• 한국농공학회지
• /
• 제43권6호
• /
• pp.103-112
• /
• 2001

The development of infrared thermometry has led many researchers to use plant temperatures, and specifically the temperature of the crop canopy in the field, for estimating the water stress of a crop. The purpose of this study was to evaluate the role of leaf temperature in irrigation scheduling. An experiment was carried out in a greenhouse with chinese cabbage. Leaf temperature was measured with infrared thermometry and evapotranspiration of the crop was measured by lysimeters. Influence of the difference between leaf temperature and air temperature on crop evapotranspiration was evaluated under varying water stress condition. A further objective was to evaluate the effect of other climatic variables on the relationship between evapotranspiration and temperature difference between leaf and air. A statistical model for estimating evapotranspiration using the temperature difference, relative humidity. and radiation was developed and tested. Crop water stress index was calculated using vapour pressure deficit and the temperature difference. Relations between the crop water stress index and crop evapotranspiration was tested. The index was closely related with evapotranspiration.

• 수산해양교육연구
• /
• 제20권3호
• /
• pp.508-519
• /
• 2008

Hot air drying is a method that let moistures evaporate by heat exchange between heating air and dry target. This way is dominating more than about 70% of dryers that the use extent is wide fairly, and is established in domestic than dryer that use conduction or radiation etc. Most of research about drying had been emphasized in size of device through analysis for these dry phenomenon plain, heating topology, and aspect of form and so on by dry target's special quality, and research about device development or waste heat withdrawal technology in energy utilization efficiency side is slight real condition. Therefore, in this study, Investigated numerically about thermal efficiency elevation that is leaned against as that change the temperature of inlet and outlet in heat exchanger of the hot air drying tower.

• 한국연초학회지
• /
• 제15권1호
• /
• pp.90-97
• /
• 1993

1. Average moisture content of tobacco in BIB silo was about 19: 1% until 4hours conditioned time, and then moisture variation of tobacco after 2hr conditioned was very small. 2. Application of mathematical model for ordering system. 1) The constant K in the exponential equation varies inversely with both relative humidity and equilibrium moisture. 2) Time needed to order blending tobacco leaves with standard moisture from bulking and blending silo was 4 hours. 3) Reconstituted tobacco sheet had higher moisture absorption ratio than Oriental and Burley tobacco. 4) For minimize of conditioning time in BIB silo, the values of K and Mo given in this study can be used in equation(1) to calculate moisture absorption ratio and optimum conditioning time. 3. Average moisture content and water activity of conditioned tobacco for 4 hours in BIB silo was about 20% and 0.65. In this condition. microbial life will inhibite 4. Physical properties of conditioned tobacco in bulking and blending silo for 4hours was virtually no change.

• 한국작물학회지
• /
• 제46권4호
• /
• pp.325-327
• /
• 2001

Tobacco (Nicotiana tabacum L. cv KF109) seeds were artificially aged in a controlled environment of 45$^{\circ}C$ and 80% relative humidity condition for different duration up to 14 days before priming in polyethylene glycol 6000 solution of equivalent osmotic potential of -0.8 MPa for 8 days at $25^{\circ}C$. The seeds aged only and primed after aging were germinated at 15$^{\circ}C$ and $25^{\circ}C$ to observe the priming effects on the germination of aged seeds at different temperature. The germination percentage of the aged seeds was rapidly dropped starting from 8 days of aging and mean germination time (T$_{50}$) was greatly increased, particularly in germination at 15$^{\circ}C$. The germination capacity was greatly restored in the primed seeds after aging, particularly in the seeds of longer aging and germinating at 15$^{\circ}C$.>.

• 한국대기환경학회지
• /
• 제9권4호
• /
• pp.278-287
• /
• 1993

In order to calssify smog type durnig the summer season in Seoul, air Quality and meterorological data were analyzed by multivariate analysis. Among 15 variables relating to visibility, 10 variables were selected by multiple regression analysis for clustering of smog types; total suspended particle, sulfur dioxide, ozone, ntrogen dioxide, total hydrocarbon, south-north wind component, ralative humidity, precipitable water, mixing height and air temperature. Somg types were grouped into three clusters using cubic clustering criterion and the mumbers of days in each cluster were contained 74, 28 and 16 days. Each cluster was seperated clearly by sulfur dioxide, precipitable water and air teperature. The first cluster was representative of high ozone concentration and prevailing meterological conditions for ozone formation. Therefore, visibility in the first cluster was considered to be affected by photochemical smog. The third cluster showed characteristics of sulphurous smog type due to the higher concentration of primary pollutant, based on the dry condition than that in another cluster. On the other hand, the characteristic of the second cluster was not relatively clear, but considered to be in an intermediate characteristic between photochemical smog and sulphurous smog type.

• Journal of Biosystems Engineering
• /
• 제32권2호
• /
• pp.115-120
• /
• 2007

The adhesive performance of marine mussel extract was compared with that of the commercial medical adhesives for fastening biotissue (SIS) bandages. Joints bonded with mussel extract showed stronger strength than those bonded with other commercial adhesives. The bonding strength was much improved when the moisture in the Joint was reduced using superporous hydrogel regardless of curing time under humid condition ($37^{\circ}C$ and 91% relative humidity). Water inflow into the SIS joint seemed to degrade the performance of mussel extracts adhesive especially for the joints of short period of curing time. The strength of SIS joints coated with surgical sealant was well maintained after being exposed to water inflow.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.89-92
• /
• 2005

Our country has experienced variations in temperature as belong to the area of the continental climate that shows four significant seasons. These occur quality of construction. As the hydration of cement processes, the strength of concrete is developed. In order to improve the quality of concrete, various conditions including temperature and humidity should be maintained appropriately and concrete itself should be cured sufficiently This paper is basic experiment for estimating influence of strength by seasonal mock-up concrete's heat of hydration and estimate relationship of compressive strength development by curing temperature. And show basic document as quality control.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1666-1669
• /
• 1998

In General, Distribution Line is largely effected by temperature, humidity and natural system's condition. The power system network, particularly fault of power distribution system connected to comsumer would cause a magnificent effect to the society. And then Improvement in living conditions and increase in the industrial production brought by the development in economy and new technology, in due course, ask more and reliable electric energy. In this paper, we will describes that the effection of deterioration in Insulator and its relation of fault in power system.

• The Korean Journal of Ecology
• /
• 제14권1호
• /
• pp.9-13
• /
• 1991

The short-horned grasshoppers, Oxya sinuosa Mistshenko, were reared in the growth cabinet exposed alternately to 16 hours of artificial light (510${\pm}$240 lux) and 8 hours of darkness under the condition of constant temperature of 30${\circ}C$ and 65${\pm}$3% in relative humidity. The results obtained in this study are summarized as follows. Both female and male grasshoppers had seven instars. In the larval developmental stages of female and male, the third stage was shorter than the other stages, and the longest stage was the seventh. The total developmental period of females and males were approximately 80.17 and 63.5 days, respectively. The survivorship curve at the temperature of 30${\circ}C$ shows straight line.

• Computers and Concrete
• /
• 제15권2호
• /
• pp.183-198
• /
• 2015

Chloride ingress implies a complex interaction between physical and chemical process, in which heat, moisture and chloride ions transport through concrete cover. Meanwhile, reinforced concrete structure itself undergoes evolution due to variation in temperature, relative humidity and creep effects, which can potentially change the deformation and trigger some micro-cracks in concrete. In addition, all of these process show time-dependent performance with complex interaction between structures and environments. In the present work, a time-dependent behavior of chloride transport in reinforced concrete beam subjected to flexural load is proposed based on the well-known section fiber model. The strain state varies because of stress redistribution caused by the interaction between environment and structure, mainly dominated by thermal stresses and shrinkage stress and creep. Finally, in order to clear the influence of strain state on the chloride diffusivity, experiment test were carried out and a power function used to describe this influence is proposed.