• Land and Housing Review
• /
• v.14 no.2
• /
• pp.35-50
• /
• 2023

The purpose of this study is to identify areas in need of urban renewal by utilizing spatial data and analyzing their types and characteristics. For this, this research employed a kernel density function and K-means cluster analysis with spatial data, through which it sought ways to identify high-demand areas for urban renewal projects. The key findings and implications of the research are summarized as follows. Firstly, this research classified 587 target sites in Seoul based on development density (ratios) and an indicator for aged buildings. Approximately half of these areas were consistent with leading pilot project sites and Accelerated Integration Sites. Secondly, it was observed that residential environments in the designated leading pilot project sites, as decided by public sectors, were relatively poor compared to other areas. Lastly, the target areas for urban renewal were not clearly categorized through statistical analysis. Instead, it was found that categorization should be made depending on the requirements of each project.

• Transactions of Materials Processing
• /
• v.21 no.3
• /
• pp.195-201
• /
• 2012

A vacuum ladling die casting system is suggested as a means to obtain a high vacuum level. A high vacuum of 17.8 mmHg is obtained by sealing the inner space of the mould. The sample product is a rear-head housing for an auto-compressor, and the die-casting with 6-cavities was conducted. The flow analysis shows that the filling speed during vacuum ladling is faster than for a non-vacuum system. The air holes in the sample product were too small to be seen with the naked eye in X-ray films. Density tests show that the high vacuum ladling system reduces the internal porosity as much as 57.8% when compared to the non-vacuum system. A defective rate of only 0.17% was found from leak testing. The results of this research prove that the high vacuum die-casting process is useful for manufacturing of aluminium components under high internal pressure.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2003.11a
• /
• pp.109-114
• /
• 2003

Fast economic growth resulted in fast industrialization and metropolitanization. At that time, housing was supplied in large quantity, and the apartment became a dominant type of housing in Korea It is partly due to the high population density. But, large quantity supply of apartments caused a lot of problems. One of the biggest problems is decomposition of traditional communities. As interest about quality of life grows since the 90's, the recovery of communities is getting an import assignment that should be solved. Architects investigate ways of arrangement and community facilities planning. off-line Communities might be substituted by or supported with cyber communities through the use of IT technology. The construction of cyber apartment is getting popular by the governmental incentive in 1999. At first, the infrastructure has been constructed, and then the current emphasis in on forming the information community to provide various service.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.4
• /
• pp.32-41
• /
• 2012

In recent times, multi-centralization and decentralization as well as large Capital area and suburbanization in the spatial structure of capital area. With rapid growth, urbanization and industrialization are unsystematic, and growth inequality between regions caused negative effects such as discordant centralization and decentralization, fluctuating land value, and gap between living conditions. Accordingly, this study analyzed urban spatial indexes by the self-governed body in the capital area such as Seoul, Incheon, and Gyeonggi province for the analysis of the regional inequality phenomenon. We examined the characteristics of temporal and spatial changes in urban spatial structure in the capital area by utilizing the distribution pattern and density of city indexes such as population, employment, etc, and then drew the commonality of those factors through factor analysis. We evaluated the drawn results through the city standard index by each city, conducted factor score analysis, and identified the interaction between each factor and Housing Purchase Price Composite Indices index, housing rent price index(Housing Jeonse Price Composite Indices), land price fluctuation rate, diffusion ratio of house, and financial independence.

• Korean Journal of Poultry Science
• /
• v.36 no.1
• /
• pp.1-7
• /
• 2009

This study was performed to evaluate the effect of the level of stocking density of housing with or without window on chicken meat quality. The incidence of $1^+$ grade of whole chicken housed with window significantly influenced by stocking density. The incidence of $1^+$ grade chicken at high stocking density ($0.050\;m^2$/head), standard stocking density ($0.066\;m^2$/head), and low stocking density ($0.083\;m^2$/head) was 26, 52, and 66%, respectively. Breast muscle of chicken housed with window and with low stocking density showed higher incidence of $1^+$ grade than high stocking density. Also minor and severe PSE (pale, soft, extractive) incidence of chicken meat were showed 4% each, while the $1^+$ grade chicken was not appeared at low density. In chicken thigh, the incidence rate was not affected by stocking density. In chicken housed without window, the incidence of $1^+$ grade chicken in high, standard, and low stocking density was 18, 8, and 46%, respectively. Also, the incidence of $1^+$ grade chicken breast was 2.6 times higher than the chicken in low stocking density. However, incidence of $1^+$ grade thigh was not affected by the stocking density. These results suggest that high stocking density significantly reduced the incidence of $1^+$ grade chicken meat regardless of housing with or without window.

• Environmental Engineering Research
• /
• v.16 no.1
• /
• pp.29-34
• /
• 2011

The electric charge on a membrane was investigated by analyzing the experimental rejection of various monovalent and divalent ionic solutes. The characteristics of the separation of ionic solutes using various nanofiltration membranes were obtained from an experimental nanofiltration set-up, with a surface area of $40cm^2$ under the operational pressures between 0.25-0.3 MPa. The state of the membrane electric charge was observed using separation coefficients, i.e., the permeation ratio of monovalent to divalent ions. To confirm the state of the membrane charge observed via the separation coefficient, a calculation using the extended Nernst-Planck equation, coupled with the Donnan equilibrium, assuming different electric charge states of the membrane, was compared with the experimental rejection of ionic solutes. The examination of the characteristics of separation using three types of nanofiltration membranes showed that one of the membranes carried a negative/positive double charge density inside, while other two membranes carried either a positive or negative charge density.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.655-659
• /
• 2001

Resident time of the continuous and Instantaneous centrifugal separator using that separates the light and heavy liquids by use of density difference is the orptical factor that affects significantly the chemical metial extraction and the productivity in the chemical and mechanical process. In this paper, the overflow of the device is investigated under consideration of the relationships between inclination angle of liquid feeding screw and the centrifugal force. From the design of the length of a centrifugal separator, the radiuses of rotor and housing, theoretical formulation on the contact radius of separation weir is established through the experiments. From the experiments, it is identified that how much the capacity of inlet impeller and the emulsion phenomenon depend on the screw angle of inlet impeller. Also, we investigate the separation condition and the resident times that are functions of the phase ratio and density.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.1
• /
• pp.89-99
• /
• 2020

This study was conducted as a basic research to create a sound and vital ecological environment in the city compared to the appearance characteristics of Gap stream(G-stream), which are the main stream of Banseok stream(B-stream), by analyzing the characteristics of waterbirds, including Wild Spot-billed Duck (S-Duck), that live in B-stream built as ecological stream. The waterbird survey was conducted by the line census for 3.2km, Jukdong-bridge to Jamiseon-bridge, from January to August 2018. The analysis of the survey was conducted with Relative species density(RD) of the emerging waterbird species, the Species diversity and Density Per Unit area for 100㎡(DPU). The waterbird survey results of B-stream was conducted 65 times. The five types of water birds that appeared during the survey were Spot-billed Duck(Anas poecilorhyncha), Teal(Anas crecca), Little Egret(Egretta garzetta), Great Egret(Egretta alba), and Grey Heron(Ardea cinerea). As a result, for S-Duck at B-stream, RD was 89.9%, monthly species diversity was simple as 0.3801 in January, 0.5943 in February and 0.3501 in August. The DPU of the S-Duck was 0.165/100㎡ in the B-Stream survey section which was 4.9 times higher than the main stream section, G-stream. The non-freezing zone of the city's small stream is expected to play an important role as a winter stop for wild birds such as S-Duck during the freezing period of the huge stream. For this reason, considering the ecological characteristics of wild waterbirds such as S-Duck when creating ecological stream, a: space and linear selection of waterways which can minimize the impact of natural enemy and increasing the number of walkers, b: management water-friendly plants in the low flow channel, c: arrangement walking-bicycle road will be necessary.

• Journal of the Korean housing association
• /
• v.20 no.6
• /
• pp.89-99
• /
• 2009

The purpose of this research is to determine the deterioration characteristics of high-rise and high-density apartment complexes in 1st period new towns in order to regenerate apartments as sustainable residential environments in Korea. For this purpose, the level of deterioration was evaluated by using 'evaluating indicators of the level of deterioration of high-rise and high-density apartments'. The deterioration characteristics were determined inclusively and concretely based on evaluation results. In addition, the deterioration level according to residents' awareness of the deterioration of their apartment was evaluated. This study was conducted by methods of field data collection, staff interview, field measurement, and resident survey according to the measurement of the evaluating indicators. And the re-organized questionnaire based on the evaluating indicators was utilized for a survey of resident's awareness. The results are as follows: In the physical dimensions of apartments, the deterioration characteristics included deteriorated equipment and a decline in structural performance due to the aging of the apartment, a shortage of parking spaces, and the low flexibility of the bearing wall structure, etc. In terms of the social dimensions, the apartments showed an increase in the number of elderly households, a shortage of community facilities, and a lack of the opportunity for community participation etc. In terms of the economic dimensions, the apartments showed limitations in maintenance & repair and a lack of environmentally friendly features.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.820-824
• /
• 2008

Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, the electret filter is made by electrospinning process using Polystyrene which is dissolved by 5 : 5 of Tetrahydrofuran (THF) and Dimethylformamide (DMF). Also the electrical properties and the filtration performances of electrospun filter media are Quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. The surface charge potential and the surface charge density of electrospun PS filters are increased with increasing applied voltage and saturated at 30 kV of applied voltage. Also collection efficiency of electro spun filters is increased with increasing surface charge potential and surface charge density. But the surface charge potential is decreased by natural decay and it causes deterioration of particle collection efficiency.