• 제목/요약/키워드: hill test

Search Result 148, Processing Time 0.027 seconds

EHA 밸브 성능시험 장치 개발 (Development of Performance Test Equipment for Easy-Hill Assist Valve)

  • 정규홍
    • 드라이브 ㆍ 컨트롤
    • /
    • 제11권4호
    • /
    • pp.61-67
    • /
    • 2014
  • When a manual transmission equipped car stops on an incline where the nose of the car is higher than the rear, hill-start control or hill-holder could prevent the vehicle from rolling backward as the car moves forward. The easy-hill assist valve consists of a check valve and a needle type ON/OFF solenoid valve connected in parallel; it is a hydraulic actuator that can maintain brake pressure using an electrical signal from the ECU. As the EHA valve is a safety-related component of the brake system, high reliability as well as superior dynamic performance is required for it to be applied in commercial vehicles. This paper presents the design of the EHA valve as a piece of equipment that can simulate the brake actuation pressure with a pressurizing piston. Following specific test standards, the experimental results validate the implemented functions of the test equipment, proving the test stand to be effective for the performance and endurance of the EHA valve.

모아레法 에 의한 벌지試驗 에 관한 硏究 (Study on Bulge Test by Moire Method)

  • 백남주;지용주;강대민
    • 대한기계학회논문집
    • /
    • 제7권3호
    • /
    • pp.286-293
    • /
    • 1983
  • This study measures polar compressive thickness strain and radius of curvature of the bulge through Moire' method in bulge test. Hill's and Alexander's bulge theories, instability conditions derived by Swift's, Hill's, Alexander's and wang's theories, are also investigated, compared with Moire' experimental results. In order to review and compare with Hill's and Alexander's bulge theories, the relationships between radius of curvature of the bulge and polar height, between polar compressive thickness strain and polar height, are used. Mild steel, soft copper and commercial pure aluminum are used in Moire' experiment. According to this study, Hill's and Alexander's bulge theories, instability conditions derived by Swift's, Hill's, Alexander's and Wang's theories are agreement to Moire' experiment results.

제주산마의 운동강도별 심폐지구력 측정 (Evaluation of the Cardiorespiratory Endurance of Jeju Crossbred Horses according to Exercise Intensity)

  • 김남영;박용상;고문석;채현석;조원모;조인철;홍현주;박지윤;조상래;강태영
    • 한국임상수의학회지
    • /
    • 제30권6호
    • /
    • pp.449-452
    • /
    • 2013
  • 본 연구는 제주산마의 hill test 및 운동 강도별 심폐지구력 측정으로 승용능력 평가를 위한 기초 자료로 활용하기 위해 수행하였다. 분석에 이용된 제주산마 9두는 경사도 30도 내외의 경사로 800 m를 주행하는 hill test를 실시하였으며, 이 중 6 두는 운동 강도별(moderate, heavy, very heavy) 심폐지구력을 측정하였다. Hill test 주행시간은 평균 205 초였으며, 개체간 편차는 큰 것으로 확인 되었고, moderate exercise와 높은 상관관계를 보였다. 운동 강도별 평균 심박수는 유의적인 차이가 없었으나, 개체간 평균 심박수는 차이가 큰 것으로 나타났다. 회복 심박수는 heavy exercise와 very heavy exercise에서 높은 상관관계를 확인할 수 있었다. 본 실험결과, 운동 강도별 평균 심박수 차이는 확인 할 수 없었으나, 개체간의 차이는 큰 것으로 확인되었다.

Wind-sand tunnel experiment on the windblown sand transport and sedimentation over a two-dimensional sinusoidal hill

  • Lorenzo Raffaele;Gertjan Glabeke;Jeroen van Beeck
    • Wind and Structures
    • /
    • 제36권2호
    • /
    • pp.75-90
    • /
    • 2023
  • Turbulent wind flow over hilly terrains has been extensively investigated in the scientific literature and main findings have been included in technical standards. In particular, turbulent wind flow over nominally two-dimensional hills is often adopted as a benchmark to investigate wind turbine siting, estimate wind loading, and dispersion of particles transported by the wind, such as atmospheric pollutants, wind-driven rain, windblown snow. Windblown sand transport affects human-built structures and natural ecosystems in sandy desert and coastal regions, such as transport infrastructures and coastal sand dunes. Windblown sand transport taking place around any kind of obstacle is rarely in equilibrium conditions. As a result, the modelling of windblown sand transport over complex orographies is fundamental, even if seldomly investigated. In this study, the authors present a wind-sand tunnel test campaign carried out on a nominally two-dimensional sinusoidal hill. A first test is carried out on a flat sand fetch without any obstacle to assess sand transport in open field conditions. Then, a second test is carried out on the hill model to assess the sand flux overcoming the hill and the morphodynamic evolution of the sand sedimenting over its upwind slope. Finally, obtained results are condensed into a dimensionless parameter describing its sedimentation capability and compared with values resulting from other nominally two-dimensional obstacles from the literature.

BASIC 언어를 사용한 Hill-Sliding 무감독 분류법 Algorithm 개발 (Development of the Hill-Sliding Clustering Algorithm Using BASIC Language)

  • 鄭夢炫;崔圭弘;朴景允;Park, J.Kyoungyoon
    • 대한원격탐사학회지
    • /
    • 제1권1호
    • /
    • pp.89-97
    • /
    • 1985
  • Hill-Sliding Clustering이라는 다변량 자료의 무감독 분류 방법을 Apple II personal computer의 BASIC언어를 사용한 Algorithm으로 개발하였다. 이 Algorithm으로 다변량 multimode를 갖는 정규 분포 자료에서 사전 지식없이 자료를 집단화하여 구분해 낼 수 있게 되 었다. 한국 연안 지역의 Landsat(지구 자원 탐사 위성)의 다중, Spectrum 영상 자료에 적용한 시 험 결과, 매우 고무적 결론을 얻었다.

내페이드와 힐스타트 가상 시험을 통한 수동변속기 클러치 시스템의 온도 예측에 관한 연구 (A Study of Temperature Predictions for Manual Transmission Clutch System via Anti-fade and Hill Start Virtual Test)

  • 박기종;김동원
    • 한국자동차공학회논문집
    • /
    • 제23권1호
    • /
    • pp.122-129
    • /
    • 2015
  • Excessive overheating to a manual transmission clutch system under operating conditions can be considered the main reason of its performance degradation. The clutch system has to be ensured with its service life by showing that it passes the extreme tests called anti-fade test and hill start test in a certain design step. In general, design feedbacks from these kinds of the experiments are adapted to the system to enhance its performance. However, it usually takes much time and costs a lot due to the repetition of the tests. In this research, a process to calculate temperature of the clutch system was developed to determine whether the design can be passed the anti-fade test and hill start test in the design phase. The process incorporates many CAE techniques such as heat transfer analysis using 1D dynamic simulation method, system dynamics, CFD and parametric optimization. CFD is utilized to analyze 3-dimensional heat transfer of the clutch system and fluid dynamics of air in the clutch housing. The process was applied for the clutch systems in several vehicle models. The results was compared with those of the experiment. The applicability of the developed process was verified by comparing the predicted results with experimental results.

입술의 형태 모델과 Down Hill 탐색 방법을 이용한 입술 인식 (Lip Recognition using Lip Shape Model and Down Hill Search Method)

  • 이임건;장경식
    • 한국멀티미디어학회논문지
    • /
    • 제6권6호
    • /
    • pp.968-976
    • /
    • 2003
  • 본 논문은 입술형태를 인식하기 위한 방법을 제안하였다. 입술은 GLDM(Gray Level Distribution Model)을 기반으로 표현하였으며 입술인식은 모델에 대한 입력영상의 정확도에 대한 목적함수를 최적화하는 문제로 단순화하였다. 최적화를 위해 다운힐 심플렉스(Down Hill Simplex) 알고리즘을 이용하였으며 지역 최소점으로 수렴하는 문제를 해결하기 위한 새로운 방법을 제안하였다 제안한 방법으로 기존의 능동적 형태 모델(ASM Active Shape Model)에서 찾지 못하던 입술의 윤곽을 찾아낼 수 있음을 보였다.

  • PDF

정밀 파종용 롤러식 배종장치의 설계 (Design of Roller-Type Metering Device for Precision Planting)

  • 류일훈;김경욱
    • Journal of Biosystems Engineering
    • /
    • 제22권4호
    • /
    • pp.401-410
    • /
    • 1997
  • Scattering of seeds is one of the problems in the hill- dropping planters with a roller-type metering device. For crops like rice, corns and beans, the hill-dropping is own better for a high yield than the drill planting. The roller type metering device has been used for the drill planters and has many advantages. However, it has a problem of scattering of seeds when they are placed on rows. In this study a method was developed to design the roller type metering device fir the precision hill-droppings. Design parameters were derived to configure completely the geometries of the roller and brush. The method was applied to the design of the metering device of the rice seeding machines. The field test showed that the metering device designed by the method made a better performance of seed placement than that made by the precvious one. The method also can be applied to the design of metering devices for the precise hill-droppings of other crops.

  • PDF

Interobserver agreement for detecting Hill-Sachs lesions on magnetic resonance imaging

  • Alkaduhimi, Hassanin;Saarig, Aimane;Amajjar, Ihsan;van der Linde, Just A.;van Wier, Marieke F.;Willigenburg, Nienke W.;van den Bekerom, Michel P.J.
    • Clinics in Shoulder and Elbow
    • /
    • 제24권2호
    • /
    • pp.98-105
    • /
    • 2021
  • Background: Our aim is to determine the interobserver reliability for surgeons to detect Hill-Sachs lesions on magnetic resonance imaging (MRI), the certainty of judgement, and the effects of surgeon characteristics on agreement. Methods: Twenty-nine patients with Hill-Sachs lesions or other lesions with a similar appearance on MRIs were presented to 20 surgeons without any patient characteristics. The surgeons answered questions on the presence of Hill-Sachs lesions and the certainty of diagnosis. Interobserver agreement was assessed using the Fleiss' kappa (κ) and percentage of agreement. Agreement between surgeons was compared using a technique similar to the pairwise t-test for means, based on large-sample linear approximation of Fleiss' kappa, with Bonferroni correction. Results: The agreement between surgeons in detecting Hill-Sachs lesions on MRI was fair (69% agreement; κ, 0.304; p<0.001). In 84% of the cases, surgeons were certain or highly certain about the presence of a Hill-Sachs lesion. Conclusions: Although surgeons reported high levels of certainty for their ability to detect Hill-Sachs lesions, there was only a fair amount of agreement between surgeons in detecting Hill-Sachs lesions on MRI. This indicates that clear criteria for defining Hill-Sachs lesions are lacking, which hampers accurate diagnosis and can compromise treatment.

Effect of different plant densities on growth and yield of sorghum(Sorghum bicolor L. Moench.)

  • Cho, Young Dae;Jung, Ki Yuol;Chun, Hyun Chung;Lee, Sang Hun;Kang, Hang Won
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.206-206
    • /
    • 2017
  • Sorghum is a crop with a various plant height depending on the planting density. If the height exceeds 1.8m, which is the harvestable height of the combine, loss is caused by clogging of the installation, entrance of the threshing section and the threshing section. The purpose of this study is to set the planting distance and number of plants per hill suitable for combine harvesting as the plant length does not exceed 1.8m. The experimental variety was Nampungchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plot were 1 and 2 plants as number of plants per hill and sub-plots were $60{\times}20cm$ (practice), $70{\times}15$, 20, 25, 30 cm as planting distance. The amount of nitrogen, phosphate and potassium fertilization were 100, 70, $80kg\;ha^{-1}$. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode, (6) tiller number per hill. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. As number of plants per hill increased, plant height and yield increased and tiller number decreased. As planting distance increased, plant height and yield decreased and tiller number increased. At 1 plant per hill, the plant height did not exceed 1.8m at all planting distance. At 2 plants per hill, the plant height did not exceed 1.8m from the planting distance of $70{\times}25cm$. At 1 plant per hill, the tiller number increased to 0.23, 0.27, 0.60 and 0.70 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 2 plants per hill, the tiller number increased to 0.03, 0.03, 0.14 and 0.40 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 1 plant per hill, the yield decreased to 6030, 4280, 3400 and $3230kg\;ha^{-1}$ as the planting distance increased. At 2 plant per hill, the yield decreased to 7850, 5770, 5720 and $4960kg\;ha^{-1}$ as the planting distance increased. We recommend that the optimum number of plants per hill and planting distance is 2 and $70{\times}25cm$ suitable for combine harvesting.

  • PDF