• Journal of Internet Computing and Services
• /
• v.22 no.5
• /
• pp.57-67
• /
• 2021

Modern cloud computing is rapidly changing from traditional hypervisor-based virtual machines to container-based cloud-native environments. Due to limitations in I/O performance required for both virtual machines and containers, the use of high-speed storage (SSD, NVMe, etc.) is increasing, and in-memory computing using main memory is also emerging. Running a virtual environment on main memory gives better performance compared to other storage arrays. However, RAM used as main memory is expensive and due to its volatile characteristics, data is lost when the system goes down. Therefore, additional work is required to run the virtual environment in main memory. In this paper, we propose a hybrid in-memory storage that combines a block storage such as a high-speed SSD with main memory to safely operate virtual machines and containers on main memory. In addition, the proposed storage showed 6 times faster write speed and 42 times faster read operation compared to regular disks for virtual machines, and showed the average 12% improvement of container's performance tests.

• KIISE Transactions on Computing Practices
• /
• v.21 no.1
• /
• pp.88-93
• /
• 2015

In modern computer systems, DRAM is commonly used as main memory due to its low read/write latency and high endurance. However, DRAM is volatile memory that requires periodic power supply (i.e., memory refresh) to sustain the data stored in it. On the other hand, PCM is a promising candidate for replacement of DRAM because it is non-volatile memory, which could sustain the stored data without memory refresh. PCM is also available for byte-addressable access and in-place update. However, PCM is unsuitable for using main memory of a computer system because it has two limitations: high read/write latency and low endurance. To take the advantage of both DRAM and PCM, a hybrid main memory, which consists of DRAM and PCM, has been suggested and actively studied. In this paper, we propose a novel page replacement algorithm for hybrid main memory. To cope with the weaknesses of PCM, our scheme focuses on reducing the number of PCM writes in the hybrid main memory. Experimental results shows that our proposed page replacement algorithm reduces the number of PCM writes by up to 80.5% compared with the other page replacement algorithms.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.2
• /
• pp.117-123
• /
• 2016

In general, PCM (Phase Change Memory) is unsuitable as a main memory because it has limitations: high read/write latency and low endurance. However, the DRAM&PCM hybrid memory with the same level is one of the effective structures for a next generation main memory because it can utilize an advantage of both DRAM and PCM. Therefore, it needs an effective page management method for exploiting each memory characteristics dynamically and adaptively. So we aim reducing an access time and write count of PCM by using an effective page replacement. According to our simulation, the proposed algorithm for the DRAM&PCM hybrid can reduce the PCM access count by around 60% and the PCM write count by 42% given the same PCM size, compared with Clock-DWF algorithm.

• Communications of the Korean Institute of Information Scientists and Engineers
• /
• v.33 no.2
• /
• pp.16-41
• /
• 2015

• Structural Engineering and Mechanics
• /
• v.53 no.5
• /
• pp.1031-1049
• /
• 2015

This paper highlights the role of innovative vibration control system based on two promising properties in a parallel configuration. Hybrid device consists of two main components; recentering wires of shape memory alloy (SMA) and steel pipe section as an energy dissipater element. This approach concentrates damage in the steel pipe and prevents the main structural members from yielding. By regulation of the main adjustable design parameter, an optimum performance of the device is obtained. The effectiveness of the device in passive control of structures is evaluated through nonlinear time history analyses of a five-story steel frame with and without the hybrid device. Comparing the results proves that the hybrid device has a considerable potential to mitigate the residual drift ratio, peak absolute acceleration and peak interstory drift of the structure.

• Journal of KIISE
• /
• v.42 no.2
• /
• pp.183-189
• /
• 2015

Recently, computer systems have encountered difficulties in making further progress due to the technical limitations of DRAM based main memory technologies. This has motivated the development of next generation memory technologies that have high density and non-volatility. However, these new memory technologies also have their own intrinsic limitations, making it difficult for them to currently be used as main memory. In order to overcome these problems, we propose a hybrid main memory system, namely HyMN, which utilizes the merits of next generation memory technologies by combining two types of memory: Write-Affable RAM(WAM) and Read-Affable RAM(ReAM). In so doing, we analyze the appropriate WAM size for HyMN, at which we can avoid the performance degradation. Further, we show that the execution time performance of HyMN, which provides an additional benefit of durability against unexpected blackouts, is almost comparable to legacy DRAM systems under normal operations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.20-23
• /
• 2020

This research is to design an effective prefetching method required for DRAM-PCM hybrid main memory systems especially used for big data applications and massive-scale computing environment. Conventional prefetchers perform well with regular memory access patterns. However, workloads such as graph processing show extremely irregular memory access characteristics and thus could not be prefetched accurately. Therefore, this research proposes an efficient dynamical prefetching algorithm based on the regression method. We have designed an intelligent prefetch engine that can identify the characteristics of the memory access sequences. It can perform regular, linear regression or polynomial regression predictive analysis based on the memory access sequences' characteristics, and dynamically determine the number of pages required for prefetching. Besides, we also present a DRAM-PCM hybrid memory structure, which can reduce the energy cost and solve the conventional DRAM memory system's thermal problem. Experiment result shows that the performance has increased by 40%, compared with the conventional DRAM memory structure.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.2
• /
• pp.107-116
• /
• 2016

Density of Phase-Change Memory (PCM) devices has been doubled through the employment of multi-level cell (MLC) technology. However, this doubled-capacity comes in the expense of severe performance degradation, as compared to the conventional single-level cell (SLC) PCM. This negative effect on the performance of the MLC PCM detracts from the potential benefits of the MLC PCM. This paper introduces an efficient way of minimizing the performance degradation while maximizing the capacity benefits of the MLC PCM. To this end, we propose a location-aware hybrid management of SLC and MLC in compressed PCM main memory systems. Our trace-driven simulations using real application workloads demonstrate that the proposed technique enhances the performance and energy consumption by 45.1% and 46.5%, respectively, on the average, over the conventional technique that only uses a MLC PCM.

• Journal of KIISE
• /
• v.42 no.11
• /
• pp.1314-1321
• /
• 2015

Mobile devices employ buffer cache mechanisms, just as in computer systems such as desktops or servers, to mitigate the performance gap between main memory and secondary storage. However, DRAM has a problem in that it accelerates battery consumption by performing refresh operations periodically to maintain the stored data. In this paper, we propose a novel buffer cache scheme to increase the battery lifecycle in mobile devices based on a hybrid main memory architecture consisting of DRAM and non-volatile PCM. We also suggest a new buffer cache policy that allocates buffers based on process states to optimize the performance and endurance of PCM. In particular, our algorithm allocates each page to the appropriate position corresponding to the state of the application that owns the page, and tries to ensure a rapid response of foreground applications even with a small amount of DRAM memory. The experimental results indicate that the proposed scheme reduces the elapsed time of foreground applications by 58% on average and power consumption by 23% on average without negatively impacting the performance of background applications.

• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.275-278
• /
• 2006

Japan Aerospace Exploration Agency has introduced a new terascale clusterd SMP system as a main compute engine of Numerical Simulator III for aerospace science and engineering research purposes. The system is using Fujitsu PRIMEPOWER HPC2500; it has computing capability of 9.3Tflop/s peak performance and 3.6TB of user memory, with about 1,800 scalar processors for computation. In this paper, we first present the performance evaluation results for aerospace CFD applications with hybrid programming paradigm used at JAXA. Next we propose a performance prediction formula for hybrid codes based on a simple extension of AMhhal's law, and discuss about the predicted and measured performances for some typical hybrid CFD codes.