• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.13-21
• /
• 2003

Ships if 500 gross tonnage and upwards constructed on or after 1 July 2002 shall have an automatic tracking aids according to SOLAS V /19 but existing ships less than 10,000 gross tonnage constructed before 1 July 2002 have potential collision risks due to the lack of automatic plotting devices like as an ATA This paper aims to provide a homemade ATA by developing the tracking algorithm for ATA and to prevent collision incidents by distributing ATA system to coasters.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.2
• /
• pp.5-13
• /
• 2003

Ships of 500 gross tonnage and upwards constructed an or after 1 July 2002 shall have an automatic tracking aids according to SOLAS V/19 but existing ships less than 10,000 gross tonnage constructed before 1 July 2002 have potential collision risks due to the lack of automatic plotting devices like as an ATA. This paper aims to provide a homemade ATA by developing the tracking algorithm for ATA and to prevent collision incidents by distributing ATA system to coasters.

• Journal of the Korean Magnetic Resonance Society
• /
• v.9 no.1
• /
• pp.29-37
• /
• 2005

Intra-cellular drug uptake in Xenopus laevis oocyte has been elucidated using localized MR spectroscopy (MRS) and PFG NMR techniques at a 600 $MH_z$(Bruker, 14.1 T) NMR spectrometer. The localized MRS has been done with a homemade probe, and shows the intra-cellular uptake of nicotinamide. The self-diffusion of the molecule in Xenopus oocyte was obtained by PFG NMR technique. The measured data are well fitted with a linear combination of two exponential functions, which shows that there are two types of drug molecules, intra-and extra-cellular molecules. Diffusion coefficients of intra- and extra-cellular drug molecules are 3.7 $\times$ $10^{-11}$ $\m^{2}/s$and 6.4 $\times$ $10^{-10}$ $\m^{2}/s$, respectively. In the weighting factors there is shown that about 5% of drug molecule is inside the cells. These techniques can be used for drug screening in molecule-, cell-, and tissue-based preclinical test.

• Journal of Internet Computing and Services
• /
• v.21 no.1
• /
• pp.111-117
• /
• 2020

Dessert Ateliers (DA) are small shops that sell high-end homemade desserts such as macaroons, cakes, and cookies, and their popularity is increasing according to the emergence of small luxury trends. Even though each DA sells the same kinds of desserts, they are differentiated by the personality of their pastry chef; thus, there is a need to purchase desserts online that customers cannot see and purchase offline, and thus dessert e-commerce has emerged. However, it is impossible for customers to identify all the information of each DA and clearly understand customers' preferences when buying desserts through the dessert e-commerce. When a dessert e-commerce service provides a DA recommendation service, customers can reduce the time they hesitate before making a decision. Therefore, this paper proposes two kinds of DA recommendation method: a clustering-based recommendation method that calculates the similarity between customers' content and DAs and a dynamic weighting-based recommendation method that trains the importance of decision factors considering customer preferences. Various experiments were conducted using a real-world dataset to evaluate the performance of the proposed methods and it showed satisfactory results.

• The Korean Journal of Community Living Science
• /
• v.28 no.2
• /
• pp.329-340
• /
• 2017

This study investigated the situation of eating meals to identify factors influencing skipping breakfast and types of foods consumed for breakfast among adolescents classified by household type. Adolescents were found to consume mainly homemade meals for breakfast and dinner while consuming institutional foodservice at school for lunch. Percentage of skipping meals among adolescents was different by time of meals, and they skipped meals due to lack of time, which was different according to household type. Main food for breakfast was rice, and percentage of skipping breakfast was the highest in single parent households. Satisfaction of food-related life was lowest in grandparent households. Especially, satisfaction was highest if they had rice for breakfast. For influencing factors on skipping breakfast, social support, eating regularly, concern for origin, and single parent household were found to be significant. For influencing factors on types of foods consumed for breakfast, eating regularly, exercise, satisfaction of food-related life, and concern for food safety among adolescents were found to be significant. If adolescents in grandparent households had rice, they were less likely to skip breakfast.

• Fire Science and Engineering
• /
• v.21 no.3
• /
• pp.104-112
• /
• 2007

Simulators were introduced in education as a tool to make advanced training standardized, less expensive, and without danger to those involved. In 1922 in the Unites States, Edward Link presented his homemade flight simulator, which became common place in both military and civilian aviation, known as the "Link Trainer". The development of mannequin simulators used for medical simulation education, training, and research is reviewed, tracing the motivations, evolution to commercial availability, and efforts toward assessment of efficacy of those for teaching cardiopulmonary resuscitation(CPR) for medical personnel and emergency medical technicians(EMT), cardiology skills, anaesthesia clinical skills, and crisis management. This study will provide a brief overview of simulators and trainers in several domains.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.25-33
• /
• 2013

This study aims to investigate the film performance by physical properties of glue and gelatin in traditional paint(Dancheong). To do this, homemade, commercial glue and gelatin was selected and evaluated water reaction and weatherproof. The result, the highest gel strength, gelatin was better than acrylic acid ester resin, when compared with hygroscopic property and adhesive property. And that was better than in any others, when compared with water-proofing.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.911-917
• /
• 2018

Influence of the adaptors on the calibration of $100{\mu}H$ inductance standard was studied as a function of torque, applied when tightening the standard inductor terminal with the adaptor. Two different homemade adaptors of BPO gold-plated brass (BPO-Au) and banana-copper (BN-Cu) were made for the connection between the LCR meter and the inductance standard. The measured inductance (L) of the standard inductor and the contact resistance ($R_C$) between the adaptor and the standard inductor terminal showed exponential decreases against the torque increase from $25cN{\cdot}m$ to $150cN{\cdot}m$. The measured L and the calculated equivalence series resistance ($R_S$) were dependent on the adaptor type as well as on the $R_C$. The results of the adaptor analysis imply that the BPO-Au adaptor with the lower $R_C$ is more suitable for the inductance calibration. The calculated inductance of $99.956{\mu}H$ corrected by subtraction of the adaptor inductance and the contact resistance contributions from the measured value using the BPO-Au adaptor agreed well with the certificate ($99.948{\mu}H$) of the PTB within the measurement uncertainty of $140{\mu}H/H$.

• Current Optics and Photonics
• /
• v.1 no.5
• /
• pp.525-528
• /
• 2017

High-energy, high-power, quasi-continuous wave (QCW) operation of double-clad Yb fiber lasers incorporating an incoherent signal combiner is reported. We constructed four efficient, high-power Yb fiber lasers, each of which produced rectangular pulses at 1080 nm with a pulse energy greater than 15 J, and a pulse duration of 10 ms at a repetition rate of 10 Hz, corresponding to an average power of over 150 W and a peak power of over 1.5 kW for ~200 W of incident pump power at 915 nm. These laser outputs were combined by a homemade incoherent fiber signal combiner with low loss, yielding a maximum peak power of ~6.0 kW in a beam with $M^2{\approx}12.5$. The detailed laser characteristics and prospects for further power scaling in QCW operation are discussed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.2
• /
• pp.144-154
• /
• 2016

HT-PEMFC (high temperature polymer electrolyte membrane fuel cell) using PA (phosphoric acid) doped PBI (polybenzimidazole) membrane has been researched for extending the lifetime. However, the existing work on durability of HT-PEMFC focuses on identifying degradation causes of lab scale. The short life time of HT-PEMFC is still the problem for its commercialization. In this paper, an operating method to maximize life time of 5kW HT-PEMFC stack are proposed. The proposed method includes major steps such as minimization of OCV (Open Circuit Voltage) exposure, control of the proper stack temperature, and N2 purging for the stack. This long life operating method was based on the fragmentary results of degradation from previous research works. Experimentally, the 5 kW homemade HT-PEMFC stack was operated for a long time based on the proposed method and the stack successfully can operate within the desired degradation rate for the target life time.