• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.338-345
• /
• 2000

In this study, applicability of PMT in domestic area and test procedure were studied. At six test holes of three construction sites in Pusan, PMT using Elastometer-200 type was done. The problems during test were investigated and the test results were analysed. Limit pressure, p$\sub$ι/ could be determined by p- Δv/v method. Using PMT results, marine soil in Pusan could be classified approximately. Net limit pressure value was in the range of 6.4 ∼ 22.5 kg/$\textrm{cm}^2$ in clay, 2.2 ∼ 30.0 kg/$\textrm{cm}^2$ in sand, 13.0 ∼ 58.0 kg/$\textrm{cm}^2$ in weathered soil and 47.0 ∼ 190.0 kg/$\textrm{cm}^2$ in weathered rock. Also, E$\sub$m//p$\sub$ι/ value was in the range of 2.4 ∼ 7.0 in clay, 2.6 ∼ 12.1 in sand, 6.8 ∼ 17.1 in weathered soil and 7.2 ∼ 29.6 in weathered rock.

• 디지털산업정보학회논문지
• /
• 제5권1호
• /
• pp.99-105
• /
• 2009

Recently the research is much interested in about the inspection system using by computer vision system. In this paper, we deal with shape inspection technique for moving to be long and narrow object on conveyor belt. first, we are acquired for moving object on conveyor belt. then the object segmentation is using by color information for background and object. the object position be calculated by horizontal and a vertical histogram. second, we are checked for two hole in front part, widths and top/bottom side information in middle part, and finally checking for two holes in rear part. The performance of our proposed model is evaluated by experiments, within error of 1㎜, and can be checking to 17 object /min.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.140.2-140
• /
• 2001

In this paper, we develop the system which inspects the metal mask using area scan camera and belu type xy-table and introduce its inspection algorithm. Thes whole area of the metal mask is divides into several inspection block and the sixe of a inspection block is decided by FOV(Field of View). To compare with the camera image of each block, the reference image is made by gerber file. The ratation angle of the metal mask is calculated through the linear equation that is substituted two end points of horizontal boundary of a specific hole in a camera image for. To calculate the position error caused by belt type xy-table, hough-transform using the distances among the holes in two images os used. The center of the reference image is moved as much as the calculated position error to be coincide with the camera image ...

• 치과방사선
• /
• 제21권1호
• /
• pp.137-143
• /
• 1991

In the study of the focal trough of panoramic radiograph using Panoura Eight-S (the Yoshida company), a series of 63 X-ray films were taken with the 8-19 metal pins placed in the holes of the plastic model plate and evaluated by 4 observers. The author analized the focal trough defined by the sharpness criteria and calculated dimension of focal trough in the horizontal plane. The results were as follows; 1. Focal trough was not continued in the anterior region within a very high degree of sharpness. 2. With optional sharpness, the width of anterior and posterior focal trough was approximately l3㎜ and 60㎜ respectively. 3. The focal trough was narrow in the anterior region and was flared laterally with symmetry in posterior region. 4. Sharp image began to show at the position of 18㎜ posteriorly from the most anterior position of chin rest.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.27-31
• /
• 2006

Non-contact transportation system using air cushion for the manufacturing of large-sized LCD panels was considered. Flow characteristics between air pad and glass plate was analyzed using computational fluid dynamics method to obtain optimized air pad configurations. Effects of the design variables such as hole arrays from which gas is injected, gas-feeding method into the gas supplying channels, and horizontal and vertical pitches of clusters of holes were studied. Optimized air pad unit gave evenly distributed pressure contour on the glass surface and well-suspended levitation height in the experiment.

• Steel and Composite Structures
• /
• 제22권1호
• /
• pp.183-201
• /
• 2016

Perforated steel beams can be optimised by increased beam depth and the moment of inertia combined with a reduced web thickness, favouring the use of original I-section beams. The designers are often confronted with situations where optimisation cannot be carried out effectively, taking account of the buckling risk at web posts, moment-shear transfers and local plastic deformations on the transverse holes of the openings. The purpose of this study is to suggest solutions for reducing these failure risks of tested optimal designed beams under applying loads in a self-reacting frame. The design method for the beams is the hunting search optimisation technique, and the design constraints are implemented from BS 5950 provisions. Therefore, I have aimed to explore the strengthening effects of reinforced openings with ring stiffeners, welded vertical simple plates on the web posts and horizontal plates around the openings on the ultimate load carrying capacities of optimally designed perforated steel beams. Test results have shown that compared to lateral stiffeners, ring and vertical stiffeners significantly increase the loadcarrying capacity of perforated steel beams.

• Wind and Structures
• /
• 제7권2호
• /
• pp.131-144
• /
• 2004

A technique for the simulation of atmospheric boundary layers in wind tunnels is developed and tested experimentally. The device consists of a grid made of seven horizontal and vertical evenly distributed bars in which air injection holes are drilled in order to influence the flow in the wind tunnel. The air flow in each bar can be controlled independently. Firstly, the device is used together with a rough carpet, which covers the test section floor, in order to simulate the boundary-layer characteristics over an open rural area. Hot-wire measurements, performed at different positions in the test-section, show the capability of the grid in generating the required boundary layer. An acceptable agreement with statistical values of mean velocity and turbulence profiles has been achieved, together with a good span-wise homogeneity. The results are also compared with those of a passive simulation technique based on the use of spires.

• Steel and Composite Structures
• /
• 제32권1호
• /
• pp.79-90
• /
• 2019

This study introduces new connections that connect the beam to the column with slit dampers. Plastic deformations and damages concentrate on slit dampers. The slit dampers prevent plastic damages of column, beam, welds and panel zone and act as fuses. The slit dampers were prepared with IPE profiles that had some holes in the webs. In this paper, two experimental specimens were made. In first specimen (SDC1), just one slit damper connected the beam to the column and one IPE profile with no holes connected the bottom flange of the beam to the column. The second specimen (SDC2) had two similar dampers which connected the top and bottom flange of the beam to the column. Cyclic loading was applied on Specimens. The cyclic displacements conditions continued until 0.06 radian rotation of connection. The experimental observations showed that the bending moment of specimen SDC2 increased until 0.04 story drift. In specimen SDC1, the bending moment decreases after 0.03 story drift. Test results indicate the high performance of the proposed connection. Based on the results, the specimen with two slit damper (SDC2) has higher seismic performance and dissipates more energy in loading process than specimen SDC1. Theoretical formulas were extended for the proposed connections. Numerical studies have been done by ABAQUS software. The theoretical and numerical results had good agreements with the experimental data. Based on the experimental and numerical investigations, the high ductility of connection is obtained from plastic damages of slit dampers. The most flexural moment of specimen SDC1 occurred at 3% story drift and this value was 1.4 times the plastic moment of the beam section. This parameter for SDC2 was 1.73 times the plastic moment of the beam section and occurred at 4% story drift. The dissipated energy ratio of SDC2 to SDC1 is equal to 1.51.

• 전자공학회논문지SC
• /
• 제40권2호
• /
• pp.1-9
• /
• 2003

본 논문에서는 ASC(Area Scan Camera)를 이용한 비젼시스템과 belt type xy-table을 사용하여 metal mask의 홀 생성유무 검사시스템을 개발하고, 적용할 수 있는 알고리즘을 소개한다. Metal mask의 전체 영역을 일정한 크기의 검사영역으로 분할한다. 각각의 검사영역의 크기는 ASC의 FOV(Field of View)와 동일하다. 이때 belt type xy-table에서 발생하는 위치오차를 고려하여 일정영역을 중첩하여 분할한다. 검사블록에 대한 카메라이미지는 gerber 파일을 이용하여 생성한 기준이미지와 비교된다. 검사장치에 장착된 metal mask의 회전각도를 계산하기 위하여 존재하는 가장 큰 홀에 대한 카메라이미지를 획득하고, 홀의 수평 에지를 추출한 후 직선의 방정식을 이용한다. Belt type xy-table의 backslash와 같은 기계적 결함에 의해 기준 이미지와 카메라이미지에 존재하는 홀 사이에는 위치오차가 존재한다. 두 이미지를 일치시키기 위해 각 이미지에 존재하는 홀의 무게중심점을 이용한 HT(Hough-Transform)을 사용하여 위치오차정보를 추출하고, 기준이미지의 중심점을 이동시킨다. 각각의 이미지에 존재하는 홀에 대한 무게중심점, 면적, 가로길이, 세로길이 등의 정보를 레이블링을 통하여 구한다. 두 이미지에 존재하는 홀의 무게중심점과 면적을 이용하여 홀의 생성 유무를 판단한다. 그리고 실제로 시스템을 제작하여 위 알고리즘을 적용한다.

• 한국해안해양공학회지
• /
• 제14권4호
• /
• pp.265-273
• /
• 2002

본 논문에서는 수면 밑에 잠긴 수평형 타공판의 소파특성을 이론계산과 모형실험을 통하여 살펴보았다. 타공판은 일정한 크기의 구멍이 균일하게 배열된 형태로, 파가 타공판 위를 통과하면서 타공판의 구멍을 통하여 강한 제트 흐름이 형성되면서 파 에너지가 소멸되는 특징을 가지고 있다. 이론해석 방법으로 선형파 이론에 근거한 고유함수전개법을 사용하였다. 타공판을 통과하는 유체의 법선방향속도는 타공판 전후의 압력차에 선형적으로 비례한다는 Darcy의 법칙을 가정하였다. 이때 공극율 계수라 불리는 비례상수는 타공판의 공극율과 밀접한 관계가 있다. 공극율 계수와 공극율사이의 함수 관계식을 얻기 위하여 수직벽 앞에 놓여진 6개의 서로 다른 공극율을 가진 타공판에 대하여 규칙파중에서 반사율을계측하였다. 해석결과와 모형실험결과를 비교하여 공극율 계수와 타공판의 공극율사이에는선형관계(b=57.63P-0.9717)가 있음을 밝혔다. 또한 최대 소파성능을 발휘하는 타공판의 공극율은 0.1근방이며, 잠긴깊이의 범위는 $d/h\\leq0.2$임을 확인하였다.