• Journal of Animal Science and Technology
• /
• v.61 no.6
• /
• pp.340-351
• /
• 2019

Hot environments can affect feed intake and lactation, and the subsequent unavailability of important micronutrients to the newborn piglet can impair piglet growth, reduce the viability of newborn piglets and limit their subsequent performance. This work addresses the effects of hot environments (summer season) upon the reproductive performance of sows during gestation and lactation as well as on the serum levels of vitamins and the concentration of immunoglobulins in their litters in comparison with the winter season. Fourteen sows were evaluated over 100 ± 2 days of gestation in each season. The temperature and humidity index (THI) was used as an indirect measure of heat stress during gestation. The reproductive performance, milk yield, and body condition of the sows were recorded. The concentrations of vitamin E and vitamin A in piglets and in sow serum, colostrum, milk and feed were determined by HPLC; immunoglobulins were assessed by an ELISA. The THI index indicated that animals were subject to heat stress only in during the summer. Although the effect was not significant, there were a lower number of piglets at birth and at weaning and the milk yield in summer compared with winter. There was no difference (p > 0.05) in the body condition of sows between seasons. Season had an effect (p < 0.05) on the vitamin A concentration of postpartum sow serum (0.29 ㎍/mL in winter vs 0.21 ㎍/mL in summer) and on the vitamin E concentration before birth (2.00 ㎍/mL in winter vs 0.90 ㎍/mL in summer). Vitamin E in milk was higher (p < 0.05) in winter than in summer (2.23 vs 1.81 ㎍/mL). Serum levels of vitamins A and E in piglets at birth were lower (p < 0.05) in winter than in summer. The concentrations of immunoglobulins (IgG and IgA) in colostrum and milk were similar between seasons (p > 0.05), but the IgA in piglet serum was higher in winter than in summer (p < 0.05). High temperatures produced heat stress in sows, which affected certain aspects of production that can be translated into economic losses for this sector.

• Korean Chemical Engineering Research
• /
• v.54 no.3
• /
• pp.305-309
• /
• 2016

Recently, there are many efforts focused on development of more economical non-fluorinated membranes for PEMFCs (Proton Exchange Membrane Fuel Cells). In this study, to test the durability of sPEEK MEA (Membrane and Electrode Assembly), ADT (Accelerated Degradation Test) of MEA degradation was done at the condition that membrane and electrode were degraded simultaneously. Before and after degradation, I-V polarization curve, hydrogen crossover, electrochemical surface area, membrane resistance and charge transfer resistance were measured. Although the permeability of hydrogen through sPEEK membrane was low, sPEEK membrane was weaker to radical evolved at low humidity and OCV condition than fluorinated membrane such as Nafion. Performance after MEA degradation for 144 hours and 271 hours were reduced by 15% and 65%, respectively. It was showed that the main cause of rapid decrease of performance after 144 hours was shorting due to Pt/C particles in the pinholes.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.605-612
• /
• 2012

Spalling of concrete occurs due to vapor pressure ignited explosion, temperature difference across a section, and combination of these factors. Factors affecting spalling can be classified into internal and external factors such as material property and environmental condition, respectively, have to be considered to precisely understand spalling behavior. An external environmental factor such as differences in heating rate cause internal humidity cohesion and different vapor pressure behavior. Therefore, spalling property, vapor pressure and thermal strain property were measured from concrete with compressive strengths of 30 MPa, 50 MPa, 70 MPa, 90 MPa, and 110 MPa, applied with ISO-834 standard heating curve of $1^{\circ}C/min$ heating rate. The experimental results showed that spalling occurred when rapid heating condition was applied. Also, when concrete strength was higher, the more cross section loss from spalling occurred. Also, spalling property is influenced by first pressure cancellation effect of thermal expansion caused by vapor pressure and heating rates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.715-721
• /
• 2018

This study examined energy saving and elevating the worker's neuro energy (comfort, concentration, physical, and psychological stability) by compensating for the unpleasant tactile sensation to stimulate auditory and olfactory senses and reduce energy consumption. The experiment was conducted in an environment test room under the test conditions of temperature $25[^{\circ}C]$, relative humidity 50[RH%], illumination 1,000[lux] and air current speed 0.02[m/sec] by stimulating the auditory senses with a 1/f change in rhythm and the olfactory senses with an aroma scent. The experiment utilized the method of EEG, which evaluates human body's psychological status via tactile means, and the method of the vibra image, which evaluates the learning abilities, HRV and human body's psychological status via non-tactile means. The subjects were selected as eight university students (four males and four females) in their 20s, the type that have high relative ${\alpha}$(8~13[Hz]) activation in occipital lobe, which brings the highest level of mind stability and concentration, who had no difficulty in physical activities. The subjects' posture and physical activity was fixed to 1met - when the subjects are seated and relaxing in a comfortable environment - and their clothes condition was standardized as 0.7clo. As a result, the sentimental and psychological stability and concentration were the highest in the multisensory stimulation of jasmine scent and change rhythm of an a=1.106 sound source. In addition, under this condition, the relative $M{\alpha}$ and relative $M{\beta}$ increased by 70.49[%] and 89.72[%], respectively; the HRT decreased by 39.09[%]; and the fatigue and tension/anxiety decreased by 36.85[%] and 15.54[%], respectively.

• Journal of Energy Engineering
• /
• v.16 no.1 s.49
• /
• pp.7-14
• /
• 2007

An experimental study is performed to investigate the effect of air-side heat transfer and friction on characteristics of finned tube heat exchanger under dry surface and wet surface conditions (RH 50%, 70%). Air enthalpy calorimeter is used to obtain the performance evaluation and analysis of a fined tube heat exchanger. Four finned tube heat exchangers with slit fin or plain fin are tested. The number of tube rows are 2 and 3, and the tube diameter is 7 mm. Air-side heat transfer and friction are presented in terms of j factor and friction factor. At dry surface condition, j factor decreases with increasing Re and j factor of 3 row is lower than that of 2 row. Also, the friction factor of a slit fin is larger than that of a plain fin. At wet surface condition, the heat transfer effect is more significant in the case of the slit fin than the plain fin and 2 row than 3 row. The j factor and friction factor are affected by humidity, tube row and fin configuration.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.67-74
• /
• 2013

This research was conducted to investigate the competition for survival between the two cricket species: Gryllus bimaculatus (GB) and Teleogryllus emma (TE). The test insects for this research were bred in the greenhouse of the Ecological Entomology Lab, College of Agriculture and Biosciences, Kyungpook National University, Korea. The feeding environment was $28^{\circ}C$ to $30^{\circ}C$, Long-Day condition (16L : 8D) and Relative Humidity: 50%~60%. The changes of the individual number in two species (TE, GB) were checked every day. This research had three experimental conditions which the ratios of individuals (TE : GB) were set at 1 : 2, 1 : 1 and 2 : 1. The survival rate of GB was net better than that of TE in the result of this study. However, due to the absence of the diapauses period in the egg stage, GB would dominate over TE in the field condition. The appropriate legal measure against GB is recommended.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.149-154
• /
• 2012

The adsorption and desorption behavior of biofilter-medium was investigated on the performance of an adsorption column. Continuous flow-isothermal adsorption experiments were performed to treat waste air containing such a VOC as ethanol under the same condition of > 90% relative humidity as the condition of the feed to a biofilter process. In case of feeding waste air containing ethanol of 1,000 ppmv (or 2,050 mg ethanol/$m^3$) to the adsorption system at the rate of 2 L/min, the onsets of its breakthrough and reaching the state of dynamic equilibrium at the exit had been delayed 10 and 3 times, respectively, later than those at the 1st stage sampling port. Moreover, in case of 2,000 ppmv (or 4,100 mg ethanol/$m^3$), they had been delayed 9 and 3 times, respectively. Thus, regardless of feeding concentration, the ratios of delaying period were observed to be quite consistent each other at the exit of the adsorption column. With regard to the period of desorption, the ratios of delaying period were consistent each other to be 1.5 for both cases. In addition, the effect of microbial activity and sterilization-process was studied on adsorption equilibrium. The ethanol concentration in the vapor phase of vials packed with sterilized granular activated carbon (GAC) was quite consistent to that with unsterilized GAC. However, the ethanol concentrations in the vapor phase of vials packed with unsterilized compost and the unsterilized mixture of GAC and compost were higher than those with sterilized compost and the sterilized mixture of GAC and compost, respectively.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.87-94
• /
• 2015

Plastic artwork can be appeared crack, change of color and whitening event by various environment conditions. A large scale plastic artwork often exhibits in outside it will be directly degraded by physical and chemical degradation factor such as strong sunlight, high humidity and rainfall. We should know degradation characteristic of plastics to prevent these damages. In this study, we studied degradation characteristic of plastics (5 types of wide use plastics; polypropylene, polystyrene, polyethylene, polyvinyl chloride, polyurethane) depending on various artificial degradation conditions such as high temperature, ultraviolet and these complex conditions (high temperature and ultraviolet). As a result, polypropylene, polystyrene and polyethylene show the most visible change especially polypropylene, polystyrene. Polypropylene didn't show a great change degree of tensile strength and contact angle, on the other hand polystyrene did. Polypropylene and polystyrene weakened by photo degradation, polyvinyl chloride and polyurethane had relatively good light stability. Also the high temperature and complex conditions were most degradation characteristic. High temperature worked for degradation catalyst because its energy can not enough worked for cut off binding energy of plastics while ultraviolet condition effected as directly degradation condition. Though following results, we expect it can be applied to investigation of degradation factor depending on plastic artwork materials and basic result of plastic artworks conservation.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.468-477
• /
• 2009

To evaluate the current indoor air quality condition of private academic facilities in Korea and investigate its association with subjective symptoms of student residing at the same academic facilities, air quality monitoring was carried out in total of 20 academic facilities located in Seoul, Daejon and Chungnam from the beginning of January to the end of April, 2009. To assess the air quality condition of academic facilities, 6 air pollutants with temperature and humidity were measured simultaneously inside and outside of academic facilities. The rate of exceeding the Indoor Air Quality (IAQ) guideline concentrations in 6 air pollutants were 5%, 85%, 15%, 5%, 10% and 30% for CO, $CO_2$, PM10, HCHO, TVOCs and TBC, respectively. A questionnaire on 16 subjective symptoms related to indoor air quality was given to 342 students who studied at the 20 academic facilities. The most frequent symptom of students was 'I feel easily tired or sleepy', and this was followed by 'I feel muscular pain or stiffness on shoulder, back and neck'. The association of net difference (subjective symptoms at the academic facility - subjective symptoms of the usual situation) with air pollutants was analyzed using spearman rank correlation. In logistic analysis using proportional odds method, the students whose indoor air concentration of HCHO was ${\geq}60{\mu}g/m^3$ hadsignificant odds of having more subjective symptoms of 'My eyes are dry or feel irritated or itching' (OR=5.026: CI=1.587-15.911), 'I feel easily tired or sleepy' (OR=2.956: CI=1.072-8.152), 'I lose my concentration and I feel my memory is falling' (OR=7.745: CI=1.938-30.955) and 'I feel dizzy' (OR=4.424: CI=1.292-15.149) than those of <$60{\mu}g/m^3$.

• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.530-536
• /
• 2006

Hardwood cutting propagation and early growth characteristics were investigated in order to develop the method of cutting propagation and to find out growth characteristics in the low altitude for in situ and ex situ conservation of Empetrum nigrum var. japonicum K. Koch, which is typical arctic alpine plants on Mt. Halla. The growth of roots and shoots was different depending on hormone concentrations or soil conditions. The survival rate, rooting rate, root growth, number of root and shoot growth increased with treatment of 100 mg/l or 500 mg/l NAA. Consequently, optimum condition of hardwood cutting was at treatment with 100 mg/l or 500 mg/l NAA. When plantlets from hardwood cuttings were exposed to the field condition, after 7 months survival rate was 73.3% without shading while $91.1{\sim}94.4%$ at shading conditions. In the green house, however, survival rate of plantlets were $95.6{\sim}97.8%$ without shading. The growth of plantlets was different depending on sites and shading conditions. Particularly, the best growth was obtained when the plantlets were grown in shading conditions. It indicates that relative humidity and light intensity are correlated with the growth in the low altitude area.