• Journal of Engineering Education Research
• /
• v.19 no.1
• /
• pp.31-36
• /
• 2016

These days, ICT-related products are pouring out due to development of mobile technology and increase of smart phones. Among the ICT-related products, wearable devices are being spotlighted with the advent of hyper-connected society. In this paper, a body-attached type wearable device using EMG(electromyography) sensors is studied. The research field of EMG sensors is divided into two parts. One is medical area and another is control device area. This study corresponds to the latter that is a method of transmitting user's manipulation intention to robots, games or computers through the measurement of EMG. We used commercial device MYO developed by Thalmic Labs in Canada and matched up EMG of arm muscles with gesture controller. In the experiment part, first of all, various arm motions for controlling devices are defined. Finally, we drew several distinguishing kinds of motions through analysis of the EMG signals and substituted a joystick with the motions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.454-454
• /
• 2011

Graphene shows unusual electronic properties, such as carrier mobility as high as 10,000 $cm^2$/Vs at room temperature and quantum electronic transport, due to its electronic structure. Carrier mobility of graphene is ten times higher than that of Silicon device. On the one hand, quantum mechanical studies have continued on graphene. One of them is quantum Hall effect which is observed in graphene when high magnetic field is applied under low temperature. This is why two dimension electron gases can be formed on Graphene surface. Moreover, quantum Hall effect can be observed in room temperature under high magnetic field and shows fractional quantization values. Quantum Hall effect is important because quantized Hall resistances always have fundamental value of h/$e^2$ ~ 25,812 Ohm and it can confirm the quantum mechanical behaviors. The value of the quantized Hall resistance is extremely stable and reproducible. Therefore, it can be used for SI unit. We study to measure quantum Hall effect in CVD graphene. Graphene devices are made by using conventional E-beam lithography and RIE. We measure quantum Hall effect under high magnetic field at low temperature by using He4 gas closed loop cryostat.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.9
• /
• pp.757-763
• /
• 2002

A newly designed haptic interface enables an operator to control a remote robot precisely. It transmits position information to the remote robot and feeds back the interaction force from it. A control algorithm of haptic interface has been studied to improve the robustness and stability to uncertain dynamic environments with a proposed contact dynamic model that incorporates human hand dynamics. A simplified hybrid parallel robot dynamic model fur a 6 DOF haptic device was proposed to from a real time control system, which does not include nonlinear components. LQC/LTR scheme was adopted in this paper for the compensation of un-modeled dynamics. The recovery of the farce from the remote robot at the haptic interface was demonstrated through the experiments.

• ETRI Journal
• /
• v.37 no.4
• /
• pp.793-803
• /
• 2015

We propose a novel HMI UI/UX for an in-vehicle infotainment system. Our proposed HMI UI comprises multimodal interfaces that allow a driver to safely and intuitively manipulate an infotainment system while driving. Our analysis of a touchscreen interface-based HMI UI/UX reveals that a driver's use of such an interface while driving can cause the driver to be seriously distracted. Our proposed HMI UI/UX is a novel manipulation mechanism for a vehicle infotainment service. It consists of several interfaces that incorporate a variety of modalities, such as speech recognition, a manipulating device, and hand gesture recognition. In addition, we provide an HMI UI framework designed to be manipulated using a simple method based on four directions and one selection motion. Extensive quantitative and qualitative in-vehicle experiments demonstrate that the proposed HMI UI/UX is an efficient mechanism through which to manipulate an infotainment system while driving.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.156-164
• /
• 1998

IMS is a more advanced manufacturing system than FMS. However, IMS do not have sufficient performance for the work in the various and uncertain environment, because of the difficulty of the work and occurrence of the unexpected condition. If IMS is hard to work properly, teleoperation system can support it by using the human's consideration and judgment. The master mechanism is a basic component of the teleoperation system and the development of the useful one is important for efficiency of the work. A master mechanism of exoskeleton type can increase the work efficiency, mobility and harmony between a working robot and an operator. This paper describes an arm-harness of exoskeleton type, which is able to drive a robot according to judgment. This device is applied to a robot system for evaluating the system performance through the experiment.

• The Journal of Korea Robotics Society
• /
• v.1 no.1
• /
• pp.89-101
• /
• 2006

Tactile sensation is one of the most important sensory functions for human perception of objects. Recently, there have been many technical challenges in the field of tactile display as well as tactile sensing. In this paper, we propose an innovative tactile display device based on soft actuator technology with ElectroActive Polymer(EAP). This device offers advantageous features over existing devices with respect to intrinsic flexibility, softness, ease of fabrication and miniaturization, high power density, and cost effectiveness. In particular, it can be adapted to various geometric configurations because it possesses structural flexibility, so it can be worn on any part of the human body such as finger, palm, and arm etc. It can be extensively applied as a wearable tactile display, a Braille device for the visually disabled, and a human interface in the future. A new design of the flexible actuator is proposed and its basic operational principles are discussed. In addition, a wearable tactile display device with $4{\times}5$ actuator array(20 actuator cells) is developed and its effectiveness is confirmed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2235-2239
• /
• 2003

The aim of this research is to study and develop enabling technologies for home healthcare device with ubiquitous network. The motivation of this paper is to enable healthcare in home, to development the device for smart home health care. To achieve the aim, we must develop the prototype platform based on home gateways, distributed context user interface based on UPnP and support for information sharing with high speed power line communication and mobile infra-structures. And IPv6 is the base technology of this platform. In this paper, we concern that physical health, mental health and medical emergencies is all of home healthcare. With the smart device, we evaluate the connectivity, automatic information extraction and private data exchange and event driven message. The result of this paper is demonstration of smart device for ubiquitous communication in a healthcare application such as patient monitoring device and several information services. In conclusion, home healthcare will support more healthy and easy living for a human.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.276-284
• /
• 2009

In this paper, we develop the image transfer remote maintenance monitoring system for hand held device which can compensate defects of human mistake. The human mistakes always happen when the worker communicate information each other to check and maintenance the equipment of the power plant under bad circumstance such as small place and long distance in power plant. A worker couldn't converse with other when in noisy place like Power plant. So, we make some hand device for handy size and able to converse in noisy place. The developed system can have improvement of productivity through increasing plant operation time. And developed system is composed of advanced H/W(hard ware) system and S/W(soft ware)system. The H/W system consist of media server unit, communication equipment with hand held device, portable camera, mike and head set. The advanced s/w system consist of data base system, client pc(personal computer) real time monitoring system which has server GUI(graphic user interface) program, wireless monitoring program and wire ethernet communication program. The client GUI program is composed of total solution program as pc camera program, and phonetic conversation program etc.. We analyzed the required items and investigated applicable part in the image transfer remote maintenance monitoring system with hand held device. Also we investigated linkage of communication protocol for developed prototype, developed software tool of two-way communication and realtime recording skill of voice with image. We confirmed the efficiency by the field test in preventive maintenance of plant power.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06b
• /
• pp.67-72
• /
• 1998

The paper aims to present a new human-scale haptic advice for virtual environment named Scaleable-SPIDAR (Space Interface Device for Artificial Reality), which can provides different aspects of force feedback sensations, associated mainly with weight, contact and inertia, to both hands within a cave-like space. Tensioned string techniques are used to generate such haptic sensations, while keeping the space transparent and unbulky. The device is scaleable so as to enclose different cave-like working spaces. Scaleable-SPIDAR is coupled with a large screen where a computer generated virtual world is displayed. The used approach is shown to be simple, safe ad sufficiently accurate for human-scale virtual environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.899-903
• /
• 2017

In this paper, it is shown the in-vehicle network architecture and implementation for multimedia service which supports Human machine interface of multi-passengers. For multi-passengers' vehicle, it has to be considered the factor of network traffic, simultaneously data transferring to multi users and accessibility to use variety of media contents for passengers compared to conventional in-vehicle network architecture system Therefore, it is proposed the change of network architecture compared with general MOST network, implementation of designed software module which can be interoperable between ethernet and MOST network and accessible interface that passenger can be plugged into MOST network platform using their device based on ethernet network system.