• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.4
• /
• pp.15-24
• /
• 2014

Low Cost Carrier(LCC)s in Asia Pacific market are expected to record high growth due to the expansion of Open Sky Policy among Korea, Japan, China and South East Asia. As everybody is aware of, LCC is not only saving flight cost but also creates differentiating business model by reducing unnecessary services such as F&B and in-flight duty free sales services. Booming LCCs in Asian market will cause not only Incheon airport but also other local airports in Korea to compete heavily to attract LCCs. For example, Air Asia Group with more than 200 fleet has expanded its alliance network throughout Asia. Therefore this paper has researched a new business model operating a LCC terminal for the hub airport competitiveness. According to analysis result of case study, it was found out, considering increasing airline demand next decade, Incheon airport and other domestic airports in Korea had better change an existing terminal into a LCC Terminal(LCCT) to differentiate airport services and expand its hub network. That is because of economic feasibility, first of all, of securing hub and spoke networking capabilities with airlines and finally of developing commercial facilities customizing LCC passengers' demand.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.238-241
• /
• 2008

A brake system in automobile is one of the important parts that directly affect the safety of passengers. Particularly, disk brake module is applied to almost all kinds of automobile brake system due to its remarkable braking power and braking distance. In the disk brake module of an automobile, the bolt for tire wheel is assembled to the disk brake hub by interference fit (bolt pressing process). The process induces small deformation whose range is within tens of ${\mu}m$ and this deformation may cause the runout badness of the whole disk brake module, and even braking problems such as judder or squeal phenomena which makes the loss of braking efficiency. In this study, bolt pressing fit into hub was simulated by $ANSYS^{TM}$, a commercial structure analysis program. Also, the aspect and the cause of hub displacement were analyzed and the solution for decreasing runout of hub was proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.769-772
• /
• 2005

This paper deals with the aspects of die design for the multistage fine tooth hub gear in the cold forging process. In order to manufacture the cold forged product fur the precision hub gear used as the ARD 370 system of bicycle, it examines the influences of different designs on the metal flow through experiments and FE-simulation. To find the combination of design parameters which minimize the damage value, the low gear length, upper gear length and inner diameter as design parameters are considered. An orthogonal fraction factorial experiment is employed to study the influence of each parameter on the objective function or characteristics. The optimal punch shape of fine tooth hub gear is designed using the results of FE-simulation and the artificial neural network. To verify the optimal punch shape, the experiments of the cold forging of the hub gear are executed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.187-205
• /
• 2014

The global price of oil, which is both finite and limited in quantity, has been rising steadily because of the increasing requirements for energy in both developing and developed countries. Furthermore, regulations have been strengthened across all industries to address global warming. Many studies of hull resistance, propulsion and operation of ships have been performed to reduce fuel consumption and emissions. This study examined the design parameters of the propeller boss cap fin (PBCF) and hub cap for 6,000TEU container ships to improve the propulsion efficiency. The design parameters of PBCF have been selected based on the geometrical shape. Computational fluid dynamics (CFD) analysis with a propeller open water (POW) test was performed to check the validity of CFD analysis. The design of experiment (DOE) case was selected as a full factorial design, and the experiment was analyzed by POW and CFD analysis. Analysis of variance (ANOVA) was performed to determine the correlation among design parameters. Four design alternatives of PBCF were selected from the DOE. The shape of a propeller hub cap was selected as a divergent shape, and the divergent angle was determined by the DOE. Four design alternatives of PBCF were attached to the divergent hub cap, and the POW was estimated by CFD. As a result, the divergent hub cap with PBCF has a negative effect on the POW, which is induced by an increase in torque coefficient. A POW test and cavitation test were performed with a divergent hub cap with PBCF to verify the CFD result. The POW test result showed that the open water efficiency was increased approximately 2% with a divergent hub cap compared to a normal cap. The POW test result was similar to the CFD result, and the divergent hub cap with the PBCF models showed lower open water efficiency. This was attributed to an increase in the torque coefficient just like the CFD results. A cavitation test was performed using the 2 models selected. The test result showed that the hub vortex is increased downstream of the propeller.

• The Journal of the Korea Contents Association
• /
• v.14 no.1
• /
• pp.537-547
• /
• 2014

In this paper, the ALT (ALTernative) board and a NetLogo extension module are developed for the active participatory simulation (APS) learning. Through the participatory simulation with HubNet each student can attend the experiment as one of clients. Only one HubNet server, however, is able to use an external device so that the bifocal modeling based learning with multiple users is impossible. In order to overcome the drawback, and enable clients participate into the experiment and collect the experimental data and the measured data, an ATmega 32 based board and its firmware are developed. In addition, Java extension module based on TCP/IP socket interfaces is developed to exchange the data with HubNet server. Finally, we show some NetLogo program examples to use the developed hardware and software for APS and seek the way to use them for science education.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.74-81
• /
• 2008

Protein interaction network contains a small number of highly connected protein, denoted hub and many destitutely connected proteins. Recently, several studies described that a hub protein is more likely to be essential than a non-hub protein. This phenomenon called as a centrality-lethality rule. This nile is widely credited to exhibit the importance of hub proteins in the complex network and the significance of network architecture as well. To confirm whether the rule is accurate, we Investigated all protein interaction DBs of yeast in the public sites such as Uetz, Ito, MIPS, DIP, SGB, and BioGRID. Interestingly, the protein network shows that the rule is correct in lower scale DBs (e.g., Uetz, Ito, and DIP) but is not correct in higher scale DBs (e.g., SGD and BioGRID). We are now analyzing the features of networks obtained from the SGD and BioGRD and comparing those of network from the DIP.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.8 s.239
• /
• pp.948-955
• /
• 2005

A three-dimensional computation was conducted to understand effects of the inlet boundary layer thickness on the internal flow in a low-speed axial compressor operating at the design condition($\phi=85\%$) and near stall condition($\phi=65\%$). At the design condition, the flows in the axial compressor show, independent of the inlet boundary layer thickness, similar characteristics such as the pressure distribution, size of the hub comer-stall, tip leakage flow trajectory, limiting streamlines on the blade suction surface, etc. However, as the load is increased, the hub corner-stall grows to make a large separation region at the junction of the hub and suction surface for the inlet condition with thick boundary layers at the hub and casing. Moreover, the tip leakage flow is more vortical than that observed in case of the thin inlet boundary layer and has the critical point where the trajectory of the tip leakage flow is abruptly turned into the downstream. For the inlet condition with thin boundary layers, the hub corner-stall is diminished so it is indistinguishable from the wake. The tip leakage flow leans to the leading edge more than at the design condition but has no critical point. In addition to these, the severe reverse flow, induced by both boundary layer on the blade surface and the tip leakage flow, can be found to act as the blockage of flows near the casing, resulting in heavy loss.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.167-177
• /
• 2004

The Hub-and-spoke strategy is widely used in the field of transportation. According to containerization and the development of transshipment technology, it is also introduced into European rail freight transportation. The objective of this article is to develop a service network design model for rail freight transportation based on the Hub-and-spoke strategy and efficient algorithms that can be applied to large-scale network. Although this model is for strategic decision, it includes not only general operational cost but also time-delay cost. The non-linearity of objective function due to time-delay factor is transformed into linearity by establishing train service variables by frequency. To solve large scale problem, this model used a heuristic method based on decomposition and three newly-developed algorithms. The new algorithms were examined with respect to four test problems base on the actual network of European rail freight and discussed the accuracy of solutions and the efficiency of proposed algorithms.

• Journal of Korea Port Economic Association
• /
• v.25 no.1
• /
• pp.271-292
• /
• 2009

Opening and regional economic integration are characteristic of global economic trends that have been made since the 1990s. Accordingly, all economic blocs of the world are largely reorganized into three poles, European Economic Bloc, American Economic Bloc and Northeast Asian Economic Block which are respectively led by EU, the United States and the rapidly emerging economic power, China. Considering this direction of global economy, the current status of Northeast Asia, China's unprecedentedly enormous port development project and Japan's introduction of an epoch-making port policy towards the restoration of its port competitiveness, Korea is urgently need to take its own initiatives and positive actions that can cope with the above situations. The purpose of this study is to propose ways of strategic cooperation for Korea-Japan joint development. For the purpose, this researcher provides the concept and preconditions of hub-port, investigates hub-port development strategies of rival companies in Northeast Asia and discusses the potential of the development of the Korea-Japan Strait Economic Zone which is located between Busan port and Japan's Honshu(Simonoseki port) and Kyushu(Kitakyushu port).

• Journal of the Korea Convergence Society
• /
• v.13 no.1
• /
• pp.489-498
• /
• 2022

This study was conducted to identify factors that affect the job satisfaction of nurses at local hub hospital in the COVID-19 situation. Data were collected from 230 nurses working at 4 local hub hospital in C-do through a questionnaire. Using SPSS/WIN statistics 25.0, the data was analyzed by t-test, ANOVA, Pearson Correlation, and Multiple Linear Regression. Factors that were significant to the job satisfaction of nurses at local hub hospital were self-efficacy(t=3.003, p=.003), G local hub hospital(t=2.739, p=.007), and job burden(t=-4.291, p<.001) which showed 44.1% of the explanation. In conclusion, in order to increase job satisfaction of nurses at local hub hospitals in the COVID-19 situation, it is necessary to develop a convergence program that improves self-efficacy, and policy support is needed to lower the job burden.