• Membrane Journal
• /
• v.16 no.4
• /
• pp.268-275
• /
• 2006

Novel SILEMs were prepared by multi-stage phase separation process combined by the low temperature phase separation (LTPS) and the high temperature phase separation (HTPS) using room temperature ionic liquids (RTILs) which have a high ionic conductivity. PVDF and imidazolium series ionic liquids were used as membrane material and electrolyte, respectively. To study the ion conducting properties, the SILEMs were tested using LCR meter at temperature controlled from 30 to $130^{\circ}C$. Under humid conditions, with increasing temperature from 30 to $100^{\circ}C$, the ion conductivity of the cast $Nafion^{(R)}$ membrane increased linearly, but then started to decrease after $100^{\circ}C$. However, in the case of the SILEMs, with increasing operating temperature, the ion conductivity increased. Also, the ion conductivity behaviors of the SILEMs were almost same, regardless of humidity. The ion conductivity of the SILEMs was $2.7{\times}10^{-3}S/cm$ and increased almost linearly up to $2.2{\times}10^{-2}S/cm$ with increasing temperature to $130^{\circ}C$. The effects of an inorganic filler on the physical properties of the SILEMs were studied using the $SiO_2$. The addition of $SiO_2$ could improve the mechanical strength of the SILEMs, though the ionic conductivity was decreased slightly.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.59-63
• /
• 2008

Purpose: The purpose of this study is to understand a relation of water content measurement with two different method, water removal method and dry method. Methods: 72 hydrogel contact lens containing various water content (ranged from 47% to 58%) were measured by the gravimetric method at 20$^{\circ}C$and 21% of the humidity. We weighed the dried test specimen at room temperature for 30 min after cooling. Results: In dry blotting method, the water content was measured to 47.43${\pm}$8.48%. The water contents was measured to 48.15${\pm}$8.36% with wet blotting condition. It was found that wet blotting method showed the higher water content of about 7% than dry blotting method. In water content with two dry methods, each of results was measured by 47.89${\pm}$8.06% and 49.56${\pm}$7.06%. In case of microwave method, the water content was measured significantly higher water content of about 1.67% than vacuum oven method. However, no statistical difference was found (p>0.05). Conclusions: In water removal method (Dry blotting method and Wet blotting method) to weigh hydrated test specimen, wet blotting method showed significantly higher water content than dry blotting method. Also in case of dry methods (vacuum oven and microwave) to weigh dry test specimen, water content of microwave method showed higher water content than vacuum oven method, but it should be noted that microwave oven method must be used carefully to measure accurateness on the specimen position and wave power.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.241-248
• /
• 2001

The main factors of breakthrough are known to sampling time, flow rate, concentration of the sample, temperature, humidity, and the physical characteristics of the solid sorbent tube. However, no study has been reported the effect of temperature and sampling volume on the breakthrough of acharcoal tube during vinyl chloride monomer (VCM) sampling. The objective of this study is to suggest the optimal sampling condition during VCM sampling based on National Institute for Occupational Safety and Health (NIOSH) method. To evaluate adequate sampling volume for VCM without breakthrough, volume of 1, 2, 3, 4, and 5 L each from VCM of 1, 5, 10, 15, and 20ppm at flow rate of 0.05 L/min were sampled in $22^{\circ}C$ and $40^{\circ}C$. At $22^{\circ}C$, in the case of 1, 5, 10, and 15ppm, VCM was adsorbed completely in first section of charcoal tube regardless of sampling volume. But in 20ppm, detection rates are 99.56% in first section and 0.44% in second section. At $40^{\circ}C$ of 1ppm, VCM was adsorbed completely in first section. In 10, 15, and 20ppm, detection rates of second, third, and forth sections were decreased significantly by reduction of sampling volume. In determination of breakthrough based on NIOSH method, no breakthrough was occurred in 20ppm at $22^{\circ}C$. At $40^{\circ}C$, breakthrough was occurred in 10, 15, and 20ppm when sampling volume was 5L. Although no breakthrough was occurred when sampling volume was 3L. Finally, in environment of temperature around $22^{\circ}C$, breakthrough may not occurred up to 20ppm during sampling for VCM. During sampling for VCM in environment of temperature around $40^{\circ}C$, no breakthrough occurred in 1-5ppm and 10-20ppm when sampling volume is 5L and 3L respectively. This result suggests that the sampling volume should be considered when VCM sampling under hot conditions (> $22^{\circ}C$) by the NIOSH method No. 1007.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.409-414
• /
• 2010

The first drainage time in a day was controlled for precise irrigation management with low consumption of nutrient solution in tomato perlite bag culture system by measuring water level of drained water in drainage catchment part. This method automatically adjusted the irrigation time under any condition of light, temperature and humidity, resulting in stable water content in substrates. However, it was difficult to keep the time consistent as they were set. It drained with the deviation of 20 min in the treatment in which the first drainage time was set at 10:00 and 50 min in the treatment set at 10:30. The first drainage time was not constant, but the drain occurred stably before noon in the treatment of which irrigation frequency was longer than 30 min. The drainage ratio was better balanced in all the treatments using drainage level sensors than the treatment using time clock for irrigation control. High water and fertilizer efficiencies were obtained. Although the growth, total yield and sugar content were not significantly different between the treatments, fruit weight was higher in the treatments using drainage level sensors than that using timer.

• Applied Chemistry for Engineering
• /
• v.23 no.6
• /
• pp.624-629
• /
• 2012

To capture and recover carbon dioxide ($CO_2$), we impregnated honeycomb made of ceramic paper with $K_2CO_3$ and its absorption characteristics of $CO_2$ were investigated. The absorption amount of $CO_2$ on the honeycomb absorbent impregnated with $K_2CO_3$ was 13.8 wt% at a constant temperature ($70^{\circ}C$) and relative humidity (66%) condition. Because the absorption amount of $CO_2$ achieved almost the same loading ratio of $K_2CO_3$ (17.6 wt%), the absorption reaction of $CO_2$ by $K_2CO_3$ on the honeycomb absorbent seems to be going smoothly. In addition, $CO_2$ absorption breakthrough characteristics of the honeycomb absorbent were analyzed at the temperature range of $50{\sim}80^{\circ}C$, and the water vapor was fed to an absorption column before the feeding of $CO_2$ or simultaneously with $CO_2$. As a result, the absorption capacity of $CO_2$ was more enhanced using the water vapor supplying before $CO_2$ than that of simultaneous supplying. It was confirmed by temperature programmed desorption analysis that the $KHCO_3$ produced by the absorption reaction of $K_2CO_3$ and $CO_2$ is regenerated by the desorption of $CO_2$ at a temperature of about $128^{\circ}C$.

• Korean journal of food and cookery science
• /
• v.2 no.2
• /
• pp.1-7
• /
• 1986

Gulbi were made by salting Yellow corvenia (Pseudosciaena manchurica) with the in three ways: the dry salting method with bay salt, the dry salting method with purified salt or with the abdominal brine injection method with purifie salt. The half of the sample was dried by the control system of temperature and humidity: the other part was dried by the natural condition. In fresh muscle, the content of IMP, hypoxanthine, inosine and AMP were $13.40,\;9.28,\;3.01{\mu}mole/g$ and trace amount, dry basis, respectively. In fresh egg, the content of AMP, hypoxanthine, inosine and IMP were 13.98, 6.56, 1.98 and $1.93{\mu}mole/g$, dry basis, respectively. During the drying process of Yellow corvenia, the content of hypoxanthine increased remarkably, while the content of AMP, IMP and inosine decreased ana remained as trace amount. It can be suggested that the characteristic flavor of Gulbi is not attributed to the nucleotides and their related compounds but rather to free amino acids.

• Journal of Energy Engineering
• /
• v.15 no.4 s.48
• /
• pp.243-249
• /
• 2006

An experimental study on the refrigerant-side pressure drop of slit fin an tube heat exchanger has been carried out. A comparison was made between the predictions of previously proposed empirical correlations and experimental data for the pressure drop on design conditions of condenser in micro-fin tube for R22 and Rl34a. Experiments were carried out under the conditions of inlet refrigerant temperature of $60^{\circ}C$ and mass fluxes varying from $150\;to\;250\;kg/m^{2}s$ for R22 and Rl34a. The inlet air conditions are dry bulb temperature of $35^{\circ}C$, relative humidity of 40% and air velocity varying from 0.68 to 1.43 m/s. Experiments show that pressure drop for R134a was $22{\sim}22.6%$ higher than R22 for the degree of subcooling $5^{\circ}C$ For the mass fluxes of $200{\sim}250\;kg/m^{2}s$, the deviation between the experimental and predicted values for the pressure drop was less than ${\pm}20%$ for R22 and Rl34a.

• Current Research on Agriculture and Life Sciences
• /
• v.2
• /
• pp.15-22
• /
• 1984

This study was conducted to identify the enzyme treatment time, enzyme concentration and plant growth condition for isolation of potato mesopyll, it was also performed to determine the adquate sucrose molarity on purification of protoplasts and to investigate the incubation time, PEG concentration and DMSO effect for potato-petunia protoplast fusion. The results were summarized as follows: The optimal time of incubation in enzyme solution was 3 - 4 hours and high humidity and low light intensity made plants more effective to protoplast releasing enzymes. Our experimental results showed that the pectolyase Y-23 was an ideal agent for isolation from mesophyll cultured in vitro compared with macerozyme. The enzyme solution with 0.5 % macerozyme and 2 % cellulase was very effective and the purity of healthy protoplast was better in 0.4 and 0.5 M sucrose than in others. It was revealed that the rate of potato-petunia fusion according to the incubation time with PEG was effective at 30 min incubation and percentage of protoplast aggregation was increased by high molecular weight and concentration of PEG. Percentage of potato-petunia protoplast heteroplasmic aggregation was increased by 4 to 16 % in PEG 6000 compared with PEG 4000 and PEG 1500. Addition of 5 to 10 % DMSO to the PEG solution increased to the heteroplasmic aggregation of potato-petunia from 2 to 4 %.

• Preventive Nutrition and Food Science
• /
• v.1 no.1
• /
• pp.99-105
• /
• 1996

Effects of conjugated linoleic acid(CLA), known as an effective anticarcinogen in several aminal models, on the egg production and egg weight of laying hens, and the weight gains of broilers were investigated. CLA was synthesized from corn oil by the alkaline isomerization method and purified by the low-temperature precipitation method. Diets for laying hens and for broilers were synthesized to meet the specification of their NRC standard rationals. Two separated experiments(Experiment I and II) were conducted for laying hens. in experiment I, 45 hens(300 days of age) were divided into 15 hens per treatment group; each hen was housed in wired cage located in a temperature and humidity-controlled house and adopted to the control diet. One week later, each group was subjected to one the four treatment groups for 5 weeks : control, 1.0% CLA, 2.5% CLA and 5.0% CLA diets. Diet and water were ad libitum. The condition of experiment II was the same as that of experiment I except for the addition of 5% corn oil diet and the extension of feeding period to 7 weeks. Egg production, egg weight and feed intake were recorded every week. Forty-five broilers(10day of age) were adopted to the control diet for a week and then switched to the treatment diets for 5 weeks : control, 1.0% CLA, 2.5% CLA, 5% CLA and 5% corn oil, Body weight and feed intake of broilers were measured every week. Diets supplemented with various amounts of CLA enhanced the egg production and increased the egg weight regardless laying hen's age(150 days or 300 days) as compared to control diet. The most effective diet for the egg production and egg weight of young hens(150 days of age) was found to be 1.0% CLA diet, but relatively higher CLA diet(2.5% CLA) was required for old hens (300 day of age) to obtain similar results as seen in younger hens. All hens treated with CLA ate greater amount of feed than control hens. Broilers treated with various amount of CLA ate less feed as compared to control ones, but the body weight gain was greater than the control broilers. These results indicate that CLA enhanced the egg production and agg weight of laying hens, and increased the body weight gain of broilers with less diet consumption.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.362-368
• /
• 1998

The magnetic properties, thermal stability and anti-corrosion properties of $Cr_86Al_14$ spin valves multilayers were studied. It was found that the magnetic properties of $Cr_86Al_14$ spin valves depend on the thickness of antiferromagnetic, ferromagnetic and non-ferromagnetic layers. Exchange coupled field ($H_{ex}$) and magnetoresistance ratio (%) showed the largest value of 20 Oe, 2 % in $glass/Cr_{86}Al_{14}(600 $\AA$)/Ni_{81}Fe_{19}(50$\AA$)/Cu(40 $\AA$)/Ni_{81}Fe_{19}(40 $\AA$)$ spin valves. The $H_{ex}$ MR ratios (%) of CrAl and FeMn spin valves were decreased with increasing annealing temperatures and were lost at 150 $^{\circ}C$, 250 $^{\circ}C$ respectively. Based on these result, it was elucidated that CrAl is more thermally stable than FeMn. It was also shown that there was no change of $H_{ex}$ MR ratios in CrAl, while FeMn was changed and lost 15 days later in corrosion resistance test under 35 $^{\circ}C$, 90 % humidity condition. FeMn was found to be pitted and peeled off 15 days later by SEM micrographic analysis.