesia-phosphate composites were manufactured and series of experiments were conducted varying the curing temperature. From the experimental results, an appropriate mixture design for cold weathers and very cold places is suggested.

• Journal of the Mineralogical Society of Korea
• /
• 제24권3호
• /
• pp.151-164
• /
• 2011

Mineralogical and petrological characteristics were investigated on matrix of dense gray, vesiculate gray, brown and black pumice in Ulleung Island by using XRD, FT-IR, XRF, SEM and thermal analysis. According to the analysis, most of pumice matrix are amorphous and include very small amount of sanidine and anorthoclase. Since the adsorption moistures, which commonly observed as O-H peak in FT-IR spectrum, are not identified in thermal analysis, it seems reasonable to conclude that content of the adsorption moisture has very low level. Although pumice has a large specific surface area, with long time elapsed after eruption, pumice matrix shows very low degree of hydration alteration due to the low level of water content. In SEM images, most surfaces of pumice show morphological characteristics such as various shapes of vesicle with wrinkled and thin walls resulted from ductile coalescence. Dense gray pumice formed in the initial stage includes small vesicles less than $15{\mu}m$ in size with subangular to angular shapes, free of ovoid vesicle. These characteristics are interpreted to have related to the hydrous environment derived from phreato-plinian eruption. Submicron particles observed as amorphous alumina silicate assemblages in vesicle surface are considered as particles sticked to the matrix surface through rapidly cooling process during ascent of alkali phonolitic magma. It indicates that these particles coexisted partly with crystallized alkali feldspar.

• The Journal of Engineering Geology
• /
• 제30권2호
• /
• pp.185-198
• /
• 2020

High-density rapid expansion material is a method that increases the solid volume of injection materials due to hydration and foam reactions at the same time as spraying. It is an effective method for securing ground stability, restoring subsidence, and loading during construction of structures. In this regard, through the mechanical experiments of injection materials, the stability of the foundation ground of the structure and the effect of increasing the endurance using site construction were analyzed. The results of the experiment showed that the unit weight of soil decreased by 10.5% after injection of the filling material, and the allowable support for the structure was deemed safe, and the subsidence by each section after ground improvement was determined to be safe at 2.28, 1.55 and 0.46 cm, respectively, with an acceptable subsidence of less than 5 cm. After the field test, five inclinometers were installed on the top floor of the target building to measure the displacement of the X and Y axes. As a result of the measurement, no displacement related to the phenomenon of inequality or subsidence cracks of the structure was measured for about 16 months (509 days) after construction. This can be judged to be a sufficient increase in the stability of the ground after the injection of rapid expansion.