• Clinical and Experimental Pediatrics
• /
• v.53 no.5
• /
• pp.616-622
• /
• 2010

Enterovirus 71 (EV71) has been recognized as a frequent cause of epidemics of hand-foot-and-mouth disease (HFMD) associated with severe neurological symptoms. In the spring of 2009, HFMD was epidemic in Korea. Severe cases with complication, including death, have been reported and it has become a public health issue. Most symptomatic EV71 infections commonly result in HFMD or herpangina. These clinical manifestations can be associated with neurologic syndromes frequently. Neurologic syndromes observed in EV71 include meningitis, meningoencephalomyelitis, poliomyelitis-like paralytic disease, Guillain-Barr$\acute{e}$ syndrome, transverse myelitis, cerebellar ataxia, opsoclonus-myoclonus syndrome, benign intracranial hypertension, and brainstem encephalitis. Examinations for EV 71 were performed from the stools, respiratory secretion or CSF of the children by realtime PCR. Gene analysis showed that most of them were caused by EV71 subgenotype C4a which was prevalent in China, 2008. Public health measures including personal and environmental hygiene, must to target daycare centers, kindergartens, and schools where highly susceptible children congregate. To prevent the spread of infection, preschools where transmission persists for more than 2 incubation periods, have been recommended for closure, and trigger criteria for voluntary closure was instituted. During closure, operators are to thoroughly clean the centers before they are allowed to reopen. In addition, parents are advised to ensure that their children adopt a high standard of personal hygiene and to keep the infected child at home until full recovery. Because the outbreaks occur in a cyclical pattern, surveillance system to predict next outbreaks and adequate public health measures to control need to be planned for future. Control of EV71 epidemics through surveillance and public health intervention needs to be maintained in Korea. Future research should focus on understanding of EV71 virulence, identification of the receptor(s) for EV71, development of antiviral agents and development of vaccine.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.05a
• /
• pp.137-142
• /
• 2007

Currently, brand apartment is positioning itself as one of the representative Korean housing. This allows to look into the planning side and cultural side of the Korean housing. The purpose of this study is to review the previous trend in apartment housing according to period, and to verify the trend of current Korean apartment housing by visiting the model houses in PanGyo, the new city. This study has chosen case study method of 11 cases which had been sorted out in different floor plan type and size. The findings of the study is as followed. In the aspect of spatial arrangement, it had been similar to the previous apartment plan but had a new attempt to break out from the old apartment structure by bring in round shaped living room. Also, due to the legalization of balcony expansion, various tries had been made to increase the level of function and to allow variety of usage. In the environmental aspect, the concept of wellbeing and health had been a great importance in apartment planning. In the digital aspect, various digital systems had been introduce for convenience and safety via home network system. Furthermore, based on the various lifestyle, the storytelling design concept applied in the interior design, which will have to effect the future model house design planning. Nonetheless, the current emphasis on universal design is expected to be treated one of the important concept in Korean apartment planning. This study has a significant meaning on readdressing current trend in Korean housing and to provide informations for future directions on Korean apartment planning.

• Human Ecology Research
• /
• v.58 no.3
• /
• pp.357-374
• /
• 2020

This study suggests the use of standardized sewing terms for the construction of smart sewing systems. This study analyzed the use of stitches (ISO 4915) and seams (ISO 4916) for cut and sewn knit garment which are the basic elements of sewing on an ISO basis. The results of the analysis of sewing specifications of cut and sewn knit garments are as follows. First, the use of stitches and seams were analyzed. As a result, both stitches and seams were used as non-standard terms. Second, among 3,263 stitches, ISO 4915 No. 406 followed by 401, 504, 605 were the most frequently used; however, ISO 4915 No. 514 was anticipated the most because the ISO 4915 No. 514 used for joining was not recorded in the sewing specification. Finally, the use of stitch for each seam was analyzed. The most common stitch used for ISO 4916 No. 6.02.07 was ISO 4915 No. 406. In addition, when it was sewing ISO 4916 No. 4.04.01, ISO 4915 No. 504 was used in step 1, and ISO 4915 No. 406, 602, and 605 were used in step 2. It is important to use the international standard sewing terms for the production site based on the results. In addition, the construction of smart sewing systems and the work of international standardization through industry-university cooperation are important for securing global competitiveness. Therefore, the use of international standard terminology and practical training should be conducted with a focus on stitching and seams with high frequency of use.

• Journal of Technologic Dentistry
• /
• v.30 no.2
• /
• pp.105-119
• /
• 2008

This study explored the status of free time activities among the dental technicians who are working at Seoul, Gyonggido, and Gangwondo. On the basis of this research, we aim to present needs and applicable solutions to improve the working conditions and enhance the quality of life through more effective time management in free time activities that lead to their self development and far more enriched life. 500 subjects were randomly chosen and the questionary sheets were provided. Among them, 305 sheets were returned to be analysed through SPSS Win 10.0 software and the results are as follows; First, mean in the satisfaction of leisure activities was 3.44(SD=.73). Mean in sub categories was as follows; psychological factor(M=3.65, SD=.71), social factor(M=3.54, SD=.75), rest factors(M=3.52, SD=.63), physical factor(M=3.43, SD=.88), other factors(M=3.40, SD=.66), circumstantial factor(M=3.33, SD=.63), educational factor(M=3.24, SD=.73). Second, the most relevant sub categories in the satisfaction of leisure activities were social, educational, physical, and other circumstantial factors by sequence. Factors that affect leisure activities satisfaction were career and status of health, which shows statistical significance(p<.001). That is to say, contention of this study is that the general characteristics are closely related with and affect the types and the level of satisfaction in leisure activities of the subjects. Considering these results, the dental businesses and the associations of dental technicians should recognize the needs to improve the time management through more efficient cooperations between dentists and back office dental team, systemized working time, and introduction of incentive system among others. On the basis of this appreciation, the dental business should provide more time and various opportunities with the dental technicians. Dental technicians also need to reconsider their appreciations of leisure activities, that is, leisure activities are not just spending time doing something but they refresh them and enable them to be more active and faithful to home and work.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.2
• /
• pp.153-162
• /
• 2022

Objectives: Fused deposition modeling (FDM) 3D printer which is one of the material extrusion (MEX) technologies is an additive manufacturing (AM) process. 3D printers have been distributed widely in Korea, particularly in school and office, even at home. Several studies have shown that nanoparticles and volatile organic compounds (VOCs) were emitted from an FDM 3D printing process. The objective of this study was to identify types of chemicals possibly emitted from FDM 3D printing materials such as PLA (polylactic acid), ABS (acrylonitrile butadiene styrene), nylon, PETG (polyethylene terephthalate glycol), PVA (polyvinyl alcohol), PC (polycarbonate) filaments. Methods: 19 FDM 3D printing filaments which have been distributed in Korea were selected and analyzed VOCs emitted of 3D printing materials by headspace gas chromatography mass spectrometry (headspace GC-MS). Subsamples were put into a vial and heated up to 200℃ (500 rpm) during 20 minutes before analyzing FDM 3D printing filaments. Results: In the case of PLA filament, lactide and methyl methacrylate, the monomer components of one, were detected, and the volume ratio ranged 27~93%, 0.5~37% respectively. In the case of ABS filaments, styrene (50.5~59.1%), the monomer components of one, was detected. Several VOCs among acetaldehyde, toluene, ethylbenzene, xylene, etc were detected from each FDM 3D printing filaments. Conclusions: Several VOCs, semi-VOCs were emitted from FDM 3D printing filaments in this study and previous studies. Users were possibly exposed to ones so that we strongly believe that we recommend to install the ventilation system such as a local exhaust ventilation (LEV) when they operate the FDM 3D printers in a workplace.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.143-151
• /
• 2010

Currently, one of the most interested things at home and abroad country will be an eco-friendly construction. Among these, one of the most important elements will be the recycle and reuse of construction and demolition waste. Because construction waste is generated the most at the demolition phase, it is important to minimize the quantity of the demolition waste at the phase. And it is also important to develop a system to manage rightly the generated demolition waste. But in the domestic country, a research for this has hardly been carried out. In recent, the government has realized its importance and is making a research to improve demolition technique and is preparing a research to make a raw for deconstruction. Therefore, this study examined its application situation and importance by analyzing the trend of demolition technique used in the domestic industry. Also this study carried out a survey for situation analysis of the demolition industry. This study suggested items needed for the development of demolition technique, demolition design and reduction of C&D waste through a survey results and a situation analysis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.1-7
• /
• 2018

The gases emitted from internal combustion engines using fossil fuels are causing many social problems, such as environmental pollution, global warming, and adverse health effects on the human body. In recent years, the demand for renewable energy has increased, and government policy support and research and development are also active. In the collecting part of a solar energy system, which is widely used at home, propylene glycol (PG) (anti-freeze), as a heating medium, is mixed with water at a fixed value of 50%, and the heat is transferred to the collecting part at subzero temperatures. On the other hand, when leakage occurs in the heat medium in the heat collecting part, supplemental water is supplied to the solar heat collecting part due to the characteristics of the solar heat system, so that the concentration of antifreeze in the replenishing water becomes low. As a result, the temperature of the solar heat collecting part is lowered resulting in a frost wave, which causes economic damage. The purpose of this study was to develop a device capable of controlling the antifreeze concentration automatically in response to a temperature drop to prevent freezing of the heat collecting part generated in the solar energy system. The electrical conductivity of the H2O component was larger than that of PG, and the resistance increased with decreasing temperature. The PG concentration control values of 40, 50, and 60% should be controlled through calibration with a PG concentration of 39.6, 50.7, and 60.1%.

• Journal of Global Scholars of Marketing Science
• /
• v.18 no.4
• /
• pp.61-118
• /
• 2008

The purpose of this research is to construct research framework for international franchising based on existing literature and to identify research components in the framework. Franchise can be defined as management styles that allow franchisee use various management assets of franchisor in order to make or sell product or service. It can be divided into product distribution franchise that is designed to sell products and business format franchise that is designed for running it as business whatever its form is. International franchising can be defined as a way of internationalization of franchisor to foreign country by providing its business format or package to franchisee of host country. International franchising is growing fast for last four decades but academic research on this is quite limited. Especially in Korea, research about international franchising is carried out on by case study format with single case or empirical study format with survey based on domestic franchise theory. Therefore, this paper tries to review existing literature on international franchising research, providing research framework, and then stimulating new research on this field. International franchising research components include motives and environmental factors for decision of expanding to international franchising, entrance modes and development plan for international franchising, contracts and management strategy of international franchising, and various performance measures from different perspectives. First, motives of international franchising are fee collection from franchisee. Also it provides easier way to expanding to foreign country. The other motives including increase total sales volume, occupying better strategic position, getting quality resources, and improving efficiency. Environmental factors that facilitating international franchising encompasses economic condition, trend, and legal or political factors in host and/or home countries. In addition, control power and risk management capability of franchisor plays critical role in successful franchising contract. Final decision to enter foreign country via franchising is determined by numerous factors like history, size, growth, competitiveness, management system, bonding capability, industry characteristics of franchisor. After deciding to enter into foreign country, franchisor needs to set entrance modes of international franchising. Within contractual mode, there are master franchising and area developing franchising, licensing, direct franchising, and joint venture. Theories about entrance mode selection contain concepts of efficiency, knowledge-based approach, competence-based approach, agent theory, and governance cost. The next step after entrance decision is operation strategy. Operation strategy starts with selecting a target city and a target country for franchising. In order to finding, screening targets, franchisor needs to collect information about candidates. Critical information includes brand patent, commercial laws, regulations, market conditions, country risk, and industry analysis. After selecting a target city in target country, franchisor needs to select franchisee, in other word, partner. The first important criteria for selecting partners are financial credibility and capability, possession of real estate. And cultural similarity and knowledge about franchisor and/or home country are also recognized as critical criteria. The most important element in operating strategy is legal document between franchisor and franchisee with home and host countries. Terms and conditions in legal documents give objective information about characteristics of franchising agreement for academic research. Legal documents have definitions of terminology, territory and exclusivity, agreement of term, initial fee, continuing fees, clearing currency, and rights about sub-franchising. Also, legal documents could have terms about softer elements like training program and operation manual. And harder elements like law competent court and terms of expiration. Next element in operating strategy is about product and service. Especially for business format franchising, product/service deliverable, benefit communicators, system identifiers (architectural features), and format facilitators are listed for product/service strategic elements. Another important decision on product/service is standardization vs. customization. The rationale behind standardization is cost reduction, efficiency, consistency, image congruence, brand awareness, and competitiveness on price. Also standardization enables large scale R&D and innovative change in management style. Another element in operating strategy is control management. The simple way to control franchise contract is relying on legal terms, contractual control system. There are other control systems, administrative control system and ethical control system. Contractual control system is a coercive source of power, but franchisor usually doesn't want to use legal power since it doesn't help to build up positive relationship. Instead, self-regulation is widely used. Administrative control system uses control mechanism from ordinary work relationship. Its main component is supporting activities to franchisee and communication method. For example, franchisor provides advertising, training, manual, and delivery, then franchisee follows franchisor's direction. Another component is building franchisor's brand power. The last research element is performance factor of international franchising. Performance elements can be divided into franchisor's performance and franchisee's performance. The conceptual performance measures of franchisor are simple but not easy to obtain objectively. They are profit, sale, cost, experience, and brand power. The performance measures of franchisee are mostly about benefits of host country. They contain small business development, promotion of employment, introduction of new business model, and level up technology status. There are indirect benefits, like increase of tax, refinement of corporate citizenship, regional economic clustering, and improvement of international balance. In addition to those, host country gets socio-cultural change other than economic effects. It includes demographic change, social trend, customer value change, social communication, and social globalization. Sometimes it is called as westernization or McDonaldization of society. In addition, the paper reviews on theories that have been frequently applied to international franchising research, such as agent theory, resource-based view, transaction cost theory, organizational learning theory, and international expansion theories. Resource based theory is used in strategic decision based on resources, like decision about entrance and cooperation depending on resources of franchisee and franchisor. Transaction cost theory can be applied in determination of mutual trust or satisfaction of franchising players. Agent theory tries to explain strategic decision for reducing problem caused by utilizing agent, for example research on control system in franchising agreements. Organizational Learning theory is relatively new in franchising research. It assumes organization tries to maximize performance and learning of organization. In addition, Internalization theory advocates strategic decision of direct investment for removing inefficiency of market transaction and is applied in research on terms of contract. And oligopolistic competition theory is used to explain various entry modes for international expansion. Competency theory support strategic decision of utilizing key competitive advantage. Furthermore, research methodologies including qualitative and quantitative methodologies are suggested for more rigorous international franchising research. Quantitative research needs more real data other than survey data which is usually respondent's judgment. In order to verify theory more rigorously, research based on real data is essential. However, real quantitative data is quite hard to get. The qualitative research other than single case study is also highly recommended. Since international franchising has limited number of applications, scientific research based on grounded theory and ethnography study can be used. Scientific case study is differentiated with single case study on its data collection method and analysis method. The key concept is triangulation in measurement, logical coding and comparison. Finally, it provides overall research direction for international franchising after summarizing research trend in Korea. International franchising research in Korea has two different types, one is for studying Korean franchisor going overseas and the other is for Korean franchisee of foreign franchisor. Among research on Korean franchisor, two common patterns are observed. First of all, they usually deal with success story of one franchisor. The other common pattern is that they focus on same industry and country. Therefore, international franchise research needs to extend their focus to broader subjects with scientific research methodology as well as development of new theory.

• Journal of Arbitration Studies
• /
• v.12 no.1
• /
• pp.271-321
• /
• 2002

Every year, many million of business transactions take place. Ocassionally, disagreements develop over these business transactions. Many of these disputes are resolved by mediation, arbitration and out-of-court settlement options. The American Arbitration Association(AAA) helps resolve a wide range of disputes through mediation, arbitration, elections and other out-of-court settlement procedures. The AAA offers a broad range of dispute resolution services to business executives, attorneys, individuals, trade associations, unions, management, consumers, families, communities, and all level of governments. The 198,491 cases composed of the 194,303 arbitration cases and the 4,188 mediation cases, were filed with the AAA in 2000. These case filings represent a full range of matters, including commercial finance, construction, labor and employment, environmental, health care, insurance, real state, securities, and technology disputes. The Korean Commercial Arbitration Board (KCAB) does more than render arbitration services. It helps facilitate settlements and guarantee implementation thereof between trading partners at home and abroad involving disputes related to such areas as the sale of commodities, construction, joint venture agreements, technical assistance, agency agreements, and maritime transport. The 643 cases composed of the the 197 arbitration cases and the 446 mediation cases, were filed with the KCAB in 2001. There are some differences between the AAA and the KCAB regarding the number and the area of mediation and arbitration case filings, the breath of service offerings, the scope of alternative dispute resolution, and the education and training. In order to apply to the proceedings of the commercial mediation and arbitration, the AAA has the Commercial Mediation Rules, the Commercial Arbitration Rules, the Expedited Procedures, the Optional Procedures for Large, Complex Commerical Dispute, and the Optional Rules for Emergency Measures of Protection as amended and effective on September 1, 2000. In order to apply to the proceedings of commercial arbitration, the KCAB has the Arbitration Rules as amended by the Supreme Court on April 27, 2000, which have been changed to incorporate the revisions of the Arbitration Act that went into effect on December 31, 1999. There are some differences between the AAA's commercial Arbitration Rules and the KCAB's Arbitration Rules regarding the clauses of jurisdiction and administrative conference, number of arbitrators, communication with arbitrator, vacancies, preliminary hearing, exchange of information, oaths, evidence by affidavit and posthearing filing of documents or others, interim measures, serving of notice, form of award, scope of award, delivery of award to parties, modification of award, release of liability, administrative fees, neutral arbitrator's compensation, and expedited procedures. In conclusion, for the vitalization of KCAB and its ADR system, the following measures should be taken : the effective case management, the development of on0-line ADR, the establishment of ADR system of electronic commerce disputes, and the variety of dispute resolution rules in each expert field.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.212-221
• /
• 2013

Objectives: Asbestos fibers are accumulated in negative pressure unit (NPU) or vacuum cleaner in asbestos removal. Failure of operation or poor use performance of the NPU or vacuum cleaner causes asbestos fibers to spread in the air. Asbestos contractors should have an NPU fitted with a HEPA , vacuum cleaner, decontamination area, respirators, wetting equipment, and differential pressure manometer to register with the Ministry of Employment and Labor. There should be performance criteria of equipment used in asbestos removal. But there are none such criteria used in asbestos removal. This study was performed to investigate international or national performance criteria of equipment used in asbestos removal. Methods: Regulations, approved code of practice, guidance and national standards of the UK, USA and Korea were reviewed. A survey was done to investigate the requirements for equipment used in asbestos removal in Korea. Results: Air flow of NPUs used in Korea usually covers from$500m^3/h$ to over $3000m^3/h$. Some requirements for NPUs used in Korea were missing compared to the requirements of British standards for NPUs. All NPUs have different missing requirements. The UK also has separate British standard for leak tests for NPUs. Highly hazardous class vacuum cleaners should be used in asbestos removal in the UK. It has national standards on the operation of vacuum cleaners used in asbestos removal. There is only a certification system for less than 2.5kw rated voltage vacuum cleaners for home use in Korea. Powered (-assisted) respirators with mask are recommended in asbestos removal. Type 5 coveralls should be used in asbestos removal in the UK. There are international standards for requirements and leak tests of type 5 coveralls. A manometer for measuring differential pressure is needed in asbestos removal. The manometer's measuring range should cover less than ${\pm}125$ Pa and the gradation of manometer should be less than 2.5 Pa. The definition of decontamination area should be corrected. Installation of airlock and minimum area should be considered in decontamination area. Conclusions: Equipment should be used in asbestos removal proper performance and no leaks. There should be a certification system for equipment used in asbestos removal. This study can help to a certification system for equipment used in asbestos removal in Korea.