• 한국생산제조학회지
• /
• 제24권4호
• /
• pp.368-373
• /
• 2015

Porous alumina ceramics with two different pore sizes were fabricated using hollow microspheres as the pore-forming agent. The relative density, total porosity, and microstructure of the obtained alumina ceramics were studied. It was found that the total porosity of sintered samples with different amounts of hollow microsphere content, from 2.0 to 4.0 wt%, was 69.3-75.6%. The interconnected and spherical cell morphology was obtained with 3.0 wt% hollow microsphere content. The resulting ceramics consist of a hierarchical structure with large-sized cells, and small-sized pores in the cell walls. Moreover, the compressive strength of the sintered samples varied from 8.3-11.5 MPa, corresponding to hollow microsphere contents of 2.0-4.0 wt%.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.108-115
• /
• 2009

In this study, a novel-processing route for producing microcellular zirconia ceramics has been developed. The proposed strategy for making the microcellular zirconia ceramics involves hollow microsphere as a pore former which has extremely low density of $0.025\;g/cm^3$. Effects of hollow microsphere content and sintering temperature on microstructure, porosity, pore distribution, and compressive strength were investigated in the processing of microcellular zirconia ceramics. By controlling the content of hollow microsphere, it was possible to make the porous zirconia ceramics with porosities ranging from 45% to 75%. Typical compressive strength value of microcellular zirconia ceramics with ${\sim}65%$ porosity was over 50 MPa. By adjusting the mixing ratio of large and small zirconia powders, it was possible to control the pore structure from close to open pores.

• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.74-79
• /
• 2011

The pore generation technology using GHM (Glass Hollow Microsphere) was studied in order to reduce the weights of porcelain. In this study, we verify the property of modified slurry by adding GHM. The modified slurry was prepared by adding 1.0~2.5 wt%(K1), 1.0~6.0 wt%(K37) of GHM to the slurry for porcelain. The slurry viscosity were stable inside a content range of 1.0~2.5 wt%(K1), 1.0~6.0 wt%(K37). However, the viscosity of modified slurry increased more than 3.0 wt%(K1) and 6.5 wt%(K37). The formed specimen by slip casting was fired at $1229^{\circ}C$, $1254^{\circ}C$. As the amount of GHM content increased, the weight decreased and the addition of 1.0~2.5 wt%(K1), 1.0~6.0 wt%(K37) of GHM resulted in a weight drop of 30%(K1) and 25(K37). However, when the GHM content increased, the strength decreases over 70%. This is caused by the presence of a large volume of surface defects (pores) and defects from the agglomeration of GHM.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.502-509
• /
• 2011

In this study, a novel-processing route for fabricating microcellular zirconia ceramics has been developed. The proposed strategy for making the microcellula zirconia ceramics involved hollow microspheres as pore former. Compared to conventional dense microspheres pore former, well-defined pore structured zirconia ceramics were successfully fabricated. Effects of hollow microsphere content and sintering temperature on microstructure, porosity, pore distribution, and strength were investigated in the processing of microcellular zirconia ceramics.

• 공업화학
• /
• 제22권3호
• /
• pp.340-342
• /
• 2011

다양한 종류의 이온성액체를 사용하여 미세중공체 이산화티타늄 입자를 제조하였다. 이온성액체의 종류에 따라 제조된 이산화티타늄 입자는 다양한 크기와 모양을 형성하였다. 이는 이온성액체와 유기용매 계면 사이에서 형성되는 이산화티타늄이 두 물질 사이의 상호작용에 의해 모양 형성에 영향을 받기 때문이다. 여러 가지 이온성액체 중에서 미세중공체를 제조하는데 있어서 가장 효과적인 이온성액체는 1-Butyl-3-methylimidazolium tetrafluoroborate였다.

• 마이크로전자및패키징학회지
• /
• 제28권4호
• /
• pp.79-83
• /
• 2021

본 연구에서는 기존의 silicon alkoxide(tetraethyl orthosilicate, TEOS)에 비해 단가가 저렴하여 상업화에 유리한 물유리를 전구체로 사용하여 계면활성제의 농도에 따라 형성되는 다양한 크기의 실리카 중공 미세구(hollow silica microsphere, HSM)를 합성하였다. 계면활성제의 농도에 따른 실리카 중공 미세구의 형성에 대한 물성을 퓨리에 분광기(Fourier transform infrared spectrometer), 접촉각 측정기(contact angle measurement), Brunauer-Emmett-Teller 및 Barrett-Joyner-Halenda 분석기와 전계방사형 주사전자현미경(field emission scanning electron microscopy)를 이용하여 분석하였다. 계면활성제를 적정량의 농도로 투입하여 porou s한 물유리 기반 실리카 중공 미세구를 제조할 경우 비표면적은 169 m²/g, 평균 입자 크기 25.3 ㎛ 및 표준편차는 6.25로 우수한 실리카 중공 미세구가 형성됨을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권6호
• /
• pp.1410-1412
• /
• 2009

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.228-235
• /
• 2011

Sintering behavior and lightweight characteristics of porcelain by addition of FAHM (Fly-Ash Hollow Microsphere) were evaluated. Green body of Backja composition (general porcelain) in which FAHM was added(15 and 20 wt%) was made by slip casting method. The green body was sintered at 1270 and $1290^{\circ}C$ and maintained for 1h. The bulk density and linear shrinkage of the sintered body with FAHM (20 wt%) decreased. As the contents of FAHM. increased, mullite and cristobalite phases increased. In the microstructure, FAHM shells remained after sintering, and the generation of mullite fibers around FAHM shells also were confirmed. the weight of porcelain with of 20% FAHM decreased by 40% and residual FAHM shells promoted the mullite of generation in the matrix.

• 공업화학
• /
• 제17권6호
• /
• pp.648-652
• /
• 2006

$MnO_{2}$는 배터리, 촉매 및 capacitor 등의 사용으로 인하여 이의 수요는 날로 증가하고 있다. 본 연구는 sacrificial core 법을 이용하여 $MnO_{2}$ 중공 미세구를 제조하였다. 이때 $MnO_{2}$ 나노입자는 manganese acetate의 가수분해 및 축합반응에 의해 제조되었다. 실험결과 물 0.2%, manganese acetate 0.65 mM, 촉매 0.02 mM를 실온에서 반응시켜 실험을 하였을 때 일정한 모양의 $MnO_{2}$ hollow microsphere를 제조할 수 있었다.

• 청정기술
• /
• 제14권4호
• /
• pp.256-264
• /
• 2008

본 연구에서는 생분해가 가능하여 친환경성이 우수한 지방족 폴리에스터 중에서 PBAST를 이용하여, 다중유화법($W_1/O/W_2$)에 의해 PBAST/PVA 두층을 갖는 중공미세구를 제조하였다. 최적의 이중층 중공미세구를 얻을 수 있는 조건은, 유기상에서 의 PBAST고분자의 농도 5 wt%, 내부 수용액 상에서의 PVA의 농도 5 wt%, $W_1/O$ emulsion과 외부 수용액상의 비율이 1:4.5이었고 계면활성제는 단일 성분을 사용하는 경우보다 HLB 값의 차이가 큰 보조계면활성제(co-surfactant)를 사용하는 경우였으며, 이때 PBAST/PVA 이중층중공미세구(double-layered microsphere)의 제조 수율은 30.92%, 미세구의 총괄밀도(bulk density)는 0.180 g/ml이며 입자크기는 $1.5{\sim}3\;{\mu}m$로 고른 분포를 나타내었다.