• The KSFM Journal of Fluid Machinery
• /
• v.17 no.3
• /
• pp.25-32
• /
• 2014

The main objective of this study is to validate the performance characteristics of newly developed micro propeller turbine based on experimental model test. For this purpose, Measurements of efficiency and cavitation tests with variations on the guide vane opening, blade rotational speed, head and load are carried out according to the IEC standard for model testing. From the tests and scale up calculation, the maximum prototype and model efficiency of the runner blade reaches as high as 90.87 % and 90.27 % respectively. Test results show that good cavitation behavior is covered in the range of output 50kW and 100 kW.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.79-85
• /
• 2010

This paper presents a preliminary study of roller types for chip seals based on aggregate retention performance. Chip seal test sections composed of single seals of granite 78M aggregate and CRS-2 emulsion were constructed using three different roller types: the pneumatic tire roller, steel wheel roller, and combination roller. In order to investigate the performance of these rollers effectively, it is critical to test chip seal samples obtained directly from field construction. Therefore, test sections were constructed on New Sandy Hill Church Road near Bailey, North Carolina. Chip seal samples obtained from these sections were used for laboratory testing. The aggregate retention performance was evaluated using the flip-over test (FOT), Vialit test, and the third-scale Model Mobile Loading Simulator (MMLS3). Based on the test results and visual observation, both the pneumatic roller and the combination roller used together are recommended to improve chip seal performance with the sequence of the pneumatic roller rolling first followed by the combination roller.

• Korean Journal of Cognitive Science
• /
• v.25 no.2
• /
• pp.135-157
• /
• 2014

The present study investigated whether 6- and 12-month-old infants could infer an agent's social preference on the basis of intentions. In Experiment 1, 12-month-old infants were first familiarized with two kinds of event: the helping and the hindering events. In the helping event, an agent (either a square or triangle) tried to help a circle climb up the hill and the movie stopped right before the circle reached the top of the hill. Thus, the outcome of the helping behavior was made to be ambiguous. Similarly, in the hindering movie, another agent tried to hinder the circle from reaching the top of the hill and the movie stopped right before the circle slipped down to the base of the hill making the final outcome of the hindering behavior unclear. During the test trial, infants were either presented with an event in which the circle approached the helper (approach-helper condition) or an event in which the circle approached the hinderer (approach-hinderer condition). The results indicated that both 6- and 12-month-olds looked longer at the approach-helper event than at the approach-hinderer event. Thus, by 6 months of age, infants are sensitive to agents' intentions when reasoning about agents' social preference. The current findings add to the emerging evidence on social evaluation and moral reasoning during infancy.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.17 no.3
• /
• pp.3795-3814
• /
• 1975

The purpoes of this thesis is to study the effect of the variation of the beginning date of the suspension of irrigation and the length of intermittent suspension period of irrigation in the paddy field on the growth and yield of rice, so as the provide a critical limit of saving irrigation water and an irrigation method to prevent drough damage in rice cultivation. In this experiment, the rice variety adopted was NONGRIM No.29. There were seven main test plot, each test plot having a different beginning date of the suspension of irrigation. A main test plot was susdivided into five small test plots, each having a different length of the suspension period of irrigation. The results obtained in this experiment are summarized as follows: 1. The number of tillers is controlled by the treatment of the suspension of irrigation, its beginning date being early of late. The reductive effects of beginning dates of suspension upon the number of tillers. investigated on July 30, are about 84% for the treatment suspended on July 8, 87% on July 12, and 92% on July 19, respectively, in comparison with the standard plot. However. the suspenion treatments after the foregoing dates does not affect the control of their numbers. On the other hand, the lengths of intermittent suspension periods influence highly on the number of tillers to be restrained considerably, the decrease ratio ranging from 91% to 80% Both treatments on dates and periods are so intermingled that the restraining effects of suspension periods become greater as the dates of its beginning are earlier. 2. The elongation of plant hieghts also restrained considerably by the longer periods and earlier dates of suspension treatments of irrigation. Especially, the effects of the lengths of suspension periods become more serious. 3. Heading dates are delayed by two to five days through the suspension treatments of irrigation. However, the heading stage ends almost on the same day without relation to the differences between the irrigation suspension treatments. In the test plot where the suspension date of irrigation comes after the young panicle forming stage, the heading stage ends one or two days later than in the standard test plot. 4. Both culm lengths and panicle lengths show significant differences in their values, i.e., their lengths are shorter, as the begining dates of irrigation suspension are earlier and the suspension periods are longer. 5. The earlier the beginning date and the longer the period of irrigation suspension, the less is the number of panicles per hill in comparison with the standard plot. 6. The earlier the beginning date and the longer the period of irrigation suspension, the higher is the significant difference in the number of kernels per panicle in comparison with that in the standard test plot, i.e., the less is the number of kernels per panicle. 7. The earlier the beginning date and the longer the period of irrigation suspension, the lighter are the weights of rough rice and straws per hill in comparison with those in the standard plot.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.48-56
• /
• 2014

Even though vehicle types, gradient, pavement conditions and types of pavement should be considered for estimating fuel consumption, existing models were developed as a function of vehicle types and vehicle speed. Therefore in this study, the model of fuel consumption was developed using field test data in order that effect analysis on the passenger vehicle fuel consumption by road gradient. At first, fuel consumption was measured in second-based, using GPS device and fuel consumption measurement device for development of fuel consumption model considered road gradient. The road gradient was classified as flatland, up-hill and down-hill. Development of model was using by regression model which vehicle speed(km/h) and fuel consumption(${\ell}/km$). The on-road test proved that fuel consumption of passenger vehicle is affected by road gradient.

• Composites Research
• /
• v.14 no.3
• /
• pp.42-50
• /
• 2001

Modeling of damage initiation in singly oriented ply (SOP) Fiber Metal Laminate (FML) under concentrated loading conditions was studied. The finite element method (FEM) base on the first order shear deformation theory is used for th\ulcorner modeling of damage initiation in SOP FML. The failure indices (FI) of the fiber prepreg and the metal laminate were calculated by using the Tasi-Hill failure criterion and the Miser yield criterion, respectively. To verify the present method, the failure analysis was conducted under uniaxial loading and cylindrical bending, then the analysis under concentrated load was conducted. The results show that the analysis is reasonable. An indentation test was conducted to compare a damage initiation load with a calculated FI. The test was conducted under two side clamped conditions to study the fiber orientation effect. Indentation curve was fitted using the Hertz equation and a damage initiation load is defined that the point which deviate the fitted curve from the real indentation curve. The damage initiation loads were obtained under various fiber orientations and compared with calculated FIs. The experiment was well matched with calculated FI. This results shows that the present method is suitable for the damage initiation modeling of SOP FML.

• Journal of the Korea Society for Simulation
• /
• v.32 no.1
• /
• pp.23-34
• /
• 2023

The purpose of this paper is to review global stochastic optimization algorithms(GSOA) in case binary response experimentation is used and to compare the performances of them. GSOAs utilise estimator of probability of success $\^p$ instead of population probability of success p, since p is unknown and only known by its estimator which has stochastic characteristics. Hill climbing algorithm algorithm, simple random search, random search with random restart, random optimization, simulated annealing and particle swarm algorithm as a population based algorithm are considered as global stochastic optimization algorithms. For the purpose of comparing the algorithms, two types of test functions(one is simple uni-modal the other is complex multi-modal) are proposed and Monte Carlo simulation study is done to measure the performances of the algorithms. All algorithms show similar performances for simple test function. Less greedy algorithms such as Random optimization with Random Restart and Simulated Annealing, Particle Swarm Optimization(PSO) based on population show much better performances for complex multi-modal function.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.6
• /
• pp.13-27
• /
• 2012

Integer programming-based local search(IPbLS) is a kind of local search based on simple hill-climbing search and adopts integer programming for neighbor generation unlike general local search. According to an existing research [1], IPbLS is known as an effective method for the multidimensional knapsack problem(MKP) which has received wide attention in operations research and artificial intelligence area. However, the existing research has a shortcoming that it verified the superiority of IPbLS targeting only largest-scale problems among MKP test problems in the OR-Library. In this paper, I verify the superiority of IPbLS more objectively by applying it to other problems. In addition, unlike the existing IPbLS that combines simple hill-climbing search and integer programming, I propose methods combining other local search algorithms like hill-climbing search, tabu search, simulated annealing with integer programming. Through the experimental results, I confirmed that IPbLS shows comparable or better performance than the best known heuristic search also for mid or small-scale MKP test problems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.9
• /
• pp.1508-1516
• /
• 2003

In numerical analysis for hydroforming process, the stress calculation is effected by flow stress which is general obtained by stress-strain relationship from uni-axial tension test, so the result of the analysis, especially in tube hydroforming, has limitation of accuracy, tubes are made in roll-forming process and become work-hardened. Then roll forming process causes material properties between rolling direction and circumstantial direction of the tube to be different. So it is difficult to predict material behavior in the process condition of bi-axial stress state. In this study, the flow stress of the tube is determined by inverse engineering approach and bulge test that is widely used for formability test in the condition of bi-axial stress. And Hill's quadratic yield function and flow rule are used to consider the anisotropy of the tube in the roll forming process.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.58-61
• /
• 2001

An implicit finite element formulation for axisymmetric tube hydroforming is investigated. In order to describe normal anisotropy of the tube, Hill's non-quadratic yield function is employed. The frictional contact between die and tube and frictionless contact between tube and fluid are considered using the mesh-normal vector computed from finite element mesh of the tube. In order to verify the validity of the developed finite element formulation, the axisymmetric tube bulge test is simulated and simulation results are compared with experimental measurements. In the axisymmetric tube hydroforming process, an optimal hydraulic curve is pursued by performing the simulation with various internal pressures and axial forces.