• 한국군사과학기술학회지
• /
• 제21권1호
• /
• pp.25-39
• /
• 2018

In this paper, an integrated analysis model for evaluating the underwater acoustic performance of the multilayered acoustic coatings containing visco-elastic composite layers with hollow glass microspheres is described. The model uses the effective medium theory considering the acoustic scattering and resonance effects of the inclusions. Also, the model incorporates the compressive deformation mechanism associated with hydrostatic pressure. The technique developed in this work was used as the acoustic layer design and performance analysis tools for the practical hull coatings and acoustic baffles in Korean next generation submarines.

• 공업화학
• /
• 제27권4호
• /
• pp.449-454
• /
• 2016

본 연구에서는 구형의 폴리스티렌 구슬을 틀로 사용하여, 크기분포가 좁으면서 속은 비어있고 벽이 다공성인 구조의 탄소 마이크로 캡슐을 합성하였다. 폴리스티렌의 표면은 무기물인 실리카졸이 쉽게 입혀질 수 있도록 폴리비닐피롤리돈(PVP)을 코팅하여 변조하였다. PVP가 코팅된 PS 마이크로 입자표면에 SBA-16 졸을 부착시킨 다음, 실리카층에 존재하는 중간 크기의 세공 내에 탄소원을 채워 넣는 음각식 형뜨기법을 적용함으로써 속이 빈 구조의 탄소 마이크로캡슐을 제조하였다. 탄화과정을 거치고 틀로 사용한 다공성 실리카입자를 HF로 용해하면, 좁은 입자크기분포를 갖는 중간세공이 함유된 계란껍질형의 탄소입자를 얻을 수 있었다. 계란껍질형 탄소 마이크로캡슐 입자의 다공성과 전기화학적 특성은 XRD, SEM, TEM, 질소분자 흡/탈착분석법 및 cyclic voltammetry법으로 평가하였다. 이들 탄소입자는 슈퍼캐패시터와 같은 전자재료로서 유효하게 사용될 만한 높은 전기전도도와 용량을 나타내었다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2004년도 하계학술연구발표회 논문개요집
• /
• pp.122-122
• /
• 2004

• 센서학회지
• /
• 제27권4호
• /
• pp.221-226
• /
• 2018

Misfueling accidents significantly damage the engines of both gasoline and diesel vehicles, and should be avoided by rapid and accurate fuel discrimination. Gasoline fuel contains bioethanol. Thus, the detection of ethanol vapor produced by gasoline can be used to distinguish between gasoline and diesel. In the present study, Pt-doped $SnO_2$ hollow nanospheres, Mg-doped $In_2O_3$ hollow microspheres, and Pt-doped ZnO nanostructures have been used as gas sensors to discriminate between gasoline and diesel fuels. All three sensors are able to detect and discriminate between gases evaporating from gasoline and diesel. Among the sensors, the Mg-doped $In_2O_3$ hollow microspheres show a significant gas response (resistance ratio = 4.97) quickly (~3 s) after exposure to gasoline-evaporated gas at $225^{\circ}C$, but did not show any substantial response to diesel-evaporated gas. This demonstrates that gasoline and diesel fuels can be discriminated using small and cost-effective oxide semiconductor gas sensors.

• Bulletin of the Korean Chemical Society
• /
• 제32권9호
• /
• pp.3274-3280
• /
• 2011

Monodispersed porous NiO and $Co_3O_4$ microcapsules with a hollow core were synthesized using SBA-16 silica sol and PS as a hard template. The porous hollow microcapsules were characterized by XRD, TEM and $N_2$ adsorption/desorption analysis. After $H_2$ reduction of metal oxide microspheres, they were conducted as an active catalyst in the reduction of chiral butylronitrile and cyanobenzene. The mesoporous metals having a hollow structure showed a higher activity than a nonporous metal powder and an impregnated metal on the carbon support.

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.28-35
• /
• 2023

Moiré patterns emerge due to the interference between the non-emission area of the LED screen and the grid line in an image sensor of a video recording device when taking a video in the presence of the LED screen. To reduce the moiré intensity, we have fabricated an anti-moiré filter using hollow glass microspheres (HGMs) by slot-die coating. The LED screen has a large non-emission area because of a large pitch (distance between LED chips), causing more severe moiré phenomenon, compared with a display panel having a very narrow black matrix (BM). It is shown that HGMs diffuse light in such a way that the periodicity of the screen is broken and thus the moiré intensity weakens. To quantitatively analyze its moiré suppression capability, we have calculated the spatial frequencies of the moiré fringes using fast Fourier transform. It is addressed that the moiré phenomenon is suppressed and thus the amplitude of each discrete spatial frequency term is reduced as the HGM concentration is increased. Using the filter with the HGM concentration of 9 wt%, the moiré fringes appeared depending sensitively on the distance between the LED screen and the camera are almost completely removed and the visibility of a nature image is enhanced at a sacrifice of luminance.

• Korean Chemical Engineering Research
• /
• 제45권6호
• /
• pp.611-618
• /
• 2007

아민기로 코팅된 단분산 폴리스티렌 입자를 제조한 뒤 톨루엔-물로 구성된 유중수 액적(oil-in-water emulsion) 내부에서 입자를 자기 조립(self-assembly)시켜 다양한 다면체(polyhedra) 구조의 콜로이드 클러스터(colloidal cluster)를 제조하였다. 콜로이드 클러스터의 표면에서 솔-젤(sol-gel) 반응을 유발한 뒤 표면이 실리카로 코팅된 복합(composite) 콜로이드 클러스터를 제조할 수 있었고 이를 주형(template)으로 활용하여 고온 소성에 의해 내부의 폴리스티렌 입자를 제거하고 마이크로미터 크기의 다양한 구조의 비구형상 공동 입자(hollow particle)를 제조하였다. 밀도구배원심분리법 (density gradient centrifugation)에 의해 폴리스티렌 구성 입자의 수와 구조가 균일한 콜로이드 클러스터를 제조할 수 있었으며 표면 솔-젤 반응에 의해 비구형상 구조의 공동 입자를 제조하였다.

• 한국세라믹학회지
• /
• 제47권6호
• /
• pp.546-552
• /
• 2010

The achievement of high gas permeability is a key factor in the development of porous SiC ceramics for applications of hot gas filter, vacuum chuck, and air spindle. However, few reports on the gas permeability of porous SiC ceramics can be found in the literature. In this paper, porous SiC ceramics were fabricated at temperatures ranging from $1600^{\circ}C$ to $1800^{\circ}C$ using the mixing powders of SiC, silicon, carbon and boron as starting materials. In some samples, expanded hollow microspheres as a pore former were used to make a cellular pore structure. It was possible to produce Si bonded SiC ceramics with porosities ranging from 42% to 55%. The maximum bending strength was 58MPa for the carbon content of 0.2 wt% and sintering temperature of $1700^{\circ}C$. The increase of air permeability was accelerated by addition of hollow microsphere as a pore former.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.247-247
• /
• 2006

Chemical and physical synthesis routes were combined to prepare macroporous thin films of semiconducting metal-oxides such as $CaCu_{3}Ti_{4}O_{12}\;and\;TiO_{2}$ by sputtering onto (PMMA) microsphere templated substrates. Subsequently, the colloidal templates were removed by thermal decomposition. The remaining inorganic films comprised a monolayer of hollow hemispheres with diameter commensurate with that of the microspheres. This unique morphology increases the surface area and reduces the interfacial area between film and substrate. Consequently, the surface activity is markedly enhanced while deleterious interfacial effects between film and substrate are significantly reduced. Both effects are highly advantageous for gas sensing applications.

• 접착 및 계면
• /
• 제16권2호
• /
• pp.76-82
• /
• 2015

SPG 막유화법에 의해 NIPAAm, MBA 및 APS를 용해시킨 수용액을 톨루엔과 미네랄오일의 혼합용액인 연속상에 HMP, Span80과 함께 유화(W/O emulsion)시킨 후, UV광중합법에 의해 PNIPAAm 하이드로젤 입자를 제조하였다. 연속상 내 미네랄 오일의 비율이 증가할수록, PNIPAAm 하이드로젤의 입도와 입자 내 PNIPAAm의 밀도가 증가하였으며, 이에 따라서 VPTT 근처에서 온도 변화에 따른 하이드로젤의 팽윤도($V/V_o$)도 크게 변화하였다. UV 광중합 시 $20^{\circ}C$에서는 속이 꽉찬 형태의 하이드로젤이 제조되었으나 LCST보다 높은 $40^{\circ}C$의 온도에서는 공동입자에서와 같이 하이드로젤의 외벽이 두껍게 형성되었다. 가교제인 MBA의 함량이 증가함에 따라서 가교도 및 입자 내 PNIPAAm의 밀도도 함께 증가하였다.