• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.71-74
• /
• 2003

Photoconductor for direct detection fiat-panel imager present a great materials challenge, since their requirement include high X-ray absorption, ionization and charge collection, low leakage current and large area deposition, CdTe is practical material. We report studies of detector sensitivity, That is an CdTe with $5{\mu}m$ thickness on glass. That is hybrid layer of depositting ZnS:AgCl phosphor with $100{\mu}m$ on CdTe. The leakage current of hybrid is similar to it of a-Se, but photocurrent is larger than a-Se. Both of them have high spatial resolution, but hybrid has higher sensitivity than a-Se at comparable bias voltage.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.3E
• /
• pp.30-36
• /
• 1999

In this paper, we develop a hybrid speaker recognition system [1] enhanced by pre-recognizer and post-recognizer. The pre-recognizer consists of general speech recognition systems and the post-recognizer is a pitch detection system using adapted continuous wavelet transform (ACWT) to improve the performance of the hybrid speaker recognition system. Two schemes to design ACWT is considered. One is the scheme to search basis library covering the whole band of speech fundamental frequency (speech pitch). The other is the scheme to determine which one is the best basis. Information cost functional is used for the criterion for the latter. ACWT is robust enough to classify the pitch of speech very well, even though the speech signal is badly damaged by environmental noises.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.10
• /
• pp.1-12
• /
• 1993

A multiprocessor system for high-speed processing of hybrid image coding algorithms such as H.261, MPEG, or Digital HDTV is presented in this study. Using a combination of highly parallel 32-bit microprocessor, DCT(Discrete Cosine Transform), and motion detection processor, a new processing module is designed for the implementation of high performance coding system. The sysyem is implemented to allow parallel processing since a single module alone cannot perform hybrid coding algorithms at high speed, and crossbar switch is used to realize various parallel processing architectures by altering interconnections between processing modules within the system.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.371-372
• /
• 2016

In this paper, the encoder of the hybrid type which can use a single position sensor in order to overcome the use of multiple signal lines and the reliability reduction for the location information acquisition caused by using a plurality of position detectors to acquire the position information of the rotor offer. Encoder of the proposed method was the replacement location information generating function by the plurality of sensors to the Capture function of the shape and the microcomputer of the encoder plate. Capture of the DSP function was verified through experiments using the in order to verify the validity of the detection by the proposed method and the hybrid encoder position prototyping, a means.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.433-438
• /
• 2009

In this paper, we propose the robust features extraction method of human by using the skeleton model and hybrid silhouette model. The proposed feature extraction method is divided by hands, shoulder line and elbow region extraction. We use the peer's color information to find the position of hands and propose the circle detection method to extract the shoulder line and elbow. Finally, we show the effectiveness and feasibility of the proposed method through some experiments.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.434-436
• /
• 1992

In this paper, we propose a new multilevel nonlinear filter for simultaneous edge detection and noise suppression, which we call a order statistic-median hybrid(OMH) filler. The median-related filters cause an edge shift in the presence of an impulse near the edge. The proposed filter reduces such edge shifting while suppressing impulsive as well as nonimpulsive noise. We show that at the noisy edge point the OMH filter is substantially superior to the median filter, the $\alpha$-TM filter and the STM filter[I] in two respects: (a) the output bias error and (b) the output mean square error. Test results confirm that the OMH filter is robust in preserving sharp edges, inhibiting edge shifting, and suppressing a wide variety of noise. The structure for the OMH filter integrated circuit is also described.

• Korean Journal of Computational Design and Engineering
• /
• v.3 no.2
• /
• pp.121-126
• /
• 1998

It is one of important issues to find intersection curve? in representation of complex surfaces on a computer. Three typical methods, i.e. the tracing method, the subdivision method, and hybrid method, are often applied to find intersection curves between sculptured surfaces. In this paper two topics are dealt with for efficiency and robustness of the hybrid method. One tropic is about how to determine step sizes variably during tracing, the ethel is about how to find tangential points between surfaces. Tracing by variable step size finds intersections rapidly and requires less memory size. Some illustrations show tangential points between surfaces.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1025-1028
• /
• 1999

After detecting the edge which is applying the morphological operators to the hybrid FCNN, we could analyze and compare. The hybrid FCNN is completely removed to the noise in the image, and worked in order to obtain the result image which is closest to the original image. Also, the morphological operator is applied to the image as the method in order to detect more good the edge than the conventional edge. FCNN which is the pipeline type is completely suitable to detecting the image processing as well as the hardware size. In this paper. we would make the structure elements of the morphological operator the variable template and the static template, and compare with the edge enhancement of two images. After being the result which is applying the variable template morphological operator and the static template morphological operator to the image, we could know that the edge images applying the variable template is superior in a edge enhancement side.

• ETRI Journal
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2007

In this paper, we analyze the performance of double-dwell hybrid initial acquisition in a direct sequence ultra-wideband (DS-UWB) system via detection, miss, false alarm probabilities, and mean acquisition time. In the analysis, we consider the effect of the acquisition sequence as well as the deployment scenario of the abundant multipath components over small coverage of the piconet in the DS-UWB system. Based on the simulation, we obtain various performance measures for the mean acquisition time by varying parameters such as the total number of hypotheses to be searched, subgroup size, and dwell time. We thereupon suggest the optimum parameter set for the initial acquisition in the DS-UWB system.

• Computational Structural Engineering
• /
• v.9 no.2
• /
• pp.163-171
• /
• 1996

A hybrid knowledge model which amalgamates an object-oriented modeling approach and logic programming implementation is presented for structural health monitoring and diagnosis of instrumented structures. Domain knowledge in structural monitoring and diagnosis is formalized and represented in a logic-based object-oriented modeling environment. The model and environment have been implemented and illustrated in the context of a laboratory case study of damage detection in a successively damaged steel structure.