• Earthquakes and Structures
• /
• v.20 no.4
• /
• pp.405-415
• /
• 2021

Following the dynamic property analysis and elaboration, linear response spectrum analysis (RSA) and response history analysis (RHA) were conducted on a representative hyperbolic cooling towers (HCT) in present study. The seismic responses in tower shell were illustrated in detail, including the internal force amplitude, modal contribution, influence from damping ratio, comparison of results got from RSA and RHA and especially the latitude distributions of internal forces. The results show that the eigenmodes could be classified in a new method into four types according to their mode shapes and only the lateral bending modes and vertical stretching modes are meaningful for horizontal and vertical earthquake correspondingly. The bending modes and seismic deformation display the same feature which is global lateral bending accompanied by minute circular flow displacement of section. This feature also decides the latitude distributions of internal forces as sine or cosine. Moreover, the following method is also proposed for approximate estimation of internal force amplitudes without time-consuming response history analysis: getting the response spectrums of the selected ground accelerations and then comparing values of response spectrums at the natural period of first lateral bending mode because it is always prime dominant for horizontal seismic responses.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.131-142
• /
• 2022

In order to examine the possibility of horizontal simulations of acoustic waves on the environments of big water depth variations, this study introduces a 3-dimensional model based on the pababolic equation. The model gives approximated solutions by separating the cross- and non cross-terms in the equation. Assuming artificial bathymetry (25 km × 4 km) with a source frequency 75 Hz, the simulations give clear horizontal refractions on the transmission loss distributions. The degree of refractions shows non-linear increase along the propagating range and proportional increase with water depth along the cross range. Another simulations with the real bathymetry (25 km × 8 km) also give clear horizontal refractions. The horizontal distributions present little difference with the depth resolution variations of the same data source because the model gives interpolations over the depth data before simulations. Meanwhile, the horizontal distributions show big difference with those of different data sources.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.64-72
• /
• 2000

Surface roughness is one of the most important characteristics in machining processes. This study presents probabilistic models to estimate surface roughness experimentally in multi-pass horizontal surface grinding operations from three independent distributions such as the initial surface roughness distributions of workpiece, the distributions of the wheel radius, and the distributions of distances between major active grains. To specify the model characteristics from surface roughness measurements, either the probability satisfying a given surface roughness or the range of surface roughness satisfying a given probability have been estimated while grinding conditions are fixed. Finally, the relationship between grinding conditions satisfying surface roughness range under a given probability can be established.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.4
• /
• pp.3-9
• /
• 1991

This paper presents the characteristics of antenna factors of half-wave resonance dipole antennas above a ground plane. The current distributions on a horizontal and vertical dipole antennas were analyzed by the Galerkin's method of moments, and these solutions are used for calculating the horizontal and vertical antenna factors above the ground plane. It is shown that accurate antenna factors of the horizontal and vertical dipole above the ground plane are required of the radiated emission test.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.4
• /
• pp.440-450
• /
• 2006

PM10, NOx, and $O_3$ were measured at six locations, of which each three is horizontally and vertically distributed respectively, in an apartment complex around the heavily traffic road. Those were measured seven times a day with two hours interval starting from 8 o'clock in the morning for 15 days during May 2005 $\sim$ September 2005. PM10 and NOx showed high concentrations in rush hours while low concentrations in midday due to the direct emissions from automobiles in operation. Temporal variations of 01 showed very much similar trend appeared in normal urban atmospheres. The spatial distributions of PM10, NOx and $O_3$ showed that almost all of concentrations were higher in a row of Roadside > Surface at 130 m apart from the road > Surface at 230 m apart from the road > 3rd floor of apartment building > 15th floor of apartment building > 27th floor of apartment building. Model equations, which can project spatial concentration distributions, were constructed by combining the horizontal and the vertical linear regression equations derived from six mean values corresponding to six measuring locations. According to inter-comparison of PM10, NOx, and $O_3$ with the constructed model equations, concentration gradients were higher in a row of Vertical direction of NOx > Vertical direction of PM10 > Horizontal direction of NOx > Horizontal direction of PMIO > Vertical direction of $O_3$ > Horizontal direction of $O_3$. Why concentration gradient of particulate PM10 is lower than that of gaseous NOx is in question, and should be studied.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.514-520
• /
• 2008

Purpose: Many attempts have been made to describe ideal facial proportions for over two thousands year and constantly lasted till now. Dr. Marquardt has derived supposedly ideal facial proportions from the facial golden mask using golden ratio of 1 : 1.618. On the other hand, facial reducing surgeries such as mandible angle reduction are popularized in Asia because the width of mid and lower face of Korean is recognized to be wider. The purpose is to analyze characters of Korean university students' faces in horizontal plane and establish the objective data for facial width distributions and clinical applications. Methods: We applied the facial golden mask to the photographs in 1000 cases, compared the width of mid and lower face between the facial golden mask and Korean university students' faces. And we first calculated the horizontal ratio(HR) of middle and lower face each for using comparative scale of width, facial golden mask. We divided 1,000 cases into 3 groups by degrees of HR and analyzed data of HR on each groups. Using calculated horizontal ratio, we newly invented the cumulative frequency of distribution graphs in Korean university students' faces. Results: Mean data of HR were over 1.0 in all groups, which means that Korean university students' faces are typically wider than facial golden mask in horizontal planes. And this study was statistically significant(p- value < 0.05). Clinically using the cumulative frequency distributions of Korean university students' face width, we can easily explain changes of facial width to patient after facial reducing surgery and describe the changes into objective data. Conclusion: This study concludes thatKorean university students' faces are wider than facial golden mask is significantly true and the cumulative frequency of distribution graphs are expected to be widely used for comparison of results in facial reducing surgery.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.76-87
• /
• 1992

Flow and heat transfer characteristics in a horizontal electronic circuit board are studied numerically. The board has the arrays of heated blocks and the spaces between the plates and blocks are changed. Air in used as cooling fluid, of which prandt1 number is 0.7. The velocity distributions, temperature distributions, Nusselt numbers and dimensionless friction factors are obtained on the spaces between the plates and the blocks, for the cases of Rayleigh number, 0 and 10$^{5}$ . When Rayleigh number is so large, such as 10$^{5}$ , that the effect of bouyancy is not negligible, fluid friction and heat transfer is increased more than those of forced convection. This may be caused by the generation of secondary flow on the cross section of primary flow. The effect of bouyancy is of the most efficient, when the space of blocks is about block-width and the space of plates is about 1.7 times of block-height.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.3
• /
• pp.145-152
• /
• 2001

Low Rayleigh number thermal convection in a fluid layer confined between two-infinite horizontal walls kept at spatially sinusoidal temperature distributions, T_L=T_m+\Delta T\sin \kappax,\;T_U=T_m+\Delta T\sin(\kappax-\beta)$, is theoretically investigated by a regular perturbation expansion method. For small wave numbers, an upright cell is formed between the two walls at $\beta$=0. The cell is tilted, as the phase difference increases, and a flow with tow counter-rotating eddies occurs at $\beta=\pi$. when the wave number is large, isolated eddies are formed near the lower and upper walls, for all the phase differences. There exists a wave number at which maximum heat transfer rate at the walls occurs, at each of the phase differences. And the wave number increases with increase of the phase difference. for a fixed wave number, the heat transfer rate decrease with increase of the phase difference.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.47-57
• /
• 1997

As a general index in surface quality of machined products, surface roughness is to measure worker's skill level, a ground product quality and machining accuracy, etc. The surface roughness is defined by a function of rotational speed and radius of a grinding wheel, distances of active grains composed of the wheel, and feed of a grinder's worktable. To predict surface roughness in horizontal surface grinding operations, probability distributions were used. Probability distribution functions(p.d.f.) of surface roughness were found as results when the size of active grains(=the radius of a grinding wheel) is given as uniform, exponential distribution, and the distance between active grains follows the distributions of uniform, exponential. For each pdf case, probabilistic features of surface roughness were also analyzed and presented. This study is a substantial step for determining mathematically the surface roughness instead of using empirical approaches. More works should be presented to develop a general model by which an accurate roughness value can be obtained in horizontal surface grinding operations.

• Journal of electromagnetic engineering and science
• /
• v.14 no.3
• /
• pp.278-283
• /
• 2014

This paper presents a theoretical approach for a modified turnstile antenna suitable for satellite communication in order to investigate the current distributions of radiators and radiation characteristics with equivalent model analysis. The proposed equivalent model is composed of an ideally horizontal dipole antenna and vertically loaded top-hat radiating elements. The required isoflux pattern with wide beamwidth has been achieved by attaching top-hat elements to the main radiators. In addition to illustrating radiation patterns, electrical performances like current distributions have been analyzed by mathematically manipulating the equations derived from the equivalent horizontal and vertical dipole model.