• Journal of Information Display
• /
• 제12권2호
• /
• pp.101-107
• /
• 2011

To come up with a bistable liquid crystal (LC) device using unpolarized UV light, single-step laser patterning on a photoalignment layer using a photomask was proposed to achieve an equilibrium configuration of LC molecules in contact with a periodically patterned substrate. The patterns were formed by stripes of alternating random planar and homeotropic anchoring on a submicrometer scale in the order of $0.5{\mu}m$. Two possible configurations of bistable LC cells that can be obtained by combining a micropatterned surface formed with alternating random-planar- and homeotropic-alignment with planar- or homeotropic-alignment surfaces were proposed. The alignment properties of the two proposed models were investigated, along with the microscopic switching behavior of micropatterned nematic LC cells.

• 한국전기전자재료학회논문지
• /
• 제13권11호
• /
• pp.950-953
• /
• 2000

Aligning capabilities of nematic liquid crystal(NLC) using an in-situ photo-alignment method with obliquely polarized UV exposure on a polyimide (PI) surface for homeotropic alignment were studied. The high angle for NLC can be measured by obliquely UV exposure of 30°on the PI surface for 10∼20 min. The pretilt angle of NLC generated using the in-situ photo-alignment was higher than that of a conventional photo-alignment method. Finally, we suggest that the control of pretilt angle in NLC with obliquely polarized UV exposure during imidization of the polymer for homeotropic alignment is promising method to generate high pretilt angle.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.502-505
• /
• 2004

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of a SiC (Silicon Carbide) thin film. SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability make SiC an attractive candidate for electronic applications. A homeotropic alignment of nematic liquid crystal by ion beam (IB) exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}$ to $45^{\circ}$ of incident angle. The good LC alignment is maintained by the ion beam alignment method on the SiC thin film surface until annealing temperature of $300^{\circ}C$. Consequently, homeotropic alignment effect of liquid crystal and the good thermal stability by the ion beam alignment method on the SiC thin film layer can be achieved.

• 한국정보전자통신기술학회논문지
• /
• 제14권5호
• /
• pp.362-368
• /
• 2021

본 논문에서는 알킬 사슬 길이에 따른 러빙 처리된 불소화 자기 조립 단분자막(fluorinated self-assembled monolayers; FSAM)의 수직 액정 배향 상태를 보고한다. FSAM의 증착을 위해 간단한 공정인 기체-상 방법이 사용되었다. FSAM의 가시광선 영역대 광학 평균 투과율은 77.63%~78.21%로 75.89%의 투과율을 갖는 기존의 폴리이미드막보다 우수하였다. 또한 프리틸트각 측정과 편광현미경 사진을 통해 FSAM의 우수한 수직 배향 특성을 관찰하였다. 접촉각과 FSAM의 표면에너지 측정을 통해 알킬 사슬 길이에 따른 프리틸트각이 증가하는 것을 확인하였다. FSAM의 높은 광학 투과율과 균일한 수직 배향 특성은 FSAM이 액정 배향막으로서의 가능성을 보여주었다.

• Transactions on Electrical and Electronic Materials
• /
• 제7권6호
• /
• pp.293-296
• /
• 2006

We studied homeotropic alignment effect for a nematic liquid crystal (NLC) on the $SiO_{x}$ thin film irradiated by the new ion beam method. $SiO_{x}$ thin films were deposited by plasma enhanced chemical vapor deposition (PECVD) and were treated by the DuoPIGatron ion source. A uniform liquid crystal alignment effect was achieved over 2100 eV ion beam energy. Tilt angle were about $90^{\circ}$ and were not affected by various ion beam energy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.67-70
• /
• 2003

The control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC ($\Delta\varepsilon$ >0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The tilt angle of positive type NLC ($\Delta\varepsilon$ >0) is smaller than that of the negative type ($\Delta\varepsilon$ >0) on rubbed PI with increasing baking temperature and time. We consider that the tilt angle of NLC is decreased due to increasing the steric interaction between horizon component of permittivity $\varepsilon$ = of NLC and the stress of polymer side chain by high temperature.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1185-1187
• /
• 2004

We have studied a liquid crystal (LC) mode, named locked super homeotropic (LSH), where the LCs aligned homeotropically are locked by surrounding walls such as cubic, hexagonal and cylinder. In the device, the vertically aligned LCs tilt down symmetrically around the center of the cell when a voltage is applied and thus it exhibits wide viewing angle. In addition, since the LCs is locked in micro domains the LCs do not flow to the bottom of the panel by gravity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1155-1158
• /
• 2004

Various inorganic alignment layers of nematic liquid crystal (NLC) molecules were investigated. Ar ion beam (IB) irradiation was utilized for alignment method and homogenous and homeotropic orientations with tilt angle were obtained on the suitable inorganic thin films. Proper doping materials were added to diamond-like carbon (DLC) films. In the case of homogeneous alignment, nitrogen doping affected the increase of pretilt angle, while the fluorine bonding in the DLC films was induced the tilted homeotropic alignment cause its extreme hydrophobic property. These results showed that ion beam irradiation method could be applied to the various alignment mode of NLC such as IPS, TN and MVA.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1137-1141
• /
• 2004

In this paper, we have improved a novel ECB mode using bend structure with high tilt angle in the unique condition by Hot plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. We suggest that the development of the novel ECB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of fast response time and high contrast ratio.

• Transactions on Electrical and Electronic Materials
• /
• 제10권4호
• /
• pp.140-142
• /
• 2009

We have investigated the continuous pretilt angle generation for liquid crystals using a rubbing treated mixture layer consisting of homogeneous and homeotropic polyimides. Various pretilt angles in the range from $0^{\circ}$ to $60^{\circ}$ were achieved as a function of the concentration of homeotropic PI. The transmittance characteristics used to measure the pretilt angle showed that the pretilt angles were measured with a high reliability. We observed uniform liquid crystal alignment on the rubbing treated mixture layer.