• 한국소음진동공학회논문집
• /
• 제12권8호
• /
• pp.581-588
• /
• 2002

Precise highway traffic noise simulation and reduction require the accurate data for sound power levels omitted by vehicles, varied to road surface, traffic speed, vehicle types and makers, different from countries to countries. In this study, we have elaboratively measured Korea highway traffic noise and parameters affecting noise levels at the nearside carriageway edge. From numerical simulation using the measured results for highway traffic noise, we propose not only two correction factors to enhance the accuracy of Korea highway traffic sound power estimation using ASJ Model-1998 but also its typical power spectrum according to road surface type. The measured and predicted highway traffic noise levels using the proposed sound power show little difference within 1 dB.

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1191-1198
• /
• 2012

Highway traffic noise is the one of the most frequent pollutant source of environmental claims in Korea for the last 10 years. For abating the noise from the highways, characteristics of highway noise source should be investigated and identified before performing the abatements. Highway noises are affected by traffic volume, vehicle types and speed, tyre and pavement types. In this study, highway noises which measured from different pavements have been analyzed and compared. Especially, the noise from the asphalt concrete pavement, cement concrete pavement and low-noise pavement have been measured simultaneously at the same traffic condition and compared each other. Hopefully, the data of the study may be used for abating highway noise and further studies.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1273-1279
• /
• 2001

Precise highway traffic noise simulation and reduction require the accurate data for sound power levels emitted by vehicles, varied to road surface, traffic speed, vehicle types and makers, different from countries to countries. In this study, we have elaboratively measured domestic highway traffic noise and parameters affecting noise levels at the nearside carriageway edge. From numerical simulation using the measured results for highway traffic noise, we propose not only two correction factors to enhance the accuracy of highway traffic sound power estimation using ASJ Model-1998 but also its typical power spectrum according to road surface type. The measured and predicted highway traffic noise levels using the proposed sound power shows little difference within 1 dB.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.31-36
• /
• 2013

PURPOSES: This study is to investigate a generated traffic noise when vehicle pass over a transverse rumble strip at toll plaza of highway. METHODS: To investigate traffic noise at toll plaza of highway, Pass-by method which is the most common used for measuring traffic noise was adopted and the traffic noise at toll plaza was measured for 10 min per hour for 11hours(13:00~24:00). RESULTS: The measured traffic noise by pass-by method was changed as function of the transverse rumble strip configuration. Generally, the maximum difference among three noise measurement sections was 7 dB(A). It might be related with traffic speed. Also, the measured traffic noise was strongly generated from a passenger car which was 2 axle. It means that the most of traffic noise on the road is generated at tire/pavement interface of the passenger car. CONCLUSIONS: The traffic noise was strongly related with vehicle speed and transverse rumble strip configuration on the road. For driver safety, the transverse rumble strip is definitely necessary. However, the complaints from residents near highway was increased by traffic noise from transverse rumble strip. Therefore, To satisfy both safety and reduction of traffic noise, the development of configuration of transverse rumble strip is necessary in the further study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.101-104
• /
• 2007

All of noise prediction model have it's own features in the case of modeling conditions, so it is very important to know the features of each model case by case for a proper modeling, especially using at the Environmental Impact Assessment. For prediction of highway traffic noise and abating the noise by barriers, two kinds of prediction model, HW-NOISE, KHTN(Korea Highway Traffic Noise) has been mainly used in Korea. In this study, the features of these models were described at the same conditions. The properties of sound power from a road, diffraction characteristics from a barrier, sound pressure level decaying in each model were investigated. Using the results, it will be anticipated that the proper using of prediction models in the works of highway noise abating.

• Advances in environmental research
• /
• 제4권4호
• /
• pp.211-218
• /
• 2015

Traffic noise estimation models are useful in evaluation of the noise pollution in current circumstances. They are helpful tools for design and planning new roads and highways. Measurement of average traffic noise level is possible when traffic speed and volume are known. The objective of this study was to devise a model for prediction of highway traffic noise levels based on current traffic variables in Iran. The design of this model was to take the impact of traffic congestion into consideration and to be field tested. This study is a library research augmented by field study conducted on Saeedi Highway located south west of Tehran. The period for the field study lasted 5 days from 7-12 February, 2013. This study examined liner and non-liner methods in formulation of its model. Liner method without a fixed coefficient was the best fit for the intended model. The proposed model can serve as a decision making tool to estimate the impact of key influential factors on sound pressure levels in urban areas in Iran.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.33-39
• /
• 2013

PURPOSES : This research investigates traffic noise characteristics as change the transverse rumble strips shape from rectangular to cylinder at toll plaza of highway. METHODS : The traffic noise was investigated at two different places at toll plaza of highway. One is modified grooving, another is employed cylinder shape of TRS instead of rectangular shape of TRS. A measurement of traffic noise was conducted at same location and time period. The traffic volume information was gotten from office of highway office and vehicle speed was measured by speed measuring device. The traffic noise measurement was conducted from 13:00 to 23:00 and by pass-by method. Also, the traffic noise was measured behind noise barrier. Various distance from noise barrier(7.5m, 30m, 50m) and different heights(1.2m, 3m, and 5m) were parameter for measurement of traffic noise in this study. RESULTS : The class 1 vehicle was contributed from traffic volume which was increased 1,500. However, the distribution of traffic speed didn't change compare to previous investigated period. From this study, It was found that the external traffic noise was changed as function of geometric shape of TRS. The external noise from modified grooving was less than 1.2dB(A) of the current TRS. A difference of traffic noise was 20dB(A) before and after barrier. It came from a noise barrier effect as reduction of traffic noise. According to investigate a traffic noise distribution near barrier, there is similar noise characteristic as function of height at 7.5m distance from noise barrier. Also, There is no different traffic noise between 30m and 50m from source of the noise of sound barrier. CONCLUSIONS : Based on this traffic noise investigation result, there is a clear characteristic difference as changed TRS shape. The traffic noise was reduced by changed TRS shape. Specially, traffic noise was decreased although the traffic volume was increase for same investigation time and period. It is implied that cylinder type of TRS significantly reduces the traffic noise. The specification of various TRS will be studied in the future.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.30-33
• /
• 2006

The purpose of this study is the improvement of the prediction model of highway noise. It includes the measurement and analysis of the highway noise for various types of roads and environments. The results of the measurement are compared with the noise levels predicted by highway noise prediction models including domestic and foreign ones and any recommendation to improve the accuracy of the models should be provided.

• 한국환경복원기술학회지
• /
• 제2권1호
• /
• pp.72-82
• /
• 1999

The objective of this study was to covering of vine the traffic noise barrier and analyse of their growth characteristics. For the purpose of the experiments, chosen were 28 plants. In January 1996 to December 1998, the nursery seedbeds on the Chonju Arboretum in Korea Highway Corporation were seeding and cutting with those species, and a few species were carried out Honam Highway field experiments. The results are summarized as follows ; The germination ratio of seedbed experiments were Wisteria floribunda(88%), Lonicera japonica(86%), Parthenocissus tricuspidata, Paederia scandens(85%), Celastrus orbiculatus(76%), Clematis terniflora var. denticulata(52%), Clematis mandshurica(44%) respectively. The rooting ratio of cutting experiments were Trachelospermum asiaticum var. intermedium(88%), Parthenocissus quinquefolia(87%), Trachelospermum asiaticum var. asiatica(85%), Kadsura japonica(82%), Hedera rhombea(81%), Euonymus fortunei var. radicans(83%), Trachelospermum jasminoides var. pubescens(80%), Lonicera japonica cv. Aureo-reticulata(80%), Trachelospermum asiaticum var. majus(78%), Euonymus radicans cv. Aureo-marginata(66%), in descending order. As a conclusion, this study shows that the traffic noise barrier was effected by Paederia scandens, Lonicera japonica, Parthenocissus quinquefolia, Wisteria floribunda, Parthenocissus tricuspidata in the field experiments and the others were necessary to maintainable management.

• 한국환경복원기술학회지
• /
• 제3권3호
• /
• pp.37-44
• /
• 2000

The objective of this study is on suggesting the simulation model of 10 selected plants for the traffic noise barrier through field experiment by computer. The field experiment was carried out at the traffic noise barrier of Honam highway. The results are as follows. 1. It was identified that Paederia scandens, Celastrus Orbiculatus, Lonicera japonica, Wisteria floribunda, Parthenocissus tricuspidata and Parthenocissus quinquefolia grows well vertically and takes 3 years in covering completely. 2. It was identified that Trachelospermum asiaticum and Hedera rhombea, evergreen Climber(vine), grows slowly in comparative with other deciduous Climbers(vine), but give drivers good landscapes in winter. So those have considerable value in the south region of Taejeon. 3. It was identified that Wisteria jl.oribunda, Lonicera japonica, Paederia scandens, Clematis mandschurica and Campsis grandijlora showed good view in flowering period. 4. It was identified that auxiliary materials for inducing growth were needed in other plants except Parthenocissus tricuspidata, Parthenocissus quinquefolia. 5. It was identified that subsequent research about the auxiliary materials for inducing growth and adequate planting distance of each plants is needed for actual application.