• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.29-34
• /
• 2002

This paper presents formation of ejector-pin hollowness in injection molding. Injection molding process is widely used in production of plastic part for good dimensional accuracy and high productivity. However, the injection molding leaves ejector-pin hollowness on pal, which causes bad part surface and quality. Dimensions and profiles of ejector-pin hollowness are measured for formation or ejector-pin hollowness. The formation of ejector-pin hollowness is traced with dimensions and profiles of ejector-pin hollowness. The compression force and moment cause ejector-pin to form hollowness on part surface.

• Archives of Plastic Surgery
• /
• 제45권3호
• /
• pp.214-221
• /
• 2018

Clarification is needed regarding the definitions and classification of groove and hollowness of the infraorbital region depending on the cause, anatomical characteristics, and appearance. Grooves in the infraorbital region can be classified as nasojugal grooves (or folds), tear trough deformities, and palpebromalar grooves; these can be differentiated based on anatomical characteristics. They are caused by the herniation of intraorbital fat, atrophy of the skin and subcutaneous fat, contraction of the orbital part of the orbicularis oculi muscle or squinting, and malar bone resorption. Safe and successful treatment requires an optimal choice of filler and treatment method. The choice between a cannula and needle depends on various factors; a needle is better for injections into a subdermal area in a relatively safe plane, while a cannula is recommended for avoiding vascular compromise when injecting filler into a deep fat layer and releasing fibrotic ligamentous structures. The injection of a soft-tissue filler into the subcutaneous fat tissue is recommended for treating mild indentations around the orbital rim and nasojugal region. Reducing the tethering effect of ligamentous structures by undermining using a cannula prior to the filler injection is recommended for treating relatively deep and fine indentations. The treatment of mild prolapse of the intraorbital septal fat or broad flattening of the infraorbital region can be improved by restoring the volume deficiency using a relatively firm filler.

• 혜화의학회지
• /
• 제16권1호
• /
• pp.199-206
• /
• 2007

Objective : The purpose of this study is to report treated case about patient with diplopia caused by stroke. Methods : The improvement of diplopia was observed as he was treated with acupuncture therapy and herb medicine named Bo-gan-san(保肝散). Results : Diplopia improved and disappeared gradually with acupuncture therapy and herb medicine named Bo-gan-san(保肝散). The patient was discharged with favorable recovery. Conclusion : In traditional Korean medicine, diplopia is caused by disorder of JungKi(精氣), intrusion of PoongSa(風邪) into Neoi(腦), and hollowness of Gan(肝), Shin(腎). Treating it is by expelling PoongSa(風邪) or strengthening Gan(肝), Shin(腎). The patient was diagnosed as cerebral infarction according to Brain MRI. Diplopia was improved after acupunctural therapy and intaking Bo-gan-san(保肝散), herbal prescription selected from DongYiBoGam(東醫寶鑑).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.60-63
• /
• 2004

Recently, carbon nanotubes(CNTs) have been demonstrated to possess remarkable mechanical and electronic properties, in particular, for field emission applications. Its high aspect ratio and extremely small diameter, hollowness, together with high mechanical strength and high chemical stability, are advantages for use in field emitter. In this paper, we demonstrate electrical discharge properties from carbon nanotube cathode electrodes to use as an emitter electrode of vacuum gauges. Vertically aligned $2{\times}2mm^2$ CNT arrays on the silicon substrate were synthesized by the thermal CVD method on Fe catalytic metal, and a glass patterning by the sand blast method and the silicon/glass anodic bonding processes were applied to make samples with 2 electrodes. The field emission was examined under the vacuum range of $10^{-3}$ Torr.

• 복합신소재구조학회 논문집
• /
• 제4권3호
• /
• pp.13-21
• /
• 2013

In this study, uniaxial compression tests were performed to investigates the stress-strain relations of Double Skinned Composite Tubular Columns reinforced with steel tube. The confined concrete has been known as the strength of concrete increases significantly. Specimens reinforced with outer and inner steel tube were tested by uniaxial compression test. To investigate the influence of concrete strength increase by confining conditions in steel tubes, 8 specimens with different thickness of tube, hollowness ratio and concrete strength were tested and compared with other researcher's concrete material model.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.870-873
• /
• 2007

하천의 수공 구조물은 홍수 시 작용하는 유수력에 대한 안정성을 확보해야 한다. 본 연구에서는 최근 개발된 친환경 식생호안블록인 중공블록을 하상에 설치할 경우 흐름에 미치는 영향을 연구하였다. 중공블록을 설치한 개수로에 대한 수리모형 실험을 실시하여 흐름저항과 경계층 특성에 대한 중공블록의 영향을 평가하였다. 흐름저항 특성 인자인 Manning의 조도계수와 Darcy-Weisbach의 마찰손실계수는 일정한 유량과 하상경사의 경우 수심에 큰 영향을 받고 이들은 서로 비례관계에 있음을 확인하였다. 그러나 마찰손실계수가 증가하더라도 어느 한계점 이상이 되면 조도계수는 일정한 값으로 수렴한다. 개수로의 경계층의 높이는 하천의 흐름특성과 구조특성을 반영하는 것으로 수심, 유속, 에너지경사, 경계면의 상대조도, Reynolds수, Froude수 등의 함수로 나타낼 수 있다. 중공블록이 설치된 개수로의 조도계수는 일반하천의 경우와 비교하여 큰 값을 나타내고 있어 중공블록이 흐름저항을 크게 증가시키는 것으로 판단된다.

• 대한토목학회논문집
• /
• 제31권3A호
• /
• pp.215-225
• /
• 2011

일반적으로 프리캐스트 교각은 공장에서 모든 제품을 생산하여 품질의 균질성을 확보할 수 있으며, 고강도 콘크리트를 사용할 수 있어 중공 형태로 블록을 제작할 수 있어 사하중 절감효과가 발생한다. 이러한 프리캐스트 교각 공법은 미국 일본 등에서 이미 실용화하여 적용되고 있는 공법으로 주로 PC 긴장재를 사용한 블록간의 연결에 의해 이루어지고 있다. 하지만, PC 긴장재를 사용하게 되면 과다한 초기 공사비가 소요되어 비경제적 시공이 불가피하다. 본 연구의 목적은 공기 단축과 초기 공사비를 절감하기 위해 PC 긴장재를 사용하지 않고, 슬리브와 일반 철근만으로 구성된 경제적이면서 시공성이 우수한 프리캐스트 교각 공법 개발에 있다. 이를 위해 본 연구에서는 신형식 철근이음 장치인 그라우팅형(形) 슬리브를 이용한 프리캐스트 교각 단면에 대하여 중공율, 주철근 직경, 단면 크기 등을 변수로 총 5개의 축소모형에 대하여 실험적으로 성능을 평가하였으며, 스케일 효과가 배제된 상태에서의 현장 적용성을 살펴보기 위해 최종적으로 성능을 검토하기 위하여 대형모형실험을 통해 교각의 성능을 검증하였다.

• 한국염색가공학회지
• /
• 제23권3호
• /
• pp.210-218
• /
• 2011

The structure of kapok fiber was characterized using FTIR and $^{13}C$-NMR spectrometers, elemental analyzer, x-ray diffractometer, SEM and IMT I-Solution ver 7.5. The kapok has a hollow tube shape and is composed of cellulose I with crystallinity of 47.95%. To develop novel oil-sorbent materials necessary to avoid the environmental pollution by spilled oil, the oil absorption capacity of various fibers such as kapok, polypropylene(PP), acryl, bamboo, cotton, rayon and wool fibers is compared in this study. The kapok fiber had the highest oil absorption capacity among the fibers and its water absorption capacity was the least. The kapok fiber selectively absorbed significant amounts of oils (43g/g of fiber for kerosene, 65g/g of fiber for soybean oil), which might be due to higher hydrophobicity of the kapok fiber, suggesting that kapok fiber may have high potential as excellent oil-absorbent materials.

• 한국임상수의학회지
• /
• 제21권2호
• /
• pp.177-180
• /
• 2004

Lower motor neuron signs of hind limbs, anus and bladder were identified by history taking and physical examination in the 6.8 year-old mongrel dog and 2.6 year-old Cocker spaniel. The Cocker spaniel, also showed gradual cranial migration of neurologic deficit including respiratory paralysis. On plain radiography and myelography, intervertebral disc extrusion between L2 and L3, the infiltration of contrast medium into the spinal cord and cord swelling were found in the mongrel dog, and infiltration of contrast medium like hollowness of cord parenchyma was observed in the Cocker spaniel. On the basis of clinical signs and radiographic findings, they were diagnosed tentatively as acute myelomalacia. The Cocker spaniel died of respiratory paralysis on the following day. Decompressive surgery was performed on the mongrel dog and the extensive necrosis and hemorrhage were found at surgery. It was euthanized with the owner's consent because of the perceived poor prognosis. Histopathologic examination after autopsy confirmed acute diffuse hemorrhagic myelomalacia with the swelling and the inflammation of axon, showing hemorrhagic changes in the white matter and the grey matter.

• 한국멀티미디어학회논문지
• /
• 제10권12호
• /
• pp.1687-1697
• /
• 2007

Paik Nam-June is known as a Video Artist. Video is a presentation tool with the feature of recordability. However, it is not only a video which has been applied as an art presentation tool by him. Nevertheless, the existing researches fail to notice the aesthetic concept which is shown as the rest contents or forms, as they focus on the media features of Paik Nam-June's video. Therefore, this article aims at contemplating the art world of Paik Nam-June with its contents as 'visualization of music' and its form as 'hypermediacy' Therefore, 1. Sound is shown as the visualization of music, with the direct influence of absolute hollowness and noise of John Cage, originated from Zen Buddhism, while the foundation of it is known to be from the liberation of dissonance of Arnold Schoenberg and creative impromptu of shamanic sound. 2. The from of TVs influence of the orchestra, originated from Culture of a dining table in Korean. and indicated hypermediacy 3. Paik Nam-June indicated 'Text-interpretation' us to text analytics of 'how to read', rather than the question of 'what to tell' by intermedia as the visualization of music & hypermediacy.