• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.25-32
• /
• 2022

There has been a growing demand for water based-type PSA due to environmental regulations for solvent-type PSA. And accordingly, there is a growing expectation as well for tackifiers used to compensate for the problem of deterioration of physical properties. Therefore, In this study, water-based tackifiers were synthesized by changing the contents of hard and functional acrylic monomers CHMA, IBOA, and AA. And these were added to the pressure-sensitive adhesive at 10 phr and their physical properties were compared. Tackiness slightly decreased as CHMA increased and IBOA decreased. Since the intermolecular bonding force increased due to the increase in AA content, the lower the AA content showed better results. Peel strength increased as the tackifiers were added because the fluidity of the polymer chain increased. And higher AA content showed better results because more hydrogen bonds were formed. The holding power tended to decrease as CHMA increased because the content of IBOA relatively decreased which has a large influence on the holding power. And higher AA content showed better results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.11 s.254
• /
• pp.1425-1432
• /
• 2006

Coating layers on a coated sheet steel frequently affect distributions of strain rate of sheets and deteriorate the frictional characteristics between sheets and tools in sheet metal forming. Thus, it is important to identify the deformation behavior of these coatings to ensure the success of the sheet forming operation. In this study, the technique using nano-indentation test, FE-simulation and Artificial Neural Network(ANN) were proposed to determine the power law stress-strain behavior of coating layer and the power law behavior of extracted coating layers was examined using FE-simulation of drawing and nano-indentation process. Also, deep drawing test was performed to estimate the formability and frictional characteristic of coated sheet, which was calculated using the linear relationship between drawing force and blank holding force obtained from the deep drawing test. FE-simulations of the drawing process were respectively carried out for single-behavior FE-model having one stress-strain behavior and for layer-behavior FE-model which consist of coating and substrate separately. The results of simulations showed that layer-behavior model can predict drawing forces with more accuracy in comparison with single-behavior model. Also, mean friction coefficients used in FE-simulation signify the value that can occur maximum drawing force in a drawing test.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.2
• /
• pp.37-42
• /
• 2000

In this paper, The high-speed, low-Power analog-to-digital conversion structure is proposed using the pipelined comparator away for high-speed conversion rate and the successive- approximation structure for low-power consumption. This structure is the successive-approximation structure using pipelined comparator array to change the reference voltage during the holding time. An 8-bit 10MS/s analog-to-digital converter is designed using 0.8${\mu}{\textrm}{m}$ CMOS technology. The INL/DNL errors are $\pm$0.5/$\pm$1, respectively. The SNR is 41㏈ at a sampling rate of 10MHz with 100KHz sine input signal. The Power consumption is 4.14㎽ at 10MS/s.

• Strategy21
• /
• s.38
• /
• pp.47-82
• /
• 2015

To control the sphere, it required a strategic understanding to sphere and a power for overcome to it. In the early 20th century, the Pacific-War is a confrontation between the U.S. and the Japan for holding supremacy a pacific ocean sphere, building on maritime geopolitical perception. The Pacific ocean is a large of sphere, so if a country pursues a Pacific region supremacy, it needs a strategic perception and capability to control the sphere. After the U.S. has unified the continental, it has formed geopolitical perception in the Pacific ocean and by the way to control the Pacific ocean selected a naval power. The U.S. must have overcome a Pacific sphere for getting through to the Pacific region, this concept has developed the War Plan Orange(war plan relations with the Japan). Meanwhile, at this point of time, the Japan has recognized to a geopolitical point of view about security environment in the Pacific ocean. like as the U.S. has the War Plan Orange in mind for building on geopolitical perception of the Pacific ocean, the Japan also has learned geopolitical perception from the U.S. Because of this, the Japan has established the Interception-Attrition strategy(war plan relations with the U.S.). If we don't have overcome a sphere of the Pacific ocean, we don't hold hegemony of the Asia-Pacific region. So the analysis of perspective maritime geopolitics about the Pacific war is a meaningful study.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.5
• /
• pp.43-50
• /
• 2002

To improve the current waveform of diode rectifiers, we propose a new operating principle for the voltage -doubler diode rectifiers. In the conventional voltage-doubler rectifier circuit, relatively large capacitors are used to boost the output voltage, while the proposed circuit uses smaller ones and a small reactor not to boost the output voltage but improve the input current waveform. A high input power factor of 97[%] and an efficiency of 98[%] are also obtained. The harmonic guide lines of proposed rectifier is no interfered with inverter switching, resulting in a simple, reliable and low-cost ac-to dc converters in comparison with the boost-type current-improving circuits.It compared conventional pulse-widthmodulated(PWM)inverter with half pulse-widthmodulated (HPWM) inverter. Proposed HPWM inverter eliminated dead-time by lowering switchingloss and holding over-shooting.

• Journal of Families and Better Life
• /
• v.33 no.4
• /
• pp.51-65
• /
• 2015

Case management is becoming increasingly more important in the field of social welfare. The purpose of this study was to examine the practice of case management at community child centers and to identify factors influencing their performance. In addition, this study also analysed the performance level of case management at each stage and the factors influencing the level at each stage. For the purpose of this study, data obtained from about 181 community child center workers in Busan, Ulsan and Gyeongsangnamdo were analyzed. According to the results of the analysis, in Model 1 which represents the category of socio-demographic and personal factors, three factors namely gender, experience in case management, and interpersonal skills were found to be significantly influential and they have an explanatory power of 21.5%. Under the category of organizational factors in Model 2, four factors were found to be influential: experience in case management, interpersonal skills, availability of case management guidelines, and holding case conferences. These factors account for 33% explanatory power, 11.5% higher than that of Model 1. In Model 3 which represents the third category of community network literacy, three factors namely interpersonal skills, availability of case management guidelines, and ability to utilize networks were found to influence case management at community child centers, and they have an explanatory power of 43.4%, 10.4% higher than that of Model 2. For the practice of social welfare, these findings have the implication that community child center workers need to improve their interpersonal skills by cultivating communication skills, collaborative problem-solving skills, conflict-management skills, and other relevant skills. Furthermore, it is necessary to provide specific guidelines for case management, to have regular case conferences, to establish a community network, and to reinforce cooperation and mutual support among institutions within the network.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.10
• /
• pp.581-586
• /
• 2002

To improve the current waveform of diode rectifiers, we propose a new operating principle for the voltage-doubler diode rectifiers. In the conventional voltage-doubler rectifier circuit, relatively large capacitors are used to boost the output voltage, while the proposed circuit uses smaller ones and a small reactor not to boost the output voltage but improve the input current waveform. A circuit design method is shown by experimentation and confirmed simulation. The experimental results of the proposed diode rectifier satisfies the harmonic guide lines. A high input power factor of 97(%) and an efficiency of 98[%] are also obtained. The new rectifier with no controlled switches meet the harmonic guide lines, resulting in a simple, reliable and low-cost at-to dc converters in comparison with the boost-type current-improving circuits. This paper proposes a nonlinear impedance circuit composed by diodes and inductors or capacitors. This circuit needs no control circuits and switches, and the impedance value is changed by the polarity of current or voltage. And this paper presents one of these applications to improve the input current of capacitor input diode rectifiers. The rectifier using the nonlinear impedance circuit is constructed with four diodes and four capacitors in addition to the conventional rectifiers, that is, it has eight diodes and five capacitors, including a DC link capacitor. It makes harmonic components of the input current reduction and the power factor improvement. Half pulse-width modulated (HPWM) inverter was explained compared with conventional pulse width modulated(PWM) inverter. Proposed HPWM inverter eliminated dead-time by lowering switching loss and holding over-shooting.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.6
• /
• pp.454-459
• /
• 2020

In this study, a TiO₂/TiO_2-x-based resistance variable memory was fabricated using a DC/RF magnetron sputtering system and ALD. In order to analyze the effect of oxygen plasma treatment on the performance of resistance random access memory (ReRAM), the TiO₂/TiO_2-x-based ReRAM was evaluated by applying RF power to the TiO_2-x oxygen-holding layer at 30, 60, 90, 120, and 150 W, respectively. The ReRAM was fabricated, and the electrical and surface area performances were compared and analyzed. In the case of ReRAM without oxygen plasma treatment, the I-V curve had a hysteresis curve shape, but the width was very small, with a relatively high surface roughness of the oxygen-retaining layer. However, in the case of oxygen plasma treatment, the HRS/LRS ratio for the I-V curve improved as the applied RF power increased; stable improvement was also noted in the surface roughness of the oxygen-retaining layer. It was confirmed that the low voltage drive was not smooth due to charge trapping in the oxygen diffusion barrier layer owing to the high intensity ReRAM applied with an RF power of approximately 150 W.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.4
• /
• pp.85-98
• /
• 2003

Computational power of IC chip is improved day after day producing IC chips holding co-processor continuously. Also a lot of wireless terminals which IC chip embedded in are produced in order to provide simple and various services in the wireless terminal market. However it is difficult to apply the key distribution protocol under wired communication environment to wireless communication environment. Because the computational power of co-processor embedded in IC chip under wireless communication environment is less than that under wired communication environment. In this paper, we propose the hey distribution protocol appropriate for wireless communication environment which diminishes the computational burden of server and client by using co-processor that performs cryptographic operations and makes up for the restrictive computational power of terminal. And our proposal is satisfied with the security requirements that are not provided in existing key distribution protocol.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.311-317
• /
• 2011

The mechanical properties of heat-compressed Radiata pine (Pinus radiata D.Don) by compression set were investigated. Heat-compression condition was temperature at $180^{\circ}C$ and press time for 60 minutes. The mechanical properties of heat-compressed wood increased with increasing compression set. Increase of the specific gravity has led to increase in mechanical properties. The maximum compression set of Radiata pine was investigated approximately 65%. It was almost same result with porosity 68% of Radiata pine in specific gravity 0.48.