• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.1145-1151
• /
• 2022

A hybrid cutting using both plasma and end mill was developed for safe and efficient dismantling of nuclear facilities. In this cutting method, a moving arc plasma heats up the workpiece before milling. Thermally softened part of the workpiece is then removed quickly and deeply with an end mill. For the cutting experiments, a three-axis numerical control (NC) milling machine was combined with a commercialized arc plasma torch and used to cut 25 mm thick stainless steel plates. Experimental results revealed that pre-heating by arc plasmas can improve the cutting volume per unit time higher than 40% by reducing the cutting load and increasing the cuttable depth when using an end mill without cutting fluids. These advantages of a hybrid cutting process are expected to contribute to quick and safe segmentations of metal structures with radioactively contaminated inner surfaces.

• 한국초지조사료학회지
• /
• 제20권4호
• /
• pp.237-242
• /
• 2000

This study was conducted to investigate the effects of cutting frequency on dry matter yield and nutritive value between heading and headless varieties of sorghumxsudangrass hybrid in 1998. Treatments were var. TE hay grazer(heading type) and Jumbo(headless type) as main plot, and 1, 2, and 3 cutting times per a year as sub plot. Although plant height of sorghumxsudangrass hybrid was no significant difference among treatments, headless type was very slightly higher than that of heading type, and both of variety decreased with 1, 2, and 3 cutting times in order. Also, dry matter yield of sorghum~sudangrass hybrid was no significant difference between heading and headless type. Dry matter yield of first cutting plot in heading type and in headless type was the higher than those of second and third cutting plot. Acid detergent fiber and neutral detergent fiber of headless type were slightly higher than that of heading type. Acid detergent fiber of sorghumxsudangrass hybrid was highest at first cutting plot in both varieties. Neutral detergent fiber of second cutting plot in heading type and first cutting plot in headless type were the highest respectively. In vitro dry matter digestibility of headless type was very slightly higher than that of heading type. And in vitro dry matter digestibility of second cutting plot was the highest in both varieties. In vitro digestible dry matter of sorghumxsudangrass hybrid was no significant difference among treatments. The results demonstrated that although there was not significant difference, cultivation of headless type and first cutting plot per a year were very good for nutritive value and DM yield of sorghumxsudangrass hybrid as summer forage crops in Korea. (Key words : Heading, Headless type, Cutting frequency, Sorghum X Sudangrass Hybrid)

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.344-349
• /
• 2003

The purpose of this study is to ascertain the ability of New type cutter using Hybrid Rocket Propulsion System to cut normal carbon steel and also compound metal like stainless steel which cannot be cut by regular oxygen-acetylene cutter. To compare cutting performance, Two different types of experiment with oxygen-acetylene and Hybrid Combustion cutters were performed. As a result, Hybrid Combustion cutter is used to cut both carbon steel and stainless steel with cutting speed of 400mm/min(carbon steel) and 250mm/min(stainless steel). Otherwise, oxygen-acetylene cutter can be used to cut only carbon steel with cutting speed of 500 $^{\sim}$ 700mm/min. The possibility of Hybrid Combustion cutter as a cutting machine was confirmed.

• 대한치과교정학회지
• /
• 제46권6호
• /
• pp.386-394
• /
• 2016

Objective: The objective of the study was to evaluate the practicality and the validity of different surface treatments of self-drilling orthodontic mini-implants (OMIs) by comparing bone cutting capacity and osseointegration. Methods: Self-drilling OMIs were surface-treated in three ways: Acid etched (Etched), resorbable blasting media (RBM), partially resorbabla balsting media (Hybrid). We compared the bone cutting capacity by measuring insertion depths into artificial bone (polyurethane foam). To compare osseointegration, OMIs were placed in the tibia of 25 rabbits and the removal torque value was measured at 1, 2, 4, and 8 weeks after placement. The specimens were analyzed by optical microscopy, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). Results: The bone cutting capacity of the etched and hybrid group was lower than the machined (control) group, and was most inhibited in the RBM group (p < 0.05). At 4 weeks, the removal torque in the machined group was significantly decreased (p < 0.05), but was increased in the etched group (p < 0.05). In the hybrid group, the removal torque significantly increased at 2 weeks, and was the highest among all measured values at 8 weeks (p < 0.05). The infiltration of bone-like tissue surface was evaluated by SEM, and calcium and phosphorus were detected via EDS only in the hybrid group. Conclusions: Partial RBM surface treatment (hybrid type in this study) produced the most stable self-drilling OMIs, without a corresponding reduction in bone cutting capacity.

• 한국작물학회지
• /
• 제38권5호
• /
• pp.466-476
• /
• 1993

하계청예작물인 수수-수단그라스 잡종 855F, 진주조 수원 6 호, 사료용 피 King millet 를 대상으로 제 2차 예취시기인 9월 17일부터 4일 간격으로 신생엽과 하부 잔존엽의 생장과 광합성을 조사한 결과는 다음과 같다. 1. 예취일로부터 수수-수단그라스, 진주조 신생엽의 엽장, 엽폭, 엽면적, 경당 엽수, 엽건물중, 비엽중은 계속적으로 꾸준한 증가추세를 보여 주었다. 피의 경우 이들과는 달리 하부잔존엽은 예취후 12일 이후로 모두 고사하여 측정이 이루어지지 않았으며 예취후 20일이후 신생엽의 길이는 신장을 중단하였고 엽폭만이 과도하게 신장하는 이상생육 형태를 나타냈다. 2. 예취후 일수 경과에 따른 광합성의 속도 변화는 예취구에서 수수-수단그라스, 진주조, 피의 신생엽이 20일 이후부터는 기존엽에 비해 높게 나타났다. 3. 세 작물의 기공 밀도는 수수-수단그라스 ,진주조가 피 보다 높았으며 기공의 크기와 형태 그리고 엽육세포는 예취후 12일 이후에 완전한 형태를 갖추는 것으로 관찰되었다. 4. 그루터기 기저부의 저장탄수화물 함량은 수수-수단그라스의 경우 예취후 8일까지는 감소하였고, 20일 이후로는 증가하였으나 진주조 및 피는 예취 당일 그루터기내 저장탄수화물 함량이 10%내외로 극히 낮은 상태였고 예취후 20일까지 저장탄수화물 함량은 계속 감소하는 경향이었으며 예취후 32일 경에는 3.0에서 4.0%수준에 이르렀다. 5. 수수-수단그라스, 진주조의 신생염은 제 2차 예취후 12일 이후에 독립적인 생육이 이루어졌다. 이들이 재생특성은 수수-수단그라스는 에너지원으로서 그루터기의 저장탄수화물을 주로 이용하였으나 진주조는 하부 잔존엽의 동화작용에 주로 의존하였고 피는 저장양분의 축적이 빈약하였고 기온 강하에 민감히 반응하여 재생이 억제되었다.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.30-36
• /
• 2013

An FFD(flexible fine die) is an embossed mold that consists of a thin plate ranging from 0.6 to 3 mm in thickness. FFDs are primarily used for cutting LCD films and F-PCB sheets. In the high-speed micro-milling process of flexible fine dies, the lubrication and cooling of the cutting edges is very important from the aspect of eco machining and cutting performance. In this paper, a comparative study of tool wear and surface roughness between cutting fluid and hybrid lubrication for eco-machining of FFD was conducted for processes of high-speed machining of highly hardened material (STC5, HRC52). Especially, the incorporated fluid method for eco machining, in which the cutting performances can be simultaneously measured, was introduced. The machining results show that hybrid lubrication, instead of conventional cutting fluid, leads to excellent tool wear and surface roughness and represents the proper conditions for eco micro-machining of flexible fine dies.

• 한국초지조사료학회지
• /
• 제25권1호
• /
• pp.23-32
• /
• 2005

This experiment was carried out to determine on the growth characteristics, yield and palatability in mono-cropping(T1; sorghum $\times$ sudagrass hybrid, T2; soybean) and inter-cropping[T3; sorghum $\times$ sudagrass hybrid(1) + soybean(2)]. The results obtained are summarizes follows; In plant length. leaf length, leaf width and stem diameter of sorghum $\times$ sudagrass hybrid(SSH). T3(1) was lower than T1 at 1st cutting time. But in 2nd and 3rd cutting time. T3(1) was higher than T1 Stem diameter of T2 was higher than soybean of T3(2). but plant length, leaf length and leaf width of T2 were higher than T3(1). The leaf ratio of SSH in T3(1) was higher than T1 in the first cutting time, but T3(1) was higher than T1 at 2nd and 3rd cutting time. The number of tiller of T1 was higher than SSH of T3(1) at 1st cutting time, but T3(1) was higher than T1 at 2nd and 3rd cutting time. Dead stubble rate of SSH in T3(1) showed a little lower value than T1. Dry matter and fresh yield of T1 was higher than T2 and T3. But protein yield of T3 was higher than T1 The palatability of 1st cutting time was 100.0. 76.8 and $18.5\%$ on T2, T3 and T1, respectively.

• 마이크로전자및패키징학회지
• /
• 제24권1호
• /
• pp.91-101
• /
• 2017

최근 레이저를 이용하여 전자 소자 및 모듈을 절단하기 위한 많은 연구가 진행되고 있다. 본 연구에서는 레이저를 이용하여 LED 모듈을 초고속 절단하기 위한 기초 연구를 수행하였다. 특히 기존의 다이싱(dicing) saw의 절단 속도를 훨씬 능가하는 100 mm/s의 초고속 레이저 절단의 가능성을 검토하였다. 이를 위하여 LED 모듈의 구성 재료인 copper/ceramic 및 silicone/ceramic 이종 복합 기판을 제작하여 레이저 절단 후, 절단면의 표면 특성, 표면조도, 굽힘 강도를 다이싱 saw를 이용하여 절단한 샘플과 비교하였다. 복합 기판에 대한 최적의 레이저 절단 조건을 찾기 위하여, 세라믹 및 구리 단일 기판의 레이저 절단을 통하여 다양한 레이저 공정 조건들에 대한 영향 검토하였다. 절단면의 표면 특성이 가장 좋은 최적의 레이저 절단 조건은 Ar 보조 가스의 사용, 높은 레이저 파워 및 높은 보조 가스의 압력이었다. Copper/ceramic 및 silicone/ceramic 이종 복합 기판에 대하여 레이저 절단과 다이싱 saw로 절단한 기판의 절단면을 비교한 결과, 레이저로 절단된 기판이 다이싱 saw 절단에 비하여 표면이 거칠고 표면 특성이 약간 나쁘다. 레이저 절단면의 평균 표면조도는 약 $9{\mu}m$ 이며, 다이싱 saw로 절단된 절단면의 표면조도는 약 $4{\mu}m$ 이었다. 그러나 다이싱 절단의 절단 속도(3 mm/s)를 고려하면 레이저 절단면의 표면 morphology가 비교적 균일하고, 표면조도도 다이싱 절단의 경우와 큰 차이가 없기 때문에 어느 정도 만족할 만한 결과를 얻었다고 판단된다. 또한 레이저 절단된 기판의 굽힘 강도가 다이싱으로 절단된 기판의 굽힘 강도보다 동등하거나 약간 열세이었다. 그러나 향후 레이저의 절단 조건이 좀 더 최적화된다면 LED 모듈의 초고속 레이저 절단이 가능할 것으로 판단된다.

• 제어로봇시스템학회논문지
• /
• 제8권12호
• /
• pp.1048-1055
• /
• 2002

The problem of generating torch paths for 2D laser cutting of a stock plate nested with a set of free-formed parts is investigated. The objective is to minimize the total length of the torch path starting from a blown depot, then visiting all the given Parts, and retuning back to the depot. A torch Path consists of the depot and Piercing Points each of which is to be specified for cutting a part. The torch path optimization problem is shown to be formulated as an extended version of the standard travelling salesman problem To solve the problem, a hybrid genetic algorithm is proposed. In order to improve the speed of evolution convergence, the algorithm employs a genetic algorithm for global search and a combination of an optimization technique and a genetic algorithm for local optimization. Traditional genetic operators developed for continuous optimization problems are used to effectively deal with the continuous nature of piercing point positions. Computational results are provided to illustrate the validity of the proposed algorithm.

• 한국정밀공학회지
• /
• 제20권5호
• /
• pp.47-56
• /
• 2003

Geometric cutting-simulation and verification play an important role in detecting NC machining errors in mold & die manufacturing and thereby reducing correcting time & cost on the shop floor. Current researches in the area may be categorized into view-based, solid-based, and discrete vector-based methods mainly depending on workpiece models. Each methodology has its own strengths and weaknesses in terms of computing speed, representation accuracy, and its ability of numerical inspection. The paper proposes a hybrid modeling scheme for workpiece representation with z-map model and discrete vector model, which performs 3-axis and 5-axis cutting-simulation via tool swept surface construction by connecting a sequence of silhouette curves.