• Journal of Korean Dental Science
• /
• v.15 no.1
• /
• pp.19-30
• /
• 2022

Purpose: The purpose of the study was to assess the validity of three-dimensional (3D) facial scan taken with facial scanner and digital photo wrapping on the cone-beam computed tomography (CBCT). Materials and Methods: Twenty-five patients had their CBCT scan, two-dimensional (2D) standardized frontal photographs and 3D facial scan obtained on the same day. The facial scans were taken with a facial scanner in an upright position. The 2D standardized frontal photographs were taken at a fixed distance from patients using a camera fixed to a cephalometric apparatus. The 2D integrated facial models were created using digital photo wrapping of frontal photographs on the corresponding CBCT images. The 3D integrated facial models were created using the integration process of 3D facial scans on the CBCT images. On the integrated facial models, sixteen soft tissue landmarks were identified, and the vertical, horizontal, oblique and angular distances between soft tissue landmarks were compared among the 2D facial models and 3D facial models, and CBCT images. Result: The results showed no significant differences of linear and angular measurements among CBCT images, 2D and 3D facial models except for Se-Sn vertical linear measurement which showed significant difference for the 3D facial models. The Bland-Altman plots showed that all measurements were within the limit of agreement. For 3D facial model, all Bland-Altman plots showed that systematic bias was less than 2.0 mm and 2.0° except for Se-Sn linear vertical measurement. For 2D facial model, the Bland-Altman plots of 6 out of 11 of the angular measurements showed systematic bias of more than 2.0°. Conclusion: The facial scan taken with facial scanner showed a clinically acceptable performance. The digital 2D photo wrapping has limitations in clinical use compared to 3D facial scans.

• Journal of Biosystems Engineering
• /
• v.5 no.2
• /
• pp.26-39
• /
• 1980

A study was investigated to find out the mechanical optimum conditions of power tiller-plow system on both paddy field and upland. Mathematical model was developed for the theoretical analysis of this system and the experimentation on the field was carried out with two different sizes of 5PS and 8PS power tiller equipped with rubber tire. 1) The relationship between the plowing depth and draft resistance of the power tiller-plow system was a quadratic function. 2) The minimum point of the specific draft resistance of the 5 PS plow was found at the smaller plowing depth than that of 8 PS plow, therefore we can find that the curved surface of 5PS plow bottom should be improved for the effective plowing operation. 3) As the improvement of the mechanical balance by the desirable change of the curved surface of plow bottom, the relative position of hitch point and dimension of plow beam would be realized, the 5 PS power tiller could be used to plow deeply (about 16-17cm). 4) The virtual acting point of the total draft resistance on the plow bottom approached to the land side as the plowing depth increased. 5) The resultant of vertical reaction force $R_2$ on the landside was increased with the plowing depth, while the vertical reaction force $R_1$ on the wheel was decreased as the slope angle of the body of power tiller increased. 6) For the effective plowing operations ; a) The slope angle of the body should be as small as possible. b) The diameter of the wheel should be as small possible. c) The horizontal and vertical distances $l_2, h_1$ between the wheel axis and plow bottom should be as large as possible. 7) To use the 5PS power tiller as the major unit of agricultural machinery, the curved surface of the 5 PS plower bottom and the mechanism of attachment between the power tiller and the plow should be changed as the indications of this study, and in addition to these, the new operation method of the field work should be developed.

• Journal of Oral Medicine and Pain
• /
• v.42 no.4
• /
• pp.109-115
• /
• 2017

Purpose: This study analyzed the effects of digastric muscle injury on mandibular growth in young rats. Methods: Fourteen 4-week-old Wistar rats were divided into 3 groups; experimental group A (n=6) with unilateral (right) shortening of the posterior digastric muscle, experimental group B (n=6) with bilateral shortening of the posterior digastric muscles, and control group C (n=2) who underwent a sham operation. Eight weeks after the operation all animals were sacrificed and the outcomes were compared using body weight evaluation, mensurations on lateral radiograph of hemimandibles and histological evaluation. Results: There was no significant difference between groups A and B in body weight gain. Comparison of the mean values of hemimandible distance on radiograph was performed. The difference in group mean value of mandible-related distances was analyzed using the Wilcoxon test (rank sum test) and a comparison of the homonymous distances of group A and B was performed using the Mann-Whitney test. There were differences between sides in mandibular length in group B and mandibular ramus height and transverse width of the condyle in group A (all, p<0.05). There were differences in condylar height and mandibular length on the left side between groups A and B (p<0.05). Histologic examination of temporomandibular joint showed similar findings in all specimens. Conclusions: Injury of the posterior belly of the digastric muscle during the rat growth period induced shortening of mandibular ramus height and transverse width of the condyle. It can be inferred that trauma to the posterior belly of the digastric muscle affects horizontal and vertical growth of the mandible.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.8
• /
• pp.748-757
• /
• 2015

MIMO systems utilizing multiple antenna transmission and reception is one of the key technologies to enhance the capacity of 5G wireless communications. In order to obtain an appropriate performance evaluation of MIMO techniques, the usage of wireless channel model reflecting spatial channel characteristics is required, such as the 3-dimensional spatial channel model(3D SCM) proposed by 3GPP TR36.873 documentation. In this paper, we implement and verify the channel simulation environment based on 3D SCM, to present and compare the characteristics of UMi and UMa environments. We also apply MIMO transmission to the UMa scenario to investigate the channel correlation among antenna elements with different array distances and to identify the corresponding throughput changes. By evaluating the channel power correlations for randomly distributed users within the sector for different horizontal and vertical antenna distances, we present the statistical characteristics which determine the transmission performance under the SCM environment.

• Journal of Ecology and Environment
• /
• v.30 no.4
• /
• pp.347-356
• /
• 2007

The structure and dynamics of Korean red pine stands established in the riparian zone were studied in the Tsang stream in Mt. Seorak National Park, in east-central Korea. Pine stands were classified into four successional stages, the initial, establishing, competitive, and stabilizing stages, based on the age distribution of a dominant tree, Pinus densiflora, the vegetation stratification, and the microtopography of the riverine environment. The stages usually corresponded to disturbance frequencies, depending on the horizontal and vertical distances from the watercourse. Stands of the initial and establishing stages lacked tree or subtree layers, or both. As stands progressed through the developmental stages, soil particle size became finer and moisture retention capacity was improved. The stand ordination reflected the developmental stage, and the species ordination differentiated species specializing in relatively dry and wet habitats. The results of the analysis of vegetation dynamics provided ecological information which will be useful for understanding the developmental processes of vegetation established in riparian zones. Species diversity indices usually increased across developmental stages, following the typical pattern for successional processes. We discuss the importance and necessity of riparian vegetation in Korea, where most riparian forests have disappeared due to excessive human land use.

• Wind and Structures
• /
• v.33 no.6
• /
• pp.437-446
• /
• 2021

As wind turbine rotors increase, the overall loads and dynamic response become an important issue. This problem is augmented by the exposure of wind turbines to severe atmospheric events with unconventional flows such as tornadoes, which need specific designs not included in standards and codes at present. An experimental study was conducted to analyze the loads induced by a tornado-like vortex (TLV) on horizontal-axis wind turbines (HAWT). A large-scale tornado simulation developed in The Wind Engineering, Energy and Environment (WindEEE) Dome at Western University in Canada, the so-called Mode B Tornado, was employed as the TLV flow acting on a rigid wind turbine model under two rotor operational conditions (idling and parked) for five radial distances. It was observed that the overall forces and moments depend on the location and orientation of the wind turbine system with respect to the tornado vortex centre, as TLV are three-dimensional flows with velocity gradients in the radial, vertical, and tangential direction. The mean bending moment at the tower base was the most important in terms of magnitude and variation in relation to the position of the HAWT with respect to the core radius of the tornado, and it was highly dependent on the rotor Tip Speed Ratio (TSR).

• Wind and Structures
• /
• v.34 no.3
• /
• pp.303-312
• /
• 2022

As wind turbine rotors increase, the overall loads and dynamic response become an important issue. This problem is augmented by the exposure of wind turbines to severe atmospheric events with unconventional flows such as tornadoes, which need specific designs not included in standards and codes at present. An experimental study was conducted to analyze the loads induced by a tornado-like vortex (TLV) on horizontal-axis wind turbines (HAWT). A large-scale tornado simulation developed in The Wind Engineering, Energy and Environment (WindEEE) Dome at Western University in Canada, the so-called Mode B Tornado, was employed as the TLV flow acting on a rigid wind turbine model under two rotor operational conditions (idling and parked) for five radial distances. It was observed that the overall forces and moments depend on the location and orientation of the wind turbine system with respect to the tornado vortex centre, as TLV are three-dimensional flows with velocity gradients in the radial, vertical, and tangential direction. The mean bending moment at the tower base was the most important in terms of magnitude and variation in relation to the position of the HAWT with respect to the core radius of the tornado, and it was highly dependent on the rotor Tip Speed Ratio (TSR).

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.04a
• /
• pp.275-280
• /
• 1999

It was analysed the effect of pipe cooling as a measure to avoid thermal cracks due to the heat of hydration during the curing process of a massive prestressed concrete (PSC) slab. PSC slab has a complex three-dimensional shape of which the maximal and minimal thicknesses of cross-section were 2.8 and 0.95m, respectively. Steel pipes of which the diameter was 1 inch were employed for cooling. The horizontal and vertical distances between the contiguous pipes were 0.5 and 0.6m, respectively. One the four layers of cooling pipe were arranged according to the thickness of cross-section. Temperature distribution was calculated by the program developed by the authors, of which the accuracy was verified on a few published papers by the authors. Based on the temperature analysis of the cross-section which had four layers of cooing pipe, the maximum temperature of concrete interior was 54.2$^{\circ}C$ and the maximum differenced between the interior and surface temperatures of concrete was 14.$0^{\circ}C$ and, thereby, the thermal cracking index was 1.1. Upon the stress analysis, the thermal cracking index was 0.92 and the probability of thermal-crack development was 52%. Therefore, it was expected to make it possible to reduce the probability of thermal-crack development in a massive PSC slab by adopting pipe cooling.

• Geomechanics and Engineering
• /
• v.27 no.5
• /
• pp.419-431
• /
• 2021

Construction of retaining walls with geocell has been gaining in popularity because of its easy and fast installation compared to conventional methods. In this study, model tests were conducted by constructing the geocell retaining wall (GRW) at a constant height (i.e., 90 cm) and using aggregate as an infill material at four different configurations and two different surface angles. In these tests, a circular footing was placed behind the walls at different lateral distances from the wall surface and loaded monotonically. Subsequent to this vertical loading being applied to the footing, horizontal displacements on the GRW surface were measured at three different points. The performance of Type 4 GRW exceeded the other three types of GRW, with the highest lateral displacement occurring in Type 4 GRW at approximately 0.67 % of wall height. In addition, the results of these tests were compared with theoretical approaches widely accepted in the literature. The stress levels reached beneath the footing were found to be compatible with theoretical results.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.7 no.1
• /
• pp.33-40
• /
• 1980

The author observed the eruption pattern of the mandibular premolars. For this study the author took 406 cases of oblique cephalographs of 6 to 12 year old children. The measurement were with regard to the vertical and horizontal dimensional changes and tooth axis changes to the occlusal plane. The following results were obtained. 1. At stage V the tooth axis of 1st premolar inclined mesially to the occlusal plane, as the tooth erupt toward vertically the angulation changed that at stage X the tooth axis almost right angle to the occlusal plane. 2. The distance from the root apex of premolars to the lower border of mandible were slightly increased to the stage VII, while after stage VII rapid increasing appeared. At stage X the distance of 1st premolar was more longer than 2nd premolar. 3. The distance from the mesial surface of 1st molar to the mesial surface of premolars were decreased slightly to the stage VII, but this distances were decreased rapidly after stage VII. 4. The distance between distal surface of 1st premolar and mesial surface of 2nd premolar was almost constant before stage VIII, at stage IX this distance was little presented because the premolars were contacted.