• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.219-220
• /
• 2008

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.203-206
• /
• 2003

This study is focused on proposing a creative system that can display 3D hologram on the real-time basis. This method applies 3D display on volume hologram based on CGH. The process of implementing the system consists of two stages of fringe pattern recording for passive component that includes information on hologram, and irradiating object beam. Distinguished from an existing electronic holographic display system, this system is free from the process of a huge calculation that is necessary to compose CGH for a real-time 3D display.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.101-109
• /
• 1998

In this paper, we implemented holographic optical memory systm which can store and reconstruct many images using new input and angular multiplexing method. In the new input method, phase infomation of input image is inputed in the recording material instead of brightness information. To do so, we represented the images, which captured with CCD camera or displayed on the computer monitor, on the liquid crystal television(LCTV) which removed polarizer/analyzer. Therefore, we can generate uniform input beam intensity regardless of the total brightness of input image, and apply the scheduled recording method. Also we can increase the intensity of input beam so reduce the recording time of input image. And reconstructedimage is acquired by transforming phase information into brightness information of image with analyzer. The incident angle of reference beam is acquired by Fourier transform of the binary phase hologram(BPH) which designed with SA algorithm on the LCTV. The proposed optical memory system is stable because the incident angle of the reference beam is controlled easy and electronically. We demonstreated optical experiment which store and reconstruct various type images in BaTiO$_{3}$ using proposed holographic memory system.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.1-22
• /
• 2005

There are two important trends in the modern information society, including digital networking and ubiquitous environment. Thus it is strongly required to develop new information storage devices such as high density storages to match the increased data capacity and small size storage devices to be applied to the mobile multimedia electronics. So far, many approaches have been studied for the high density memory, including the holographic memory, super-RENS and near-field recording using solid immersion lens (SIL) or nano-probe for the ODD (Optical Disk Drive) system, and the perpendicular magnetic recording and heat-assisted magnetic recording for the HDD (Hard Disk Drive) system. In addition, new mobile storage devices have been prepared using 0.85" HDD and 30mm ODD systems from a lot of foreign and domestic companies and institutes. In this paper, the recent technology trend for the next generation information storage system is summarized to offer a research motivation and encouragement to new researchers in this field with an emphasis on the technical issues of the increase of data capacity and decrease of device size.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.66-70
• /
• 2000

The main problem of image projection on a transmission type holographic screen is color sepa-ration. And it can be overcome by using a long narrow slit type diffuser as a source of the object beam when we record the screen. But that screen is not optimized and so needs changing several conditions. To set up the system many complicate things should be taken into accounted so it is very important to analyze the basic structure by simple concepts and calculations. We designed the system so that recording and projection axis coincide in one line and showed that the analysis of the system is very simple. We did it by a 1st order paraxial approximation calculation and it was good enough to describe the system. The photo-emulsion layer shrinks after processing of the hologram. It induced unsatisfactory color matching at the viewing zone. To overcome this effect, we pre-checked the shrinkage rate of an emulsion layer by experiments and modified the recording set up to compensate for the amount of shrinkage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.92-95
• /
• 2005

The silver photodoping effect in amorphous AsGeSeS chalcogenide thin films for holographic recording has been investigated using a HeNe laser ($\lambda$=632.8 nm). The chalcogenide films prepared in this work were thinner in comparison with the penetration depth of recording light ($d_p$=1.66 mm). The variation of the diffraction efficiency $(\eta)$ in amorphous chalcogende films exhibits a tendency, independently of the Ag photodoping. That is, n increases relatively rapidly at the beginning of the recording process, reaches the maximum $({\eta}_{max})$ and slowly decreases. In addition, the value of ${\eta}_{max}$ depends strongly on chalcogenide film thickness(d) and its peak among the films with d = 40, 80, 150, 300, and 633 nm is observed at d = 150 nm (approximately 1/2n), where n is refractive index of the chalcogenide (n=2.0). The ${\eta}$ is largely enhanced by Ag photodoping into the chalcogenides. In particular, the value of hmax in a bilayer of 10-nm-thick Ag/150-nm-thick AsGeSeS film is about 1.6%, which corresponds to ~20 times in comparison with that of the AsGeSeS film (without Ag).

• 한국광학회지
• /
• 제9권3호
• /
• pp.199-204
• /
• 1998

홀로그램 기록에 있어서 기록저장밀도를 높이기 위해 각다중, 회전다중, 그리고 공간다중, 그리고 공간다중을 동시에 실현할 수 있는 매우 간단한 방식을 제안하고 실험하였다. 각다중과 회전다중은 두 개의 쐐기 프리즘을 이용하여 기준빔을 직접 제어함으로써 얻고, 공간다중은 기록매질을 기록평면에서 이동시킴으로써 얻었다. 기준빔과 물체빔의 사이각도가 예각인 예각기록 구조와 이것이 90$^{\circ}$인 90$^{\circ}$기록구조가 모두 구현될수 있다. 실험에서는 광풀리머를 사용한 예각기록구조로 180개의 홀로그램을 다중기록하였고, 철함유 LiNbO3 광굴절결정을 사용한 90$^{\circ}$기록구조로 147개의 홀로그램을 다중기록하였다. 우리의 방식은 3가지 다중화를 위한 복잡한 기계적 움직임의 제어를 단순함으로써 실질적 홀로그래피 메모리 시스템의 실현을 쉽게 한다.

• 한국광학회지
• /
• 제14권6호
• /
• pp.663-668
• /
• 2003

본 논문에서는 디스크형 기록매질에 이용될 수 있는 국소 홀로그램 기록방식을 연구하였다. 이 방식에서는 원통렌즈를 사용하여 기준빔을 얇은 두께로 집속하고, 그 집속된 곳에 신호빔을 쬐어 홀로그램을 기록한다. 기록매질을 기준빔의 스팟 크기보다 더 많이 이동시킴으로써 여러 개의 국소 홀로그램을 다중화한다. 국소 홀로그램 기록방식은 균일한 회절효율을 위하여 기록시간을 조절할 필요가 없다. 우리는 주어진 신호빔의 스팟 크기에 대해서 요구되는 최저의 기록매질 두께가 존재함을 보였다. Fe가 도핑된 2 mm 두께의 LiNbO$_3$광결정을 사용하여 데이터의 저장 및 복원 실험을 실행하였고, 20 bit/$\mu\textrm{m}$$^2$의 면적 저장밀도와 2.5${\times}$$10^{-3}$의 RBER(raw-bit error rate)을 얻었다.

• 과학교육연구지
• /
• 제34권2호
• /
• pp.203-210
• /
• 2010

본 연구에서는 은염 물질인 Slavich PFG-01을 사용하여 투과형 홀로그래피 회절격자를 제작하고, 고효율의 회절격자 제작을 위한 현상액의 조성 등과 같은 화학적 처리 과정의 조건들을 파악하고, 반전표백과 무정착 은염 재생성 표백에 의한 회절격자의 회절 효율 특성에 대해 알아보았다. 현상액 AAC를 사용하여 반전표백에서 89.0%과 무정착 은염 재생성 표백에서 82.1%의 최대회절효율을 얻었으며, 무정착 은염 재생성 표백의 경우는 반전표백에 비해 높은 노출에너지가 필요함을 알 수 있었다. 기존의 홀로그래피 기록물질인 Agfa 8E75HD나 BB-640로 보고된 회절효율에 비해 더 높은 회절효율 얻을 수 있었으며, 기록물질 특성 차이로 인해 더 높은 노출에너지가 필요함을 알 수 있었다. 한 가지 현상 주약으로 이루어진 현상액에 비해 두가지 현상 주약을 혼합한 경우 더 높은 회절효율을 얻을 수 있었으며, 대체로 반전표백에 비해 무정착 은염 재생성 표백에서 높은 회절효율을 나타내었다.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.70-77
• /
• 2016

This paper proposes an optical system for complex holographic display that enhances the quality of the reconstructed three-dimensional image. This work focuses on a new design for an optical system and the evaluation of the complex holographic display, using a single spatial light modulator (SLM) and a circular grating. The optical system is based on a 4-f system in which the imaginary and real information of the hologram is displayed on concentric rectangular areas of the SLM and circular grating. Thus, this method overcomes the lack of accuracy in the pixel positions between two window holograms in previous studies, and achieves a higher intensity of the real object points of the reconstructed hologram than the original phase-reconstructed hologram. The proposed method provides approximately 30% less NMRS (Normal Root Mean Square) error, compared to previous systems, which is verified by both simulation and optical experiment.