• Fashion & Textile Research Journal
• /
• v.5 no.3
• /
• pp.235-243
• /
• 2003

This study is to figure out where the current satisfaction with ready-to-wear clothes based on middle-aged women's body shapes is at and to propose basic considerations in its production for coming up with a better sizing system to maximize customer's satisfaction. The data obtained from measurement and questionnaire by 126 middle- aged (35-59) women which were located in Gwangju. Followings are summary of this research, 1)The satisfaction level with lower -wear is relatively lower-wear than that of upper-wear in most parts of body. 2) The results by way of putting score show three different groups. Group 1 has characteristics of front body silhouette in the small ratio of shoulder width/bust width, shoulder width/waist width and big ratio of shoulder width/hip width. And Group 3 has characteristics of front silhouette, small ratio of hip girth/thigh girth. Group 2 has a standard shape. 3) The satisfaction level with lower-wear based on middle-aged women's body shapes shows slight difference. In this category, Group 2 has higher satisfaction level than that of Group 1, while Group 1 has better shape than Group 3. 4) The items of clothes which should be considered current less satisfaction on their size and pattern are skirt and pants. In the meantime, specific body parts for the same criteria are hip girth, thigh girth. And the 43.7% of middle-aged women who responded to this study requires improvement on the fit of lower-wear.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.59-66
• /
• 2019

The purpose of this study was to develop slacks pattern of elderly women aged over 60s by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, By using 3D Virtual Garment Simulation, new slacks pattern considered elderly women was development. The basic numerical formula were as follows, front waist girth W/4+2+1.5, back waist girth W/4+1.5+0.5, front hip girth H/4+0.75, back hip girth H/4+1.5, front crotch extension H/16-0.5, back crotch extension H/8-1.3, front dart amount 2 and back dart amount 1.5. Second, according to the results of the new slacks pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new slacks pattern is appropriate for the elderly women. Also, new slacks pattern was evaluated to allow proper space length of waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• The Research Journal of the Costume Culture
• /
• v.31 no.6
• /
• pp.793-805
• /
• 2023

This study analyzes the body shapes of lower-body obese female adolescents and proposes a slacks pattern suitable for their body type. Lower-body obesity is a prevalent type of teenage obesity, and our proposals aim to improve consumer satisfaction in ready-to-wear clothes across this demographic. We first observe characteristics of obese lower bodies, noting significantly above-average thigh and hip circumference. These figures indicate a high degree of curvature in obese lower bodies, along with a large drop value. Leveraging this data, we develop a novel slacks pattern using 3D avatars in a virtual simulation system. The formulas for the main areas of the pattern are as follows: front waist girth W/4+0.75cm+0.5cm, back waist girth W/4+0.5cm-0.5cm, front hip girth H/4+1.25cm-0.5cm, back hip girth H/4+2cm+0.5cm, front crotch extension H/16+0.5cm, back crotch extension H/8+1cm. Results from appearance evaluations show that this pattern minimizes strain rate on the waist and hips, and its average score is significantly higher than that of an alternative pattern that was also evaluated. The minimized strain rate and high average score indicate that our pattern assigns a sufficient amount of space to the appropriate areas. Based on these results, we expect our research to inform slacks pattern development and production for obese consumers of all types.

• Korean Journal of Human Ecology
• /
• v.11 no.1
• /
• pp.59-67
• /
• 2002

The purpose of this study was to investigate the recognition and satisfaction of the lower body shapes of male college students. The subjects in this study were 178 male college students. The results were as follows: 1. The degree of recognition and satisfaction of girth items in lower part of the body scored average. Subjects tended to be dissatisfied with their height. 2. The degree of satisfaction of waist girth and weight was influenced by the real body size than the degree of recognition. And abdomen girth, hip girth, ankle girth, leg length, hight, crotch length were affected by the degree of recognition than the real body size. 3. Subjects were more satisfied with standard lower body type than with lean and obese ones.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.2 s.38
• /
• pp.151-162
• /
• 1991

The purpose of this study was to examine the point at issue unfitness and unclassification in figures for clothing construction. Comparing measurements of 3 sold figures and physical body by Suck·Go method and 19 items were selected. These items were acquired by factor analysis and cluster analysis an measurements of 200 women in twenties. The results were as follows; 1. Comparison between measurement of figures and physical body; There was not so much difference among figures, but significant difference between figures and physical body. 2. Comparison between measurement of surface area of figures and physical body; There was similar to each figure, but significant difference between figures and physical body. Mostly, figures were bigger than physical body in front parts but smaller in back parts. 3. There were 8 items selected by factor analysis; That is bust girth, waist girth, hip girth, neck base girth, posterior waist length, bust point length, chest breadth and armscye girth. 4. There were 7 clusters selected by cluster analysis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1979-1990
• /
• 2009

This study suggests apparel sizing systems for obese women in their twenties to fifties. Size Korea body measurement data were used for sampling the obese subjects by obesity judgment indices. A total of 7 obesity judgment indices frequently used in the clothing field were inspected and the measurement data of 499 females defined as "obese" by over 5 obesity judgment indices were analyzed. The results of the study were as follows: A total of 2,212 female body measurement data for the Size Korea Project were collected. These were compared with the 499 data of the obese women in the study. Except for all heights and some lengths correlating with heights, the measurements of obese women were larger than the entire group of females. Bust girth, hip girth, and height were selected as control dimensions of the outerwear covering the upper body; waist girth and hip girth were selected as control dimensions of the outerwear covering the lower body. In each crosstabulation table, 3cm pitches and 5cm pitches by bust girth, waist girth, and hip girth were compared in the aspects of coverage and coverage efficiency. Finally, sizing charts for outerwear covering the upper body and the lower body of obese women were established in the study through the comparison of the coverage and the coverage efficiency. These Size charts were given by 5cm pitches as final sizing systems. Size number of outerwear covering the upper body was 10 and size number of outerwear covering the lower body was 9. In addition, the body measurements of control dimensions and referable dimensions for making garments are given.

• Fashion & Textile Research Journal
• /
• v.19 no.6
• /
• pp.768-776
• /
• 2017

This study analyzed the relationships among actual body types, perceived body types, body-image discrepancy(difference between perceived and ideal body), and body satisfaction, and their effects on jacket fit satisfaction at 17 body parts of women in their 20s. To apprehend the actual body type of subjects, total 18 items were measured according to the anthropometric method of the 6th anthropometric survey project. The relationship between body-image discrepancy and body satisfaction was correlated in all body parts. Body-image discrepancy and body satisfaction were more affected by perceived body size than actual body size. The fit satisfaction level of the jacket was found to be lower as the discrepancy between the body type and the ideal body type was recognized. As the waist girth, hip girth, armscye girth, and upper arm girth were smaller, the height was taller, bust girth and breast size were larger, these body sizes were considered as closer to the ideal body shape and the jacket fit of the area was more satisfied. When the perceived body sizes and the actual body sizes were compared, the women in their 20s tended to perceive their waist, abdomen, and hip as larger, their shoulder length and front/back interscye as longer, their breast size as smaller, and their waist height as lower than the actual size.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.963-970
• /
• 2013

The purpose of this study was to develop torso pattern of underweight female in their 20s~30s by using Clo 3D virtual garment simulation system. The results were as follows; first, as a result of analyzing torso somatotype, underweight women showed lower average than average values of whole women in their twenties and thirties in the items such as length, width, circumference, thickness except for height. Second, by using 3D virtual garment simulation, new torso pattern considered underweight female was development. The basic numerical formula were as follows ; bust girth B/2+3.5, armhole depth B/4+0.5, front waist girth W/4+0.5+0.7, back waist girth W/4+0.5-0.7, front hip girth H/4+1+0.5, back hip girth H/4+1-0.5, chest width B/6+3.1, back width B/6+4.5, neck width B/12+0.2 and neck depth B/12+1.7. Third, by reducing hollowed amount of front, back, and side line, and hollowed amount of back center line, the reduced quantity was included to darts amount. Number of dart was adjusted to two pieces so that darts amount was equally distributed to two darts. Forth, according to the results of the new torso pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new torso pattern was appropriate for the underweight women. This study is expected to serve as one of important basic data for ensuing studies that may utilize 3D virtual garment simulation system with 2D patterns, and also for future 3D pattern production program development.

• The Research Journal of the Costume Culture
• /
• v.8 no.4
• /
• pp.549-561
• /
• 2000

The purpose of this study was to survey and analyze the age classification of women customers as a target market and sizes on a label that were actually produced by each brand in Korean national brands ; they were classified into size for bodice and bottom, and compared with the distribution of national data of women's body measurement. They were analyzed and classified by brand groups of 'miss', 'missy', 'Mrs.'and 'madam', The results were ; 1) It was found that recent products for ready-made for women's clothes tend to be designed with target to the measured ages classified by the range of five or ten years. The main practice was that for 'miss'brand group the age range was of five years, and for 'missy'brand group, ten years. And for 'Mrs'and 'madam'brand groups, it was of 15 or 20 years. So that, it is necessary to design their clothes based on their features of body considering the intervals of age. 2) 'Mrs'and 'madam'groups were most remarkable for their distribution into a vast range of sizes for three control dimensions and waist girth size when compared to 'miss'and 'missy'groups. The distribution of brand size had no relation with that of body measurement, and in particular, none was produced for short height size between 145 and 150 ㎝. For tall height size between 175 and 180 ㎝, many brand sizes were distributed while body measurement was few. It means that distribution of brand size was different from real distribution of body measurement was few. It means that distribution of brand size was different from real distribution of body measurement as a result that the larger the bust girth in such cases over 160 ㎝, the larger the size of hip girth. Even as for the height 155 and 160 ㎝ in which body measurement is concentrated, there were many problems because while sizes of 'large'bust girth and 'small'hip girth had a large distribution, their clothes were not produced.

• The Research Journal of the Costume Culture
• /
• v.16 no.4
• /
• pp.609-618
• /
• 2008

The purpose of this study is to examine the inconvenience when putting on stretch pants and to compare and analyze the pattern making method of pants made of the stretch and non-stretch fabric to develop functional and good looking stretch pants. For this study, we conducted a survey of women in their twenties and collected the basic data and master pattern through material of a woman's wear brand and the interview and questionnaires. The results of this study are as follows. First, the survey result for the woman consumers showed that pants were estimated as the most uncomfortable item among the stretch clothes and when they put the stretch pants on, the most uncomfortable parts of out-shell were the hip girth and rise. Secondly, the result of pattern making method of the pants was as follows. The ease of the stretch pants pattern was 0cm in the waist girth and -1 to -1.5cm in the hip girth more than non-stretch pants. The ease in crotch, inseam and outseam length was 0cm for both.