• Advances in materials Research
• /
• 제5권2호
• /
• pp.121-130
• /
• 2016

In an attempt to reach a balance of performances in homo-polypropylene based system, the effects of single and hybrid reinforcements inclusions comprising calcium carbonate nanoparticles (2, 4 and 6 phc) and glass fibers (10 wt.%) on the mechanical and thermal properties were investigated. Different samples were prepared by employing twin-screw extruder and injection molding machine. In morphological studies, the uniform distribution of glass fibers in PP matrix, relative adhesion between glass fibers and polymer, and existence of nanoparticles in polymer matrix were observed. $PP/CaCO_3$ (6 phc) as compared to pure PP and PP/GF had superior tensile and flexural strengths, impact resistance and deformation temperature under load (DTUL). $PP/GF/CaCO_3$ (6 phc) composite displayed comparable tensile and flexural strengths and impact resistance to neat PP, while its tensile and flexural moduli and deformation temperature under load (DTUL) were 436%, 99% and $26^{\circ}C$greater respectively. The maximum impact resistance was observed in $PP/CaCO_3$(6 phc). The highest DTUL was perceived in PP hybrid nanocomposite containing 10 wt.% glass fiber and 4 phc $CaCO_3$ nanoparticle.

• 공업화학
• /
• 제24권4호
• /
• pp.396-401
• /
• 2013

Benzo[1,2,5]thiadiazole, carbazole 및 phenanthrene을 기본 골격으로 한 교대공중합체인 poly[9-(2-octyl-dodecyl)-9H-carbazole-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PCD20TBT)와 poly[9,10-bis-(2-octyl-dodecyloxy)-phenanthrene-alt-4,7-di-thiophen-2-yl-benzo[1,2,5]thiadiazole] (PN40TBT)을 Suzuki coupling reaction을 이용하여 중합하였다. 합성한 고분자들은 chloroform, chlorobenzene, 1,2-dichlorobenzene, tetrahydrofuran, toluene과 같은 유기용매에 대한 용해도가 우수하였다. PCD20TBT의 최대흡수 파장과 밴드갭은 각각 535 nm와 1.75 eV이고, PN40TBT의 최대흡수 파장과 밴드갭은 각각 560 nm과 1.97 eV이었다. PCD20TBT의 HOMO 및 LUMO 에너지준위는 각각 - 5.11 eV와 - 3.36 eV이고, PN40TBT의 HOMO 및 LUMO 에너지준위는 각각 -5.31 eV와 -3.34 eV이었다. 합성한 고분자와 (6)-1-(3-(methoxycarbonyl)-{5}-1-phenyl[5,6]-fullerene(PCBM)을 1:2의 중량비로 블랜딩하여 제작한 이종접합형태(bulk heterojunction) 태양전지를 제작하였다. PCD20TBT의 광전변환효율은 0.52%, PN40TBT의 광전변환효율은 0.60%이었다. 그리고 소자의 단락 전류밀도, 충진 인자와 개방전압은 PCD20TBT가 각각 $-1.97mA/cm^2$, 38.2%, 0.69 V이며, PN40TBT의 경우 각각 $-1.77mA/cm^2$, 42.9%, 0.79 V이었다.

• Bulletin of the Korean Chemical Society
• /
• 제30권9호
• /
• pp.1933-1938
• /
• 2009

New $\pi$-conjugated polymer with vinylene linkage, poly((10-hexyl-3,7-phenothiazine)-alt-(4-(4-butyl-phenyl)- 3,5-diphenyl-4H-[1,2,4]triazole)-3,5-vinylene) (PTV-TAZ) was synthesized by the Heck coupling reaction. The photoluminescence (PL) maximum wavelength and the band gap energy of PTV-TAZ film were 555 nm and 2.41 eV, respectively. The HOMO energy level of PTV-TAZ was -4.99 eV, which was slightly lower than that of PTV (-4.89 eV). Electron deficient aromatic 1,2,4-triazole (TAZ) in the polymer backbone does not affect the HOMO energy level significantly. The maximum efficiency and brightness of double layer structured electroluminescent (EL) device (ITO/PEDOT (30 nm)/PTV-TAZ (60 nm)/Al) were 0.247 cd/A and 553 cd/$m^2$, respectively, which were significantly higher than those of the device based PTV (1.65 ${\times}\;10^{-4}$ cd/A and 4.3 cd/$m^2$). This is due to that TAZ unit improves electron transporting ability in the emissive layer. The turn-on voltage (defined as the voltage required to give a luminescence of 1 cd/$m^2$) of brightness of the device based on PTV-TAZ was 12.0 V, which was similar to that the based on PTV (11.5 V). This is due to that the ionization potential of PTV-TAZ is very similar to that of PTV.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.937-939
• /
• 2003

We synthesized and characterized new fluorene-based polyquinoxalines with ether-linkage in the main chain, which have luminescent properties. Cyclic voltammetry reveals that these polymers have a low-lying LUMO and HOMO energy levels. Therefore, the polymers would be attractive candidates for electron-tansporting or hole-blocking materials in LEDs.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.155-155
• /
• 2006

The most commercially and academically advanced catalysts of late transition metals are diimine complexes based on Pd(II)/Ni(II) and bis(imino)pyridyl complexes based on Fe(II)/Co(II). It is well known that the former systems yield branched polyethylenes and the latter linear PEs. In this presentation, effect of extremely bulky ligands with electron withdrawing/donating substituents at a remote position from Ni(II) metal center and of using multi-nuclear homo or hetero multi-metal on the ethylene polymerization is to be paged.

• Macromolecular Research
• /
• 제16권6호
• /
• pp.544-548
• /
• 2008

An HPLC column with a self-contained temperature control device was constructed for preparative temperature programmed interaction chromatography. Two Peltier plates were attached to a large bore column ($120{\times}22\;mm$ i.d.) and the column temperature was controlled by PID mode feed back control. At a flow rate of 1.5 mL/min, the column temperature could be increased and decreased at a rate as high as $50^{\circ}C/min$ and $10^{\circ}C/min$, respectively, which is much faster than using a column jacket and bath/circulator. The rapid heating and cooling rates allows a high repetition rate of chromatographic fractionation. The performance of the temperature controllable column was demonstrated successfully by the fractionation of homo-polymer precursors from diblock copolymers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.129-130
• /
• 2000

The emission color stability of poly(fluorene) derivatives upon thermal annealing or passage of current in an electroluminescent device is affected by the structure of the main chain polymer unit and particularly by the polymer chain end substituents. Proper attention to these features leads to colorfast blue emission in both photo- and electoluminescence. Furthermore, the spectral emission characteristics can be tuned by the incorporation of various comonomers. Preliminary single layer device studies validate the potential utility of poly(fluorene) homo and copolymers for OLED applications.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1451-1456
• /
• 2012

A novel tetrathiafulvalene (TTF)-based main-chain polymer (6TTF-polymer) was successfully synthesized via a condensation polymerization between a newly synthesized dihydroxy TTF derivative and a malonyl chloride, and its chemical structure was characterized by spectroscopic techniques. Molecular weight of the 6TTF-polymer (9,030 g/mol by gel permeation chromatography) was large enough to form the ductile film. The electrochemical and optical properties of the 6TTF-polymer were further estimated by cyclic voltammetry, ultraviolet and photoluminescence spectroscopes. The highest occupied molecular orbital level ($E_{HOMO}$=-4.79 eV) and band-gap energy ($E_g$=1.91 eV) of the 6TTF-polymer suggested that TTF-based polymer could act as a good electron donating material for the optoelectronic applications.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.403-408
• /
• 2005

A new terphenylenevinylene carbazylenevinylene alternating copolymer with the advantage of poly(p-phenylenevinylene) (PPV), poly(p-phenylene )(PPP) and poly(carbazole) was designed, synthesized and characterized. The polymer structure was confirmed by various spectroscopic analyses and the number average molecular weight ($M_n$) of the obtained polymer was 7,800. The resulting polymer was thermally stable with high glass transition temperature ($T_g$) ($150^{\circ}C$), and was readily soluble in common organic solvents. Cyclic voltammetry study revealed that the HOMO and LUMO energy levels of the polymer were 5.37 and 2.47 eV, respectively. The ITO/PEDOT/polymer/AI device fabricated from the polymer emitted bright sky blue light with a maximum peak of around 478 nm. The device showed the maximum brightness of 1,200 nW with a turn-on voltage of 7V.

• 접착 및 계면
• /
• 제9권4호
• /
• pp.30-33
• /
• 2008

블락 고분자 박막과 기판 사이의 계면에 1 nm 두께의 얇은 단일 성분 고분자 나노 계면을 도입함으로써 블락 고분자 나노 구조의 배향을 조절하는 연구가 수행되었다. Polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) 블락 고분자 박막의 나노 구조를 조절하기 위하여 블락 고분자의 각각의 고분자들의 평균 조성을 가지며 한쪽 끝에 히드록시 기를 가지는 단일 성분 고분자인 폴리(4-아세톡시스티렌) (OH-PAS)과 폴리(4-메톡시스티렌) (OH-PMS)를 나이트록사이드를 이용한 라디칼 중합법(nitroxide-mediated radical polymerization, NMP)을 사용하여 성공적으로 합성하였다. 실리콘 웨이퍼 표면과 저압 탈수 반응을 통하여 OH-PAS와 OH-PMS 두 개의 고분자를 성공적으로 표면에 공유결합 하였으며 생성된 두 고분자가 결합된 1 nm 두께의 계면 위에 PS-b-PMMA 블락 고분자 박막을 도포하여 그 나노 구조의 배향을 분석하였다. OH-PMS를 사용하여 제작된 계면의 경우 블락 고분자에 대하여 약 30%의 수직 배향을 보여주었고 OH-PAS를 사용하여 제작된 계면의 경우 수직 배향을 전혀 보여주지 않았고 오직 수평 배향만을 보여주었다. 결과적으로 계면의 화학적 조성을 정밀하게 조절하는 것이 블락 고분자 박막의 나노 구조 배향을 조절하는 데 가장 중요한 요소라고 고려된다.