• Title/Summary/Keyword: homogeneous precipitation

Search Result 178, Processing Time 0.035 seconds

Derivation of IDF Curve by the Simulation of Hourly Precipitation using Nonhomogeneous Markov Chain Model (비동질성 Markov 모형에 의한 시간강수량 모의발생을 이용한 IDF 곡선의 유도)

  • Moon, Young-Il;Choi, Byung-Kyu;Oh, Tae-Suk
    • 한국방재학회:학술대회논문집
    • /
    • 2008.02a
    • /
    • pp.501-504
    • /
    • 2008
  • A non-homogeneous markov model which is able to simulate hourly rainfall series is developed for estimating reliable hydrological variables. The proposed approach is applied to simulate hourly rainfall series in Korea. The simulated rainfall is used to estimate the design rainfall and compared to observations in terms of reproducing underlying distributions of the data to assure model's validation. The model shows that the simulated rainfall series reproduce a similar statistical attribute with observations, and expecially maximum value is gradually increased as number of simulation increase.

  • PDF

Preparation of Ce0.8Gd0.2O1.9 Powder by Milling of CeO2 Slurry and Oxalate Precipitation (CeO2 슬러리 분쇄와 옥살산 침전을 이용한 Ce0.8Gd0.2O1.9 분말의 합성)

  • Sim, Soo-Man
    • Journal of the Korean Ceramic Society
    • /
    • v.47 no.2
    • /
    • pp.183-188
    • /
    • 2010
  • $Ce_{0.8}Gd_{0.2}O_{1.9}$(GDC20) powder was synthesized by milling of $CeO_2$ slurry and Gd oxalate precipitation. The mixture of $CeO_2$ powder and Gd precipitates calcined at $600^{\circ}C$ for 2 h showed the particle size distribution similar to that of $CeO_2$ powder, which had been milled during the synthesis process. Attrition milling of the calcined powder with an average particle size of $0.36\;{\mu}m$ for 2 h resulted in a decrease in the particle size to $0.24\;{\mu}m$. Although the milled powder consisted of small particles(<$1\;{\mu}m$), a small amount of fine platy $Gd_2O_3$ particles, which had been survived in the milling process, was observed. Sintering of the powder compacts for 4 h showed relative densities of 80.7% at $1300^{\circ}C$ and 97% at $1400^{\circ}C$, respectively. Densification was found to almost complete at $1500^{\circ}C$, resulting in a dense and homogeneous microstructure with a relative density of 99.5%.

Sensitivity of a hydrological model to areal precipitation estimates: impacts on precipitation data selection considering homogeneous rainfall regions (강우특성의 동질성을 고려한 유역 평균 강우량이 수문모형의 성능 개선에 미치는 영향 평가)

  • Jung-Hun Song;Hakkwan Kim
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.351-351
    • /
    • 2023
  • 강우 자료는 수문 모델링에서 중요한 입력 요소 중 하나이다. 강우의 공간적 가변성은 모델링 불확실성의 중요한 원인으로 알려져 있다. 강우 관측자료는 많은 경우 유역을 대표하는 평균 면적강수량 (Mean Areal Precipitation, MAP)을 계산하여 수문모형에 입력된다. 선행 연구에서는MAP 예측 결과의 신뢰도를 개선하기 위하여 다양한 보간 방법이 개발되었다. 하지만, 강우특성의 동질성를 고려한 대표 기상 관측소 선정이 MAP 예측과 유출량 모의 결과에 미치는 연구는 아직 미흡한 실정이다. 본 연구에서는 유역의 MAP 예측에 있어 강우특성의 동실성을 고려한 강우 관측소 선정이 수문 모델링 성능 개선에 미치는 영향을 평가하고자 한다. 본 연구에서는 종관 기상관측(ASOS) 74개 지점과 방재기상관측(AWS) 400여개 지점에서 2003~2022년 기간에 대한 일강수량 자료를 수집하였고 강우특성이 동질한 지역을 구분하였다. 또한, 강우특성 동질성의 고려 유무에 따른 MAP를 계산하였다. 이후, 5개의 매개변수로 이루어진 개념적 강우-유출 모형FPHM을 사용하여 우리나라 전역 41개 유역을 대상으로 MAP 계산 결과가 모형 성능에 미치는 민감도를 조사하였다. 분석 결과, 강우특성의 동질성을 고려한 강우 관측소의 선택은 MAP 보간 방법 이상으로 중요한 요소임을 확인할 수 있었다.

  • PDF

Methodology of Genetic Engineering (遺傳工學의 方法論)

  • 이평우;윤경하;이세영
    • Korean Journal of Microbiology
    • /
    • v.13 no.2
    • /
    • pp.71-80
    • /
    • 1975
  • The neurotoxin of Clostridium botulinum type B was purified from a liquid culture. The purification steps consist of ammonium sulfate precipitation of whole culture, treatment of Polymin P(0.15%, v/v), gel filtration on Sephadex G-100 at pH5.6 and DEAE-Sephadex charomatography at pH8.0. The procedure recovered 17% of the toxin assayed in the starting culture. The toxin was homogeneous by sodium dodecyl sulfate(SDS)-polyacrylamide gel electrophoresis and had a molecular weight of 163,000. Subunits of 106,000 and 56,000 molecular weight were found when purified toxin was treated with a disulfide-reducing agent and electro phoresed on SDS-polyacrylamide gels.

  • PDF

Sintering Behavior of Al2O3-15v/o ZrO2(+3m/o Y2O3) Ceramics Prepared by Precipitation Method (침전법으로 제조한 Al2O3-15v/o ZrO2(+3m/o Y2O3)계 세라믹스의 소결거동)

  • 홍기곤;이홍림
    • Journal of the Korean Ceramic Society
    • /
    • v.26 no.3
    • /
    • pp.423-437
    • /
    • 1989
  • Al2O3/ZrO2 composites were prepared by precipitation method using Al2(SO4)3.18H2O, ZrOCl2.8H2O and YCl3.6H2O as starting materials and NH4OH as a precipitation agent. Al2O3/ZrO2 composites(series A) were prepared by mixing Al2O3 powder obtained by single precipitation method with ZrO2(+3m/o Y2O3) powder obtained by co-predipitation method. Al2O3/ZrO2 composites (series B) were prepared by co-precipitation method using the three starting materials. In all cases, the composition was controlled as Al2O3-15v/o ZrO2(+3m/o Y2O3). The composites of series A showed higher final relative densities than those of series B and tetagonal ZrO2 in all cases was retained to about 95% at room temperature. ZrO2 particles were coalesced more rapidly in grain boundary of Al2O3 than within Al2O3 grain. ZrO2 particles were located at 3-and 4-grain junction of Al2O3 and limited the grain growth of Al2O3. It was observed that MgO contributed to densification of Al2O3 but limited grain growth of Al2O3 by MgO was not remarkable. In all Al2O3/ZrO2 composites, exaggerated grain growth of Al2O3 was not observed and Al2O3/ZrO2 composites were found to have homogeneous microstructures.

  • PDF

Sintering Behavior and Mechanical Strength of Hydroxyapatite/Polyacrylic Acid Homogeneous Composite (Hydroxyapatite/Polyacrylic Acid 균질복합체의 소결 특성 및 기계적 강도)

  • 이병교;이석기;구광모;이미혜;이형동
    • Journal of the Korean Ceramic Society
    • /
    • v.40 no.6
    • /
    • pp.566-571
    • /
    • 2003
  • Hydroxyapatite (HAp)/Polyacrylic Acid(PAA) homogeneous composites of four different composition ratio were preparation by co-precipitation process with synthetic HAp and PAA as a binder. HAP/PAA composites were molding by cold isostatic pressing and were sintering by various condition in air. Crystallinity and structure of sintered HAp/PAA composites were investigated by XRD and FT-IR. Also, the compressive strength and the fracture surface of sintered specimens were measured by UTM and SEM. HAp/PAA composites were showed phase transformation of partially ${\alpha}$, ${\beta}$-tricalcium phosphate at sintering condition of 1200$^{\circ}C$ and 3 h. The pore size and porosity of sintered body were showed the range of 0.2∼3.0 $\mu\textrm{m}$ and 0.49∼13.43%, respectively. The compressive strength of sintered specimens were appeared the range of 36.6∼58.2 MPa. From these results, the sintered HAp/PAA comosites can be accounted for the microporous HAp having a good compressive strength due to homogeneous pore morphology.

Dispersion Stability of Rutile TiO2Powder Obtained by Homogeneous Precipitation Process at Low Temperature (저온균일침전법으로 제조된 루틸상 TiO2분말의 분산 안정성)

  • 배현숙;박순동;김흥희;이창규;김선재
    • Journal of the Korean Ceramic Society
    • /
    • v.39 no.1
    • /
    • pp.38-44
    • /
    • 2002
  • Dispersion stability of nano-sized rutile TiO$_2$powder with acicular typed primary particle produced by homogeneous precipitation process at low temperatures was studied in aqueous and non-aqueous media in the presence of various electrolytes. The zeta potential measurements have shown that the addition of electrolytes to aqueous and non-aqueous dispersion media leads to charge reversal on TiO$_2$particle surface. The electrostatic repulsive forces acting on between TiO$_2$particles dispersed in non-aqueous media were found to be significantly greater than that in aqueous media, which relate closely to the physical properties of the organic solvents, such as viscosities and dielectric constants. The pH values, the concentration of electrolytes and the valence of the ions have changed greatly the surface potential of TiO$_2$ particles and have governed the dispersion behavior of TiO$_2$particles virtually.

Synthesis of Boehmite by Hydrothermal Homogeneous Precipitation Reaction (수열균일 침전반응에 의한 Boehmite 합성)

  • Ham, Yong-Mook;Kim, Jo-Woong;Choi, Choul-Ho
    • Applied Chemistry for Engineering
    • /
    • v.2 no.2
    • /
    • pp.119-126
    • /
    • 1991
  • This investigation was undertaken to study the synthesis of Boehmite by the hydrothermal homogeneous precipitation reaction of alum with urea. The reactions were carried out at a temperature of 100 to $250^{\circ}C$, 1 : 2 to 1 : 5 in a mole ratio of alum to urea and a reaction time of 0.5 to 20 hrs. The reaction precipitates were examined by X-ray diffraction analysis, scanning electron microscope, and chemical analysis. Under the condition of mole ratio 1 : 4 of alum to urea, the spherical and monodispersed amorphous aluminum sulfate hydrate was formed at $100^{\circ}C$, the mixture of spherical amorphous aluminum sulfate hydrate and Boehmite was formed at $150^{\circ}C$, Boehmite was formed at above $200^{\circ}C$, respectively. The reaction precipitates were dense, superior precipitable and filterable particle of average $2-4{\mu}m$.

  • PDF

Characterizations of Photo-Oxidative Abilities of Nanostructured TiO2 Powders Prepared with Additions of Various Metal-Chlorides during Homogeneous Precipitation (균일침전시 여러 가지 금속염화물들을 첨가하여 제조된 TiO2 나노 분말들의 광산화 능력 평가)

  • Hwang D. S;Lee N. H;Lee H. G;Kim S. J
    • Korean Journal of Materials Research
    • /
    • v.14 no.4
    • /
    • pp.293-299
    • /
    • 2004
  • Transition metal ions doped $TiO_2$ nanostructured powders were prepared with simply heating aqueous $TiOCl_2$ solutions, contained various metal ions (Ni, Al, Fe, Zr, and Nb) of 1.47 mol% added as metal-chlorides, at $100^{\circ}C$ for 4 hrs by homogeneous precipitation process under suppressing conditions of water vaporization. The characterizations for prepared $TiO_2$ powders were carried out to observe doping of metal ions, their concentrations and microstructures using XRD, UV-VIS (DRS), XPS, SEM, TEM and ICP. Also, photo-oxidative abilities were evaluated by decomposition of 4-chlorophenol (4CP) under ultraviolet light irradiations. No secondary oxide phases were formed in all the $VTiO_2$ powders, showing doping with various transition metal ions. When adding ions ($Ni^{2+}$ or$ Al^{3+ }$ and $Zr^{4+}$ ) having valance states or ionic radii greatly different from those of $Ti^{4+}$ , the $TiO_2$ powders of mixed anatase and rutile phases were formed, whereas in the case of additions of $^Fe{3+ }$ and $Nb^{ 5+}$ as well as no addition of metal ion the powders with pure rutile phase alone were formed. Among the prepared $TiO_2$ powders, Ni$^{2+}$ doped $TiO_2$ powders, containing a small amount of anatase phase, showed excellent photo-oxidative ability in 4CP decomposition because of relative decreases in electron-hole recombination and poisoning of $TiO_2$ surface during the photoreaction.n.