• Journal of Periodontal and Implant Science
• /
• v.39 no.1
• /
• pp.71-76
• /
• 2009

Purpose: Many researches showed loss of alveolar bone in fresh extraction socket and even in case of immediate implant placement. The aim of this study was to evaluate the effect of non-resorbable barrier membrane on the change of buccal and lingual alveolar bone in immediate implant placement into periapically infected extraction sockets. Materials and methods: Immediate implants were placed into artificially induced periapical lesion of mandibular premolars after complete debridement using buccal bone defect made by a 6mm trephine bur in 4 mongrel dogs. Before flap repositioning, a non-resorbable barrier membrane was placed on the buccal defect in the experimental group. No membrane was placed in the control group. In 12 weeks after placement, the dogs were sacrificed and undecalcified histologic specimens were prepared. The vertical distance from the smooth-rough surface interface(SRI) to gingiva, 1st bone contact and bone crest were measured in buccal and lingual side. The horizontal thicknesses of gingiva and bone at 0, 1, 2 and 3mm below SRI were measured. Results: The buccal bone was resorbed more than lingual bone in both groups and there was statistical significance(p<0.05). The distances from SRI to 1st bone contact were $2.45{\pm}2.35\;mm$ in experimental group and $4.49{\pm}3.10\;mm$ in control group. In all vertical level, lingual bone was thicker than buccal bone(p<0.05). Conclusion: Buccal bone was reduced more than lingual bone in immediate implant placement into periapically infected extraction sockets. Placement of non-resorbable barrier membrane reduced the buccal bone resorption. However there was no statistical significance.

• Fire Science and Engineering
• /
• v.27 no.3
• /
• pp.1-7
• /
• 2013

The wildland fire intensity and scale are getting bigger owing to climate change in the world. In the case of domestic, the forest is distributed over approximately 63.7 % of country and the main facilities like a industrial facility or gas facility abuts onto it. Therefore there is potential that the wildland fire is developed to a large-scale disaster. In this study, the effect distances of the radiant heat flux from the crown fire are analysed according to the change of wind velocity. The safety criteria concerning the radiant heat flux to influence on the surrounding were researched to analyse the effect distances. The criteria of radiant heat flux were chosen $5kW/m^2$, $12.5kW/m^2$, $37.5kW/m^2$. WFDS, which is an extension of NIST's Fire Dynamics Simulator, was used to consequence analysis of the forest fire. In order to apply the analysis conditions, it is researched the forest conditions that is generally distributed in domestic region. As the result, the maximum effect distances by radiant heat were showed at the horizontal and vertical direction. When the wind velocity varied from 0 to 10 m/s, the maximum effect distance increased as the wind velocity increases. Interesting point is that the maximum effect distance were shown at the wind velocity of 8 m/s. The maximum effect distance was decreased according as the fuel moisture of trees increase. This study can contribute to analyse quantitative risk about the damage effect of the surrounding facilities caused by wildland fire.

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.295-299
• /
• 2011

Purpose: It is generally believed that alopecia is caused by various factors such as scars, stress, genetical factors, androgens, etc. Androgenic alopecia is one of the most common cause of alopecia and found mainly in males. Propecia (Merck & Co., USA) and Minoxidil (McNEIL-PPC, Inc, USA) were the drugs approved from FDA for treatment of androgenic alopecia. Surgical treatments such as flap, tissue expansion, scalp reduction and hair transplantation can be considered if necessary. Hair micrograft techniques were developed for natural hair shapes and minimal adverse effect. There were attempts to measure the length of the forehead of the Korean young adults. However attempts to classify the shape and location of forehead hairline were rare. This study attempted to find out standard hairlines of young adults in their 20s & 30s and the result would be the guideline of the hairline in hair replacement surgery of male patients in their 40s & 50s. Methods: 200 male adults in 20s and 30s were photographed and measured the length of 11 vertical index lines to determine hairline. The indexes are the distances from hairline to intercanthal midpoint (A), to medial canthus (B), to upper eyelid fissure (C), to lower eyelid fissure (D), to lateral canthus (E) and distance from lateral highest point to medial lowest point, if the hairline is M-shape (F). Additionally, we classified the hairlines into 4 groups, M, horizontal, inverted U and irregular shapes. Results: The most common hairline of male adults in their 20s is inverted U-shape (53.3%), followed by horizontal-shape, M-shape, irregular-shape. In their 30s, inverted U-shape (59%) is followed by irregular-shape, M-shape, horizontal-shape. The M-shape is more frequently found in males in 30s than those in 20s. The mean values of the indexes in their 20s are as follows: A (76.14 mm), B (Rt: 75.78 mm, Lt:76.41 mm), C (Rt: 69.43 mm, Lt: 69.92 mm), D (Rt: 76.92 mm, Lt:77.46 mm), E (Rt: 64.16 mm, Lt: 64.73 mm), F (4.09 mm). Those in their 30s are as follows: A (76.13 mm), B (Rt: 76.114 mm, Lt: 76.02 mm), C (Rt: 69.87 mm, Lt: 70.37 mm), D (Rt: 77.37 mm, Lt: 77.58 mm), E (Rt: 69.63 mm, Lt: 69.85 mm), F (6.14 mm). Conclusion: The knowledge about human body measurement is indispensable to plastic surgeons. In this study, inverted U shape is the most common type of hairline in 30s, and similar distribution is found in 20s. The percentage of M shape in their 30s is elevated more than 10% compared to that in their 20s. The study of hairline shapes and 11 indexes of hairlines can be useful for planning of the hair transplantation and postoperative evaluation. This study being based on photogrammetry, there may be differences between actual distance of curved face and projected distance on flat photographs.

• The Journal of Advanced Prosthodontics
• /
• v.6 no.6
• /
• pp.483-490
• /
• 2014

PURPOSE. The purpose of this study was to determine the average facial proportions and mandibular movement capacity of 316 first-year dental students who carefully recorded them on each other. MATERIALS AND METHODS. This early exacting clinical experience was closely supervised by the authors in Columbus, Ohio during 1969-70. Five vertical and six horizontal distances were measured on each subject's face. An ala-tragus line and an occlusal line were drawn on the left side of the face to determine if these two lines were parallel. Measurements of mandibular movements involved maximum normal and hinge opening at the incisors and maximum amounts of right, left lateral and protrusive excursions of the mandible. RESULTS. The ala width and distance between the tips of upper right and left canine cusps averaged (35.2 mm and 34.8 mm) but with very large individual variations. The distance between ala to occlusal plane lines was 29.9 mm at the tragus and 31.3 mm near the ala. The angle between orbitale and ala-tragus averaged 13.6 degrees. CONCLUSION. The upper lip length was the most variable and the distance between the pupils was the most stable of the eleven facial measurements. The ala-tragus line and the occlusal plane lines were for all practical purposes parallel. Maximum jaw opening averaged 51.2 mm which was 3.0 times larger than maximal hinge opening of 17.2 mm. The maximum right plus left side jaw excursions (9.2 and 9.4 mm) totaled 18.6 mm, 2.3 times more than the 8.0 mm mean maximum forward protrusion.

• Imaging Science in Dentistry
• /
• v.54 no.2
• /
• pp.181-190
• /
• 2024

Purpose: This study compared sequential changes in skeletal stability and the pharyngeal airway following mandibular setback surgery involving fixation with either a titanium or a bioabsorbable plate and screws. Materials and Methods: Twenty-eight patients with mandibular prognathism undergoing bilateral sagittal split osteotomy by titanium or bioabsorbable fixation were randomly selected in this study. Lateral cephalometric analysis was conducted preoperatively and at 1 week, 3-6 months, and 1 year postoperatively. Mandibular stability was assessed by examining horizontal (BX), vertical (BY), and angular measurements including the sella-nasion to point B angle and the mandibular plane angle (MPA). Pharyngeal airway changes were evaluated by analyzing the nasopharynx, uvula-pharynx, tongue-pharynx, and epiglottis-pharynx (EOP) distances. Mandibular and pharyngeal airway changes were examined sequentially. To evaluate postoperative changes within groups, the Wilcoxon signed-rank test was employed, while the Mann-Whitney U test was used for between-group comparisons. Immediate postoperative changes in the airway were correlated to surgical movements using the Spearman rank test. Results: Significant changes in the MPA were observed in both the titanium and bioabsorbable groups at 3-6 months post-surgery, with significance persisting in the bioabsorbable group at 1 year postoperatively (2.29°±2.28°; P<0.05). The bioabsorbable group also exhibited significant EOP changes (-1.21±1.54 mm; P<0.05) at 3-6 months, which gradually returned to non-significant levels by 1 year postoperatively. Conclusion: Osteofixation using bioabsorbable plates and screws is comparable to that achieved with titanium in long-term skeletal stability and maintaining pharyngeal airway dimensions. However, a tendency for relapse exists, especially regarding the MPA.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.6
• /
• pp.834-840
• /
• 2021

The management and installation methods of pressure gauges in water supply pipeline are not efficiently regulated and their installations are different in each site. In this paper, various domestic and overseas documents are examined about the pressure gauge. In order to improve the efficiency of operation management such as pipeline network and pump operation, water pressure needs to be measured as accurate as possible, by which decision making for optimal pipe network can be achieved. To get the goal, the installation of pressure gauge should be reviewed about where and how to install. In this study, an optimal horizontal distance test is conducted, in which pressure value variation is monitored and analyzed according to up and down stream distances and valve flow control, and a optimal vertical position test is also analyzed by installing the pressure gauges vertically from the up(180°) to the bottom (0°) of the pipeline.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.1
• /
• pp.99-107
• /
• 1991

The purpose of this study was to decide the proper projection angle that could avoid the superimposition of the petrous portion of temporal bone and posterior clinoid process in cephalometric lateral and basal view of the 10 dry skulls and to analyze the reproducibility of a modified Accurad-100 head holder device from Denar Co. and a cephalostat head holder in 30 transcranial radiographs of the dry skull. The results were obtained as follows: The vertical angle was 24.5±4.1° and the horizontal angle was 3.0 ±5.7°. The distances between arbitrary 3 points which were on the TMJ area were as follows: AB 16.76±0.27㎜, BC 8.79±0.18㎜ in the transcranial radiographs using modified Accurad-100 head holder, AB 29.03±0.14㎜, AC 19.95±0.24㎜, BC 10.08±0.07㎜ in the transcranial radiographs using cephalostat.

• The Journal of the Korean dental association
• /
• v.52 no.10
• /
• pp.623-632
• /
• 2014

The facial asymmetries include maxillary, mandibular, and chin asymmetries, although the most common deformity is primarily in the mandible. Common causes of this type of asymmetry can include asymmetric growth of the condyle or the mandible. In these patients, the location of the Me would be deviated to the shorter side because of the asymmetric growth of the mandible, and, commonly, the maxillary occlusal plane would be tilted toward the deviated side because the maxilla likely grows asymmetrically according to the pattern of asymmetric mandibular growth. Three-dimensional CT images are ideal for evaluating the size and location of anatomic structures, and such reconstructed images allow the use of software that can show anatomic structures from numerous angles, allowing actual measurements of distances and angles without problems of magnification, distortion, or superimposition caused by 2-dimensional imaging. In the present study using 3D-CT imaging, the 8 parameters, including measurements of the upper midline deviation, maxillary canting in the canine and first molar regions, width of the upper arch, width of the mandible at the Go, vertical length of the ramus, inclination of the ramus, and deviation of the Me were easily measured. The dentition should be orthodontically decompensated and dental midline should ensure incisor midlines positioned in the midline of each jaw before surgical correction. Surgical correction could be considered such as canting or yawing correction in the frontal or horizontal aspect, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.6 no.1
• /
• pp.51-60
• /
• 1986

With the improvement of the accuracy of EDM and theodolite, three-dimensional geodetic coordinates can be determinated by means of analytical Intersection & Resection using vector approach. In this paper the accuracy of Resection, Intersection and Multilateration, by which the geodetic coordinates of a unknown point are determinated using the geodetic coordinates, horizontal angles, vertical angles, and slope distances to a known point are analyzed. As a result, it is found that the solution of multilateration method converges into an allowable limit and the method is better than other two methods in accuracy. And it is found that if the known points are over five points, the solution of Resection and Intersection method can also converge into an allowable limit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1697-1702
• /
• 2017

This paper proposes a forward vehicle movement estimation algorithm for the image-based forward collision warning. The road region in the acquired image is designated as a region of interest (ROI) and a distance look up table (LUT) is made in advance. The distance LUT shows horizontal and vertical real distances from a reference pixel as a test vehicle position to any pixel as a position of a vehicle on the ROI. The proposed algorithm detects vehicles in the ROI, assigns labels to them, and saves their distance information using the distance LUT. And then the proposed algorithm estimates the vehicle movements such as approach distance, side-approaching and front-approaching velocities using distance changes between frames. In forward vehicle movement estimation test using road driving videos, the proposed algorithm makes the valid estimation of average 98.7%, 95.9%, 94.3% in the vehicle movements, respectively.