• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.681-688
• /
• 1996

To investigate the effort of drying methods on the physicochemical properties of agar, gel strength, viscosity, melting and setting point, and phase transition by differential scanning calorimetery (DSC) during its heating were determined. In addition the structural differences of agar powder by scanning electron microscope (SEM) was examined. The most shortest onset temperature of gel strength increase was extruding method among any other methods. Viscosity of agar with hot air method, 400.00 cps at $45^{\circ}C$, was markedly increased, but with spraying and extruding ones were little change. The melting and setting point, and the temperature for maximum endothermic and enthalpy for agar with extruding one, $80.01^{\circ}C,\;36.05^{\circ}C\;and\;61.72^{\circ}C,\;0.73\;cal/g$, respectively, were lowest among the drying ones. But in the case of reheating after gelling, there were little change in all methods. Observing the surface structure of agar with SEM, extruding method showed the most unstable with absorptive property.

• Korean Journal of Food Science and Technology
• /
• v.39 no.3
• /
• pp.295-298
• /
• 2007

In order to sterilize Bacillus cereus and Enterobacter sakazakii in rice flour, hot-air drying ($65^{\circ}C$/15 min, HT) and microwave drying (700 watt/30 sec, MT) treatments were evaluated and a storage study performed. Color changes (${\Delta}E$) appeared to be less in the MT rice flour than in HT treated rice flour. The effectiveness of the MT treatment showed reduced growth rates for B. cereus (0.54 log CFU/g) and E. sakazakii (1.45 log CFU/g). The populations of B. cereus in the control (NT) rice flour greatly increased during storage at 4, 10 and $20^{\circ}C$ as storage times increased. However, the growth of B. cereus was minimized in the MT rice flour. In conclusion, MT treatment is considered to be a good drying method when substituted for HT treatment to assure microbial safety in rice flour.

• Food Science and Preservation
• /
• v.25 no.1
• /
• pp.155-163
• /
• 2018

The present study was carried out to investigate the physicochemical properties of hot water extracts of red ginseng powder prepared by two-stage hot air drying method using steamed ginseng and steaming liquid for 2.5 h under high-temperature and high-pressure autoclave condition. The total polyphenols, total flavonoids, total sugar, acid polysaccharides and crude saponin in hot water extracts from red ginseng powder were analyzed and determined, and the flavor components of ginseng were measured using color difference meter and an electronic tongue. The total polyphenol, total flavonoid, total polysaccharide, and acid polysaccharide of the red ginseng hot water extract obtained by autoclaving (ARG) were 9.06 mg GAE/g, 3.38 mg NE/g, 35.22 g/100 g, and 10.90 g/100 g, respectively. The final contents of the total polyphenols, total flavonoids, crude saponin were higher than those determined using other red ginseng methods; the time required for steamed red ginseng production reduced. The total ginsenoside content of ginseng including Rb1 was 10.69 mg/g, which is the lowest ARG. The processing conditions affected the conversion to ginsenosides unique to red ginseng. Red ginseng and steaming liquid obtained from the autoclave are expected to be in need for non-food materials and products as well as foods by improving the flavor components through conversion of red ginseng components into low molecular weight.

• Applied Biological Chemistry
• /
• v.24 no.4
• /
• pp.218-223
• /
• 1981

This study was conducted to investigate the effects of post-harvest drying method and subsquent storage condition on the quality of garlic bulbs for 10 months from July, 1980 to April, 1981. The 27% weight loss of garlic bulbs by HPHD (hot air post-harvest frying) for 12 days at $40^{\circ}C$ (8hrs/day) was equal to that by NPHD (conventional natural post-harvest drying) for 35 days. But the decay occured 5.5% only in NPHD. During the storage period of garlic bulbs by HPHD, their decay and weight ]oss were less 25.4% and 13.5% in ambient storage, and less 14.2% and 7.5% in low temperature storage than those of NPHD. When garlic bulbs were stored in low temperature, the weight loss and decay were less 20.0% and 22.4% in NPHD, and tess 14.0% and 9.9% in HPHD than those in ambient temperature storage. The Quality of garlic bulbs packed with 0.08mm polyethylene film stored at ambient temperature for 2 months was so poor as to be inedible because of the adverse effect of $CO_2$ and the growth of molds, but in low temperature storage for 10 months it was in good shape showing the weight loss, the decay and the sprouting 2.6%, 3.4% and 26.8%, respectively.

• Food Science and Preservation
• /
• v.14 no.2
• /
• pp.148-153
• /
• 2007

The chemical components of flesh persimmon flowers (petal and calyx), and the qualify of hot-water extracts (teas) prepared from powders of these flower parts, were investigated In flesh petal and calyx, the contents of moisture, crude protein, crude lipid, and carbohydrate were 84.8% 0.4% 0.3% and 13.7% respectively. The values were not significantly different when the two tissues were compared. In petal and calyx respectively, the crude ash values were 0.5% and 1.1% of flesh weights, the vitamin C content were 192.3mg% and 392.7ng%, the flavonoid levels were 98.4 mg% and 355.2mg% and the carotenoid content were 0.8mg% and 3.8mg%. Hot air and freeze drying methods applied to petals, prior to powder preparation, did not affect the levels of soluble solids or soluble annins. Extract from calyx had higher L values, higher ${-\alpha}$ values, more soluble tannins, greater 1,1-diphenyl-2-picrylhy-drazylradical-scavenging activities, me lower pH values, than did exracts from petal. Fructose and glucose were higher in petal extract than in calyx extract, but sucrose was higher in calyx extracts. Extract of freeze-dried powdered petals had significantly higher free sugar levels than did exracts from petals dried with hot air. The major organic acids in extracts were citric acid, oxalic acid, and malic acid. The levels of organic acids were inversely related to free sugar levels in all flower parts and after all drying methods tested. Sensory tests of aroma, taste and overall acceptability yielded scores above medium for all teas, regardless of the flower part powdered, or the drying method used. The results show that the petal and calyx of persimmon may be used to make tea and perhaps other foods.

• Culinary science and hospitality research
• /
• v.24 no.1
• /
• pp.105-113
• /
• 2018

In this study, optimized pre-treatment conditions were investigated to improve the quality of gochujang apple jangachi. The moisture content was decreased by 14% in 60% sugar solution and 17% in 30% salt solution during 12 hours. On the one hand, in the case of dry sugar and salt method, moisture content was decreased rapidly by 20% and 24%, respectively during 12 hours. Compared with the sugar and salt solution method, the dry sugar and salt method was more effective in reducing moisture content during 12 hours. In the case of osmotic dehydration of the apple parts in the dry sugar method, the moisture content of the flesh, flesh including peel, and peel of apple decreased by 23%, 20%, and 16%, respectively during 6 hours. However, in the dry salt method, the moisture content of the flesh, flesh including peel, and peel of apple decreased by 19%, 12% and 13%, respectively during 2 hours. During this time, the pH tended to decrease, regardless of the presence of sugar and salt. Total acidity was slightly increased in the case of salt. In hot air drying after osmotic dehydration, the moisture content of flesh including peel of apple decreased from 64% and 67% to 31% and 27%, respectively at 90 minutes, and from 64% and 67% to 11% and 18% at 150 minutes, respectively. The moisture content of the peel decreased from 51% to 10% at 120 minutes. As a result of the sensory evaluation, the overall acceptance of the flesh and flesh including peel was highly evaluated, resultantly, the products were considered to be suitable for the production of gochujang apple jangachi.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.139-145
• /
• 1998

This study was performed to provide fundamental data on the optimum manufacture condition of oleoresin using citron peel. Oleoresin was extracted from freeze-dried or hot air dried citron peels using various solvents (hexane, ether, dichloromethane, acetone. and methanol), mixing ratio, extraction temperature, and time. As a result, optimum extraction conditions of oleoresin were: solvent mixing ratio 1:10 (w/v), extraction time 2 hours, and extraction temperature $60^{\circ}C$ when used methanol, and their dichloromethane 1:10 (w/v), 4 hours and $20^{\circ}C$, respectively. At optimum extraction conditions, the yield of oleoresin was shown that 35.79% at hot air drying samples, 32.04% at freeze-dried ones when extracted by methanol, but shown 5.86% and 6.16% when used dichloromethane respectively. The number of volatile components present in citron oleoresin were confirmed as thirty two in methnol extracion method and twenty nine in dichloromethane extraction method by GC and GC/MS, respectively. But, in the kinds and amounts of volatile flavor components, relatively greater numbers of volatiles were identified in freeze-dried sample extracted by dichloromethane compared with other methods. In freeze-dried sample extracted by dichloromethane, volatile components of citron oleoresin predominantly occupied by limonene and ${\gamma}-terpinene$ with about 85%. Other important compounds were shown hydrocarbons. such as ${\alpha}-pinene$, myrcene, terpinolene, ${\beta}-farnesene\;and,\;{\delta}-elemene$, and linalool as alcohols.

• Food Engineering Progress
• /
• v.21 no.4
• /
• pp.326-331
• /
• 2017

A cultivar (Malus domestica cv. Fuji) of apple was selected to make apple peel (AP) powder by three different powdering methods. Frozen AP was thawed and subsequently was dried or ground without drying. After AP was dried by hot-air drying at $60^{\circ}C$ or freeze-drying, the dried AP was ground using a conventional blender. Separately, the thawed AP was powered by using a cryogenic micro grinding technology (CMGT). The ground AP and three types of AP powder were extracted using deionized water, 20, 40, 60, 80, or 100% methanol, followed by vacuum evaporation. The total phenolics contents (TPC), total flavonoids contents (TFC), DPPH, and ABTS radical scavenging capacities of each extract were compared to determine an efficient powdering method. Lyophilized AP powder extract using 60% methanol showed the highest TPC and DPPH radical scavenging capacity. In contrast, 60% methanol extract of the powder by CMGT, resulting in the smallest particle, exhibited the highest TFC and ABTS radical scavenging capacity. This study suggests that the extraction yield of bioactive compounds from AP may be varied according to different powdering methods and that a new powdering process such as CMGT may be applicable to develop functional foods efficiently.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.139-140
• /
• 2017

This technology employs a method of forming a single-ply PLUS waterproofing sheet layer comprised of applying a single-ply synthetic polymer layer on a vibrating structure (steel frame, RC) or an inclined surface by using a T joint lap-filling coil and an embedded metal coated sheet. The T - joint reinforcing lap-filling coil was used to block the ingress channel of the rainwater by applying the material in the vulnerable area where the three sides of the waterproof sheet overlapped. Conventional waterproofing techniques have a problem in that the waterproof sheet is pierced because the end portion of the waterproof sheet applied to the vertical portion is fixed by a nail, and the sealant applied to the end portion of the sheet cannot easily secure long-term waterproof durability due to the influence of the external environment. Therefore, the developed technology secured the waterproof durability against the vertical part by using the embedded metal sheet. In addition, automatic hot-air fusing is used to improve the quality of waterproof construction and point fixation method using fixed hardware. This is a technology that is not significantly restricted in the high degradation level regions of domestic waterproof construction environments in Korea such as low-temperature environment, wet floor.

• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.355-361
• /
• 2009

Polycyclic aromatic hydrocarbons (PAHs) are environmental carcinogenic compounds that arise by several means including food processing methods such as smoking and direct drying and cooking. This study examined the concentration of PAHs in sesame oils with various roasting temperatures (190, 220 and $250^{\circ}C$), methods (direct heating vs. indirect hot air heating), and times (5, 10, 15, 20 and 25 min). The PAHs in the sesame oils were analyzed using liquid-liquid extraction and solid-phase clean up (Florisil), followed by HPLC with fluorescence detection. According to the results, mean levels of total PAHs increased when the sesame oils were roasted at increasing temperatures and times. The sesame oil roasted at $250^{\circ}C$ for 25 min had the highest mean value of total PAHs (4.66 ${\mu}g$/kg). The results of this study suggest that the indirect hot air roasting method decreased PAH formation during sesame oil processing.