• ALGAE
• /
• v.26 no.1
• /
• pp.79-86
• /
• 2011

Physiological studies on the hybrid by crossing between two dioecious species, Porphyra pseudolinearis and P. dentata from Korea were conducted at constant temperatures (5, 10, 15, 20, and $25^{\circ}C$), at photon flux densities (10, 20, 40, and $80\;{\mu}mol\;m^{-2}s^{-1}$) under photoperiods (14 L : 10 D and 10 L : 14 D). In the hybrid, higher growth of conchocelis was observed at 20 and $40\;{\mu}mol\;m^{-2}s^{-1}$ under 14 L : 10 D. Conchosporangial branches were produced under $10-80\;{\mu}mol\;m^{-2}s^{-1}$ at only $25^{\circ}C$, and were abundant when the conchocelis was cultured under 10 L : 14 D. Foliose thalli of the hybrid grew well at the conditions of $10-20^{\circ}C$, 10 L : 14 D and $15-20^{\circ}C$, 14 L : 10 D. The foliose thalli grew very slowly at $5^{\circ}C$ and $30^{\circ}C$, respectively. No archeospores were observed at any culture conditions. Spermatangial and zygotosporangial sori were formed at the marginal portion of mature thallus. Zygotospores from the hybrid were released at $10-2^{\circ}C$ under both photoperiods, and gave rise to form conchocelis filament. Monoecious thalli were observed at $10^{\circ}C$ under 14 L : 10 D. Neither monospores nor protothalli were produced from the conchocelis in culture.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.72-78
• /
• 2003

In this paper, the feasibility study and the parametric design of hybrid motor with HTPB/LOX were conducted for micro air launch system. Design results were compared with 1st stage of Pegasus XL for verification of hybrid motor. Results showed that hybrid motor replace solid booster if Isp of hybrid motor reaches 330sec. In addition, mission analysis was established for micro air launch system, and parametric design was conducted with design variables: number of port, initial oxidizer flux, and chamber pressure. And the region of Isp was identified by parametric study which satisfied design constraints and mission analysis.

• Membrane and Water Treatment
• /
• v.13 no.6
• /
• pp.291-301
• /
• 2022

In this study, cement/PVDF hollow-fiber hybrid membranes were prepared via a mixed process of diffusion-induced phase separation and hydration. The presence of X-ray diffraction peaks of Ca(OH)₂, an AFt phase, an AFm phase, and C-S-H phase confirmed the hydration reaction. Good hydrophilicity was obtained. The cross-sectional and surface morphologies of the hybrid membranes showed that an asymmetric pore structure was formed. Hydration products comprising parallel plates of Ca(OH)₂, fibrous ettringite AFt, and granulated particles AFm were obtained gradually. For the hybrid membranes cured for different time, the pore-size distribution was similar but the porosity decreased because of blocking of the hydration products. In addition, the water flux decreased with hydration time, and carbon retention was 90% after 5 h of rejection treatment. Almost all the Zn²⁺ ions were adsorbed by the hybrid membrane. The above results proved that the obtained membrane could be alternative as basement membrane for separation application.

• Membrane Journal
• /
• v.17 no.3
• /
• pp.219-232
• /
• 2007

The polyethersulfone(PES)-titanium oxide($TiO_2$) hybrid membranes were prepared by immersion precipitation phase inversion method. The casting solution for the preparation of $PES-TiO_2$ hybrid membrane was provided by adding $TiO_2$ nano particles into the basis polymer solution of 14 wt% and 20 wt% PES/N-methyl-2-pyrrolidone(NMP). The $TiO_2$ loading [wt% ($TiO_2/NMP$)] in eating solution was varied from 0 to 60 wt%. Membrane performance and morphological change of the resulting $PES-TiO_2$ hybrid membranes were discussed in aspect of $TiO_2$ loading, by viscosity, coagulation value and light transmittance of the casting solution, measurement of tensile strength, pore size and contact angle, surface and cross sectional SEM images of the hybrid membrane, and ultrafiltration experiments using the hybrid membrane. According as increase of $TiO_2$ loading in the casting solution, viscosity is increased and coagulation value becomes lower, therefore the thermodynamic instability of the casting solution is increased. It is found that when $TiO_2$ loading is increased, 1) precipitation rate becomes faster while instantaneous demixing is maintained, 2) pure water flux, membrane pore size and compaction stability of the resulting membranes are increased, 3) tensile strength and contact angle are decreased. Dead-end ultrafiltration of bovine serum albumin(BSA) solution using the hybrid membrane shows that membrane performance(flux of BSA solution) enhanced up to 7 times compared with the results obtained using the pure PES membrane(not containing $TiO_2$ particle), due to the increase of hydrophilicity.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.10a
• /
• pp.91-97
• /
• 2001

The thin-layer Navier-Stokes equations are solved for the hypersonic flow over blunt cone configurations with applications to laminar as well as turbulent flows. The equations are expressed in the forms of flux-vector splitting and explicit algorithm. The upwind schemes of Steger-Warming and van Leer are investigated in their ability to accurately predict the heating loads along the surface of the body. A comparison with the second order extensions of these schemes is made and a hybrid scheme incorporating a combination of central differencing and flux-vector-splitting is presented. This scheme is also investigated in its ability to accurately predict heat transfer distributions.

• Journal of computational fluids engineering
• /
• v.11 no.1 s.32
• /
• pp.36-42
• /
• 2006

The existing numerical approximations of convection flux, especially the spatial higher-order difference schemes, in unstructured cell-centered finite volume methods are examined in detail with each other and evaluated with respect to the accuracy through their application to a 2-D benchmark problem. Six higher-order schemes are examined, which include two second-order upwind schemes, two central difference schemes and two hybrid schemes. It is found that the 2nd-order upwind scheme by Mathur and Murthy(1997) and the central difference scheme by Demirdzic and Muzaferija(1995) have more accurate prediction performance than the other higher-order schemes used in unstructured cell-centered finite volume methods.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.207-208
• /
• 2015

팬(fan), 펌프(pump), 블로어(blower), 전기 자동차(electric/hybrid vehicle), 전동차와 같은 다양한 분야에서 3상 전동기의 고속 운전에 대한 요구가 증대되고 있다. 일반적으로 3상 전동기가 정격 속도 이상의 고속에서 운전하기 위해서는 회전자 자속(rotor flux)의 크기를 운전 상황에 따라 감소시키는 약자속(flux weakening) 제어가 필수적이다. 유도 전동기의 회전자 자속 기준 벡터 제어 시의 약자속 운전은 자속 성분 전류의 크기를 제어하여 유도 전동기의 고속 운전을 가능하게 하는데, 이러한 전류 제어 기반의 약자속 제어는 그 구조가 복잡하고, 제어기 이득 선정에 따른 동특성(dynamic)이 영향울 받는 문제점을 가지고 있다. 본 논문에서는 이러한 단점을 개선하기 위한 순시적 약자속 제어 방법을 제안하고 3.7kW 유도 전동기를 이용한 실험을 통하여 제안된 방식의 성능을 검증한다.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2007.10a
• /
• pp.197-199
• /
• 2007

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.8
• /
• pp.717-726
• /
• 2010

For the application into a 1 kWh flywheel energy storage system(FESS), this paper presents the design scheme of radial and axial hybrid magnetic bearings which use bias fluxes generated by permanent magnets. In particular, the axial hybrid magnetic bearing is newly proposed in this paper, in which a permanent magnet is arranged in axial direction so that it can support the rotor weight as well as provide a bias flux for axial magnetic bearing. Such hybrid magnetic bearings consume very low power, compared with conventional electromagnetic bearings. In this paper, to stably support a 140 kg flywheel rotor without contact, design process is explained in detail, and magnetic circuit analysis and three-dimensional finite element analysis are carried out to determine the design parameters and predict the performance of the magnetic bearings.

• Journal of Aquaculture
• /
• v.13 no.4
• /
• pp.353-357
• /
• 2000

Porphyra pseudolinearis and P. dentata from Korea were crossed and the hybrid was cultured at different temperatures (5, 10, 15, 20 or $25^{\circ}C$), photon flux densities (10, 20, 40 or 80${\mu}$mol m$^{-2}$s$^{-1}$) under photoperiods (14L:10D and 10L:14D). In the hybrids, the conchocelis grew faster at 2$0^{\circ}C$ and 40$\mu$mol m$^{-2}$ s$^{-1}$ at $25^{\circ}C$ only, and were abundant, when cultured under 10L:14D. Foliose thalli of the hybrid grew rapidly at conditions of 10-2$0^{\circ}C$, 10L:14D and 15-2$0^{\circ}C$, 14L:10D but slowly at 5 and 2$0^{\circ}C$. No archeospores were observed any tested culture condition. Spermatangial and zygotosporangial sori were formed at the marginal portion o mature thallus. Zygotospores from the hybrid were released at 10-2$0^{\circ}C$ under both photoperiods, and gave rise to form conchocelis filament. Monoecious thalli were observed at 1$0^{\circ}C$ under 14L:10D. Neither monospores nor protothalli were produced from the conchocelis in culture.