• Journal of the Korean Wood Science and Technology
• /
• v.33 no.6 s.134
• /
• pp.79-86
• /
• 2005

Aspen wood (Populus tremuloides, L.) was biotreated with Ceriporiopsis subvermispora for 1, 2, 4, and 6 weeks to observe the physical/chemical modification of wood components. Milled wood lignins (MWLs) isolated from each decayed wood were analyzed by gel permeation chromatography (GPC) and nitrobenzene oxidation (NBO). As fungal treatment was progressed, lignin contents continuously decreased up to 20% after 6-week treatment. The lignin polymer could be fragmented to low-molecular phenolics, which make an enhancement of alkali solubility. Holocellulose contents were not affected severely during the period of fungal treatment, only reduction of 5~6% compared to the control. Xylose contents were decreased gradually from 23.4% to 18% after 6 weeks, whereas alpha-cellulose remained almost unchanged. Gel permeation chromatography (GPC) indicates that molecular weight of lignin undergoes a slight decrement for 4 weeks of fungal treatment. Nitrobenzene oxidation revealed that total yield of NBO products of lignins were lowered ca 20% after fungal treatment. Sum of syringaldehyde and syringic acid are remarkably decreased. However, increment of sum of vanillin and vanillic acid was surprisingly observed. These results work as indirect evidence that a specific lignolytic reaction, maybe selective demethoxylaytion of S-lignin, can occur during fungal treatment of aspen wood by C. subvermispora.

• Applied Chemistry for Engineering
• /
• v.18 no.5
• /
• pp.415-423
• /
• 2007

Pyrolysis characteristics of sawdust and rice husk as biomass resources in a thermogravimetric analysis were determined. Experiments were carried out with a linear heating rate under inert atmosphere of $N_2$ gas. Pyrolysis of the biomass can be classified as a lower temperature reaction zone where the major component of holocellulose is thermally decomposed and a high temperature reaction zone where lignin is thermally decomposed. The obtained data was analyzed by the two-step consecutive reaction model. Activation energies of sawdust and rice husk are found to be respectively 82.5 kJ/mol and 85.1kJ/mol in the low temperature zone according to the first order reaction model and 19.7 kJ/mol, 22.0 kJ/mol in the high temperature zone according to the three-way transport model. The reaction rate constant with variation of heating rate can be well predicted by the kinetic compensation relation of Gaur-Reed.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.36-44
• /
• 2013

This study is focused on the debarking and xylem separation yield of Paper Mulberry. We investigated the most efficient manual on the automatic debarking and xylem separator machine. The bast tissues of Paper Mulberry were separated in three layers including black outer layer, green inner layer, and white inner layer. A target is to save the white inner layer of these three layers as much as possible. The experimental machine most characterize xylem separation and debarking by frictional force between the bulges and Paper Mulberry by the drum rotation. It is possible automatically to operate the machine by controlling the temperature sensor and the time. Debarking process can be know that removed black outer layer has beem accumulate and measured the weight. The content of the extract, holocellulose, lignin and ashes of the white inner layer was analyzed. It is result that conditions of optimum process of the experimental machine is 45 RPM, temperature at $60^{\circ}C$(60 min.) and $80^{\circ}C$(60 min.), mixing bulge of 10 mm(120ea) and 30 mm(120ea) and capacity of Paper Mulberry 10 kg.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.3
• /
• pp.99-106
• /
• 2016

Our aim was to identify the potential of reed stalk as a raw materials for biomass pellet production. Compared to woody biomass, reed stalk contained significant levels of ash. The holocellulose content of reed stalk was similar to that of larch, but the lignin content of reed stalk was lower than that of larch. In the elemental analysis, chlorine content of reed stalk was much higher than that of larch, and satisfied only the mixed biomass pellet B of European non-woody pellet standards(EN 14961-6). In quantitative analysis of the ash, heavy metals contents of reed stalk satisfied European non-woody pellet standards. Higher heating value of oven-dried reed stalk pellet was slightly lower than that of larch wood pellet. The durability of reed stalk pellet was lower than that of larch wood pellet. The results of this study indicate that reed stalk might be used as a raw material of mixed biomass pellet B.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.5
• /
• pp.1-7
• /
• 2012

Chemical composition, morphological properties and papermaking properties of Sasa quelpaertensis Nakai were investigated in order to use it comprehensively. The lignin contents of stalks and leaves were 18.8% and 15.3% and the holocellulose contents were 63.3% and 48.6% respectively. The contents of ash and the amount of water extract showed the higher value than those of wood or other bamboo species. The average fibers length and width of Sasa quelpaertensis Nakai were 780 ${\mu}m$ and 14.8 ${\mu}m$. The fibers of Sasa quelpaertensis Nakai stalk had thinner width and more slender structure than those of softwood. The handsheet made of Sasa quelpaertensis Nakai alkaline pulp showed higher in tensile strength and bulkier structure than those of handsheet made of soft wood unbleached kraft pulp.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.231-240
• /
• 2016

The change in chemical compositions of leachate and medium density fiberboard (MDF) from a laboratory-scale simulated landfill which constructed in a plastic container containing alternating layers of soil and MDF was investigated to evaluate decomposing of MDF in soil. Four treatments were conducted: 1) MDF in soil, 2) MDF only, 3) cured UF resin in soil, and 4) soil only. Molecular weight (MW) distribution of compounds in leachate from soil only treatment did not change over time. In UF resin in soil treatment, the MW distribution shifted to a lower MW distribution over time, while the peak shifted to the left indicated changing to higher MW distribution in leachate from treatment 1 and 2 contained MDF. Higher percent nitrogen in leachate was observed in MDF containing treatments due to the UF resin in the MDF. The percent carbon slightly increased in MDF only while that greatly decreased in MDF in soil treatment maybe due to bacterial activity. The percent of extractable materials from the MDF decreased greatly on day 35 compare to day 0, and subsequently did not change much on day 77. In contrast, percent holocellulose and lignin did not change much over time. No structural change of the wood fiber in MDF occurs during the study. Water-soluble materials from MDF in soil contributed the change in chemical composition of leachate.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.59-67
• /
• 2001

Rice husk flours were analyzed by chemical composition and thermogravimetric methods in nitrogen atmosphere to discuss its feasibility as a raw material for manufacturing agricultural lignocellulosic fiber-thermoplastic polymer composite. It was revealed in the chemical composition analysis that rice husk flour was composed of moisture, 5.0%; lignin, 21.6%; holocellulose, 60.8%; ash, 12.6%. In the thermogravimetric analysis (TGA), thermal decomposition behavior of rice husk flour from room temperature to $350^{\circ}C$ was similar to that of wood flour, but rice husk flour was more thermally stable from 350 to $800^{\circ}C$ than wood flour because of higher silica content in the rice husk flour and smaller particle size of rice husk flour. The activation energy of thermal decomposition was evaluated using Flynn & Wall expression. As the thermal decomposition proceeded in rice husk flour, the activation energy of thermal decomposition appeared almost constant up to ${\alpha}=0.25$, but thereafter increased. Activation energy of thermal decomposition in wood flour, however, decreased steeply up to ${\alpha}=0.3$, but thereafter remained almost constant. From the results, rice husk flour was thought be a substitute for wood flour in manufacturing agricultural lignocellulosic fiber-thermoplastic polymer composite in the aspect of thermal decomposition.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.31-39
• /
• 2011

The applicability of arrowroots as materials for paper manufacture was investigated by evaluating the characteristics of arrowroots pulping and pulps, and the surface characteristics of paper made of arrowroots. The results is as follows. The yield of grounded pulp, alkaline pulp, grounded bleach pulp, and alkaline bleach pulp are 98.0%, 37.7%, 84.8%, and 32.5%, respectively. The extraction components in arrowroot's fibers was shown high in 1%-NaOH extraction. The amount of holocellulose and lignin were largely decreased, but a slight decrease was shown in the bleaching processes. Many shivers were shown in the grounded fibers. The amount of shivers was decreased and the single fibers were increased during the process of bleaching. The alkaline pulp and the alkaline bleach pulp showed high in the beating time and freeness than the grounded pulp and grounded bleach pulp. The conditions of sheet surface according to beating time is effected largely by the conditions of original pulp.

• Food Science of Animal Resources
• /
• v.18 no.1
• /
• pp.42-49
• /
• 1998

The contents of holocellulose, one of the main components of the wood, were 83.9% in oak wood and 76.9% in apple wood, respectively. Those of hemicellulose were 16.41 and 20.33%, and in lignin 23.0 and 19.7%, respectively. Six species of domestic oak wood and apple wood were considered to be suitable for smoking materials due to the low content of lignin. Benzo(a)pyrene contents in smoke flavoring prepared with oak wood at 150, 400 and 500$^{\circ}C$ were 0. 4, 3. 7 and 5.6$\mu\textrm{g}$,/kg, respectively. The amounts of phenanthrene were 112.7, 131.4 and 255.9$\mu\textrm{g}$/kg, respectively, in each temperature. The amounts of polycyclic aromatic hydrocarbons(PAH) in smoke flavory were in the order of phenanthrene＞anthracene＞pyrene＞benzo(a)anthracene＞chrysene＞benzo(b)fluoranthens＞benzo(a)pyrene Benzo(a)pyrene contents in smoking extracts prepared with apple wood at 150, 400 and 500$^{\circ}C$ were 0.4, 3.3 and 5.5$\mu\textrm{g}$/kg, respectively. Phenanthrene contents in those samples were 72.7, 100.2 and 220.5$\mu\textrm{g}$/kg, respectively. Contents of each PAH showed the same order as in oak wood.

• 보존과학연구
• /
• s.11
• /
• pp.87-105
• /
• 1990

Chemical and micro morphological changes of archaeological waterlogged woods from shipwrecked materials in marine situations were investigated which were submerged in seabed for over 900 years. Tested Wood species were Pinusdensiflora, Zelkova serrata, Quercus acutissima and Camellia japonica. The obtained results were summarized as follows; Chemical analysis showed that lignin content was increased, whereas the amout of holocellulose was heavily decreased in the degraded archaeological lwoods(DAW), when compared to the recent woods. The amount of alkalineextractives in the DAW was extremley high. IR spectra showed that disappearance of absortion band at $1,730㎝^-1$ intensity increase at 1,600, 1,500 and $1,270㎝^-1$ and the emergence of single band around $1,050㎝^-1$.Microscopic investigation showed that cell wall of latewood tracheids and fiber in the DAW were severely degraded while, early wood tracheids less degraded. Degradation in the cell wall was mainley occurred in $S_2$layer, while the middle lamella was the least degraded. The micro morphological characteristics of DAW were separation of secondary wall from middle lamella, cavities aligned with micro fibril angle in $S_2$layer and granular appearance of secondary wall by the bacterial attack.