• ETRI Journal
• /
• v.28 no.5
• /
• pp.668-671
• /
• 2006

In this letter, an adaptive scanning that improves intra coding efficiency in the H.264/AVC standard is proposed. The proposed adaptive scanning utilizes the prediction directions (modes) that include the horizontal and vertical edge information in a block. Depending on the prediction directions, the proposed method uses three scanning methods: zigzag scanning, horizontal scanning, and vertical scanning. In the proposed method, horizontal and vertical scanning are used in vertical and horizontal prediction modes, respectively, and the normal zigzag scanning in the H.264 standard is used in all other intra prediction modes. The proposed method reduces the bit rate by approximately 2.5% compared with H.264/AVC, without the degradation of video quality.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.121-126
• /
• 2012

We propose a novel technique that records the horizontal-parallax-only (HPO) hologram of a real object using optical scanning holography (OSH). The proposing HPO-OSH is composed of a conventional OSH and an electronics low pass filter. When we scan an object along vertical direction before horizontal direction, the electronic low pass filter filters the vertical fringes with preserving horizontal fringes and gives an HPO hologram. To the best of our knowledge, this is the first time to record the HPO hologram using OSH without either truncation of the scanning beam or digital post processing.

• Korean Institute of Interior Design Journal
• /
• v.23 no.5
• /
• pp.76-85
• /
• 2014

When conscious and unconscious exploring information of space-visitors which is contained in the information acquired in the process of seeing any space is analyzed, it can be found what those visitors pick up as factors in the space for its selection as visual information in order to put it into action. This study, with the object of the space reproduced in three dimensions from the cafe which was visited for conversation, has analyzed the process of acquiring space-information by sex to find out the features of scanning path, findings of which are the followings. First, the rate of scanning type of males was "Combination (50.5%)- Circulation (31.0%) and that of females "Horizontal (32.5%) - Combination (32.1%)", which shows that there was a big difference by sex in the scanning path which took place in the process of observing any space. Second, when the features of continuous observation frequency by sex is looked into, the trends of increased "horizontal" scanning and decreased "Combination" scanning of both showed the same as the frequency of continuous observations increased, while in case of "Circulation" scanning, that of females was found to decrease but that of males showed the aspect of confusion. Third, the 'Combination' scanning of males was found strong at the short observation time with three times of continuous observation frequency defined as "Attention Concentration" while the distinct feature was seen that the scanning type was dispersed to "combination-circulation" as the frequency of continuous observation increased. Females start the information acquirement with "combination-circulation" but in the process of visual appreciation they showed a strong "Horizontal" These scanning features can be defined as those by sex for acquiring space information and therefore are very significant because they are fundamental studies which will enable any customized space-design by sex.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.207-218
• /
• 2006

The extraction of horizontal alignment and cross-section of roads is very important task in road safety diagnosis. Existing road safety diagnosis methods by investigators need much time and expense but don't provide various data. Therefor, we need road shape classification automatically and extraction method of horizontal alignment and cross-section of roads through digital photogrammetry system using GPS-VAN with laser scanner. In this paper, we propose a method of mobile laser scanning data acquisition, processing and developing extraction methods of horizontal alignment and cross-section of roads using mobile laser scanning data by GPS-VAN.

• ETRI Journal
• /
• v.25 no.2
• /
• pp.109-120
• /
• 2003

Though the airborne laser scanning (ALS) technique is becoming more popular in many applications, horizontal accuracy of points scanned by the ALS is not yet satisfactory when compared with the accuracy achieved for vertical positions. One of the major reasons is the drift that occurs in the inertial measurement unit (IMU) during the scanning. This paper presents an algorithm that adjusts for the error that is introduced mainly by the drift of the IMU that renders systematic differences between strips on the same area. For this, we set up an observation equation for strip-wise adjustments and completed it with tie point and control point coordinates derived from the scanned strips and information from aerial photos. To effectively capture the tie points, we developed a set of procedures that constructs a digital surface model (DSM) with breaklines and then performed feature-based matching on strips resulting in a set of reliable tie points. Solving the observation equations by the least squares method produced a set of affine transformation equations with 6 parameters that we used to transform the strips for adjusting the horizontal error. Experimental results after evaluation of the accuracy showed a root mean squared error (RMSE) of the adjusted strip points of 0.27 m, which is significant considering the RMSE before adjustment was 0.77 m.

• Tunnel and Underground Space
• /
• v.26 no.4
• /
• pp.304-315
• /
• 2016

In this study, the current horizontal stress characteristics of the Tertiary rock formations in the Pohang Basin are investigated on the basis of the in-situ rock stress measurements at depths from 75 m to 716 m of the 3 test boreholes in the Doumsan area, Pohang. The deep hydraulic fracturing stress measurement results indicated that the horizontal stress components in the test site appear far lower than the average ones by the linear fit for the data set measured from the other domestic sites. But, borehole scanning revealed clearly that lots of small and large scale borehole failures occurred due to the low strength characteristics of the existing rocks. To obtain more accurate and overall information on the horizontal stress direction, the integrated analysis combining the hydraulic fracturing stress measurement and borehole scanning data set were additionally carried out. The analysis results showed that in the upper sedimentary and the lower volcanic rock formation, the dominant orientations of the current maximum horizontal stress components were appeared in the range of $80^{\circ}{\sim}100^{\circ}$ (N80E~N80W) and $120^{\circ}{\sim}140^{\circ}$ (N60W~N40W), respectively. From this study result it was found that the maximum horizontal stress directions have a tendency to rotate in a clockwise direction as the rock formation changes with depth in the test site.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.183-183
• /
• 2020

MEP layout and 3D Laser scanning are widely used equipment for displacement measurement in construction site. In this study, MEP layout and 3D Laser scanning were used to measure the lateral displacement of the same structure, and then the advantages and disadvantages of each were compared and analyzed. In general, it has been shown that MEP layout can save a lot of time compared to 3D Laser scanning. And it was found that the lateral displacement measurement results measured at a distance of 15m were similar to each other.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.49-56
• /
• 2015

To investigate fiber orientation of Korean traditional paper, Hanji, the fiber arrangements on the surface and cross section of Hanji were observed by scanning electron microscope (SEM). The surface observation showed that the fibers of traditional paper were arranged in vertical and horizontal directions, and those of ssangbal sheet forming were arranged more in vertical direction. The fibers of machine made Hanji and copying paper were usually arranged in vertical direction. As for the observation of cross section of traditional paper, fibers arranged in horizontal direction tended to be increased with the increase of thicknesses. The thick traditional paper have cracks in the middle part of structural section of paper. They were larger in cross section in horizontal direction than in vertical direction. The horizontal arrangement of traditional paper seemed to be about 8% to 14% higher to the vertical arrangement, which is very lower to other papers.

• Korean Journal of Optics and Photonics
• /
• v.25 no.2
• /
• pp.85-89
• /
• 2014

In this paper, we present a speckle-free digital hologram with conversion to an off-axis horizontal-parallax-only (HPO) hologram. First, we record the speckle-free hologram using optical scanning holography. Second, we digitally convert the full-parallax hologram to a horizontal-parallax-only hologram. Third, we convert the horizontal-parallax-only hologram to an off-axis hologram. Finally, we show that the off-axis HPO hologram can be numerically reconstructed in space.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.225-232
• /
• 1998

Currently NTSC, PAL, and SECOM are widely used for TV broadcasting systems. In Korea, NTSC has been used to reduce transmission bandwidth and broadband flickers using the Interlaced scanning method. Image data in the Interlaced scanning method require De-interlacing compensation for PC-based multimedia applications. The existing compensation algorithms such as ZOI, FOI, and ELA provieds simple computations and effective image compensation while the PSNR is low and horizontal and vertical edges are hardly detected. In this paper, the ADI(Adaptive De-Interlacing) algorithm that can increase PSNR and detect horizontal and vertical edges is proposed and a hardware system is implemented using three ACTEL 1020B FPGA chips. The system consists of the algorithm part implemented using two FPGAs and the memory control part implemented using rest one. Also the system operation is investigated for real time processing.