• 제목/요약/키워드: highway traffic management

검색결과 148건 처리시간 0.025초

GIS를 이용한 진동환경 관리시스템 개발 (Development of The Vibration Management System Using GIS)

  • 허영;구용우;김진구
    • 소음진동
    • /
    • 제7권3호
    • /
    • pp.369-376
    • /
    • 1997
  • With recent progress of developing infrastructure, construction vibration from the sites and traffic vibration caused by high-speed rail, subway, and roads is becoming a hazardous factor for vibration environment. In order to predict the damages caused by the vibrations mentioned above the vibration sources, have to be distinguished between point vibration and line vibration. Once the character of the vibration source is determined vibration propagation phenomenon needs to be analyzed by using prediction formula, and compared to the limits authorized by the law. The main purpose of this thesis is to manage the efficient vibration by reflecting these finding in making a consrtuction plan. Therefore, Vibration Management System (VMS) was developed which can predict and analyze the extent of developed utilizing Geographic Information System (GIS) to build a database. This database contains the attribute and the location information of the sources for predicting the formula of explosive vibration and subway traffic vibration, the buildings, the surrounding area and measurement sites. VMS will be useful in the future for predicting the vibrations caused by pile drive, traffic vibrations such as high speed electric railway, highway and roads, and other explosive vibrations by supplementing and updating the database.

  • PDF

교통시뮬레이션 모형을 이용한 램프미터링 정지선 설정에 따른 효과분석 (The Effectiveness Analysis on Set of Ramp Metering STOP-line Using Traffic Simulation Model)

  • 김인수;양충헌
    • 한국도로학회논문집
    • /
    • 제16권1호
    • /
    • pp.111-118
    • /
    • 2014
  • PURPOSES : This study performs fundamental research on ramp-metering design criteria. METHODS : We carefully review previous studies in terms of ramp-metering design criteria and then consider applicability in Korea. For this, traffic simulation model is employed to analyze actual effect according to specific location of stop-line when implementing ramp-metering. RESULTS : When a stop-line moving forward with a 50m interval, travel speed at mainline relative to current stop-line location tends to decrease. However, traveling speed at approach roads increase about 5~18% under the same condition. When a stop-line location moving backward with a 50m interval, mainline travel speed increase approximately 17~32% whereas traveling speed at approach roads decrease. All cases are compared with the current stop-line location. CONCLUSIONS : We believe that both cases are useful with respect to freeway management. For example, moving forward a stop-line case can be used management for queuing area at ramp section and approach roads. Moving backward a stop-line case can be used for traffic control, focusing on mainline of freeways.

도로포장의 생애주기비용 분석을 위한 장기 교통수요 추정 (Traffic Demand Forecasting Method for LCCA of Pavement Section)

  • 도명식;김윤식;이상혁;한대석
    • 대한토목학회논문집
    • /
    • 제33권5호
    • /
    • pp.2057-2067
    • /
    • 2013
  • 기존의 포장관리를 위한 장래 교통수요의 추정에는 객관적인 방법에 의한 장래 교통수요의 추정이라기보다는 과거 추세(trends)나 분석가의 주관적인 판단에 의해 이루어졌다고 할 수 있으며, 새로운 도로의 신설 및 우회도로의 계획 등 대상 지역의 장래 도로 및 지역개발 계획을 전혀 고려하지 못한 교통수요의 추정이 이루어졌다고 할 수 있다. 본 연구에서는 보다 객관적이며 정도 높은 국도의 유지관리를 위한 의사결정지원시스템(decision-making support system)의 구축을 위한 기초연구로써 장래 포장의 공용성에 큰 영향을 미치는 장기 교통수요 예측의 중요성을 살펴보고 기존 교통수요 추정 방식과의 비교를 위한 기준(baseline) 수요를 산정하기 위해 EMME(Equilibre multimodal, Multimodal Equilibrium)를 이용하여 4단계 교통수요 추정 방법에 따라 장래 교통수요를 예측하는 방안을 제시하였다. 사례연구를 위해 본 연구에서는 대전지방국토관리청 관할의 일부 지역을 대상으로 교통수요 추정방안별 비교를 수행하였으며, 기존의 수요추정 방법과 본 연구에서 제시한 장래 지역개발계획과 도로의 신설 및 확장계획 등을 고려한 교통수요 추정방법과는 교통량의 수요뿐만 아니라 관리자비용 및 이용자비용의 수준에도 큰 괴리가 있음을 확인하였다.

라인스캔 카메라를 이용한 도로 안전시설 설치간격 및 높이측정 시스템 개발 및 현장적용 (System Development and Field Application for Measuring installation Interval and Height of Road safety Facilities Using a tine Scanning Camera)

  • 문형철;서영찬
    • 한국도로학회논문집
    • /
    • 제10권3호
    • /
    • pp.231-237
    • /
    • 2008
  • 선진국의 기본 요건들 중 하나는 잘 정비된 교통인프라라 할 수 있을 것이다. 이러한 교통안전시설에 대해 해외에서는 각종 교통안전시설에 대해 객관적인 상태평가를 기초로 하여 시설을 관리하는 자산관리(Asset Management)측면에서 시설을 관리하고 있는 추세이다. 이 중 도로관련 각종 안전시설은 매우 다양하며, 기능 또한 매우 중요하기 때문에 이들에 대한 설치 규정 및 지침을 제정하고 있다. 그러나 설치기준 및 지침이 있음에도 불구하고, 각 시설이 기준에 부합되게 설치되지 않아 오히려 도로이용자에게 불편함 뿐 아니라, 안전에도 악영향을 끼치고 있다. 본 연구에서는 다양한 도로안전시설 중 도로의 설계(운영)속도 및 기하구조에 따라 설치 간격 및 높이들이 규정화 되어있는 시설에 대해 라인스캔카메라를 이용, 이를 신속하게 측정 가능한 영상분석 모델을 개발하였다. 또한 이를 체계적으로 분석할 수 있는 프로그램을 개발하여 현장에 적용하였으며, 그 결과 매우 정확하게 시설의 크기와 설치간격을 신속하게 측정할 수 있었다.

  • PDF

교통특성에 따른 도시간선도로 위계분류법 (Classification of Urban Arterial Roads Based on Traffic Characteristics)

  • 이진선
    • 한국ITS학회 논문지
    • /
    • 제17권2호
    • /
    • pp.32-38
    • /
    • 2018
  • 국도의 분류에 대한 연구는 계속되어왔으나 도시간선도로의 분류에 대한 연구는 미진한 편이다. 교통량의 증가로 도시간선도로는 간선도로로서의 역할을 제대로 수행하지 못하고 있다. 본 논문에서는 교통특성변수를 사용한 군집분석을 이용하여 도시간선도로의 기능을 정립하였다. 서울시내 55개의 간선도로의 기능을 정립하기 위해 교통량, 주말계수, 속도 계수 등 교통특성을 사용하였다. 본 논문의 결과와 AADT를 사용한 방법의 결과를 비교하였는데 AADT를 사용한 방법은 전체 차선의 교통량에 의해 특성을 분류하였으나 본 논문에서 실제 교통량을 반영한 차선당 교통량을 주요 변수로 사용하여 결과를 도출하였다. 또한 서울시 간선도로 기능분류와 본 논문의 결과를 비교하여 교통특성이 반영되었음을 증명하였다. 결과적으로 본 논문에서 제시한 방법은 현재 간선도로 기능분류 방법보다 교통특성을 나타내는데 효과적이며 기능분류체계는 도로확장 및 계획 설계에 도움이 될 것으로 판단된다.

첨단안전장치 장착 버스의 사고사례 분석 (Analysis for Traffic Accident of the Bus with Advanced Driver Assistance System (ADAS))

  • 박종진;최영수;박정만
    • 자동차안전학회지
    • /
    • 제13권3호
    • /
    • pp.78-85
    • /
    • 2021
  • Recently a traffic accident of heavy duty vehicles under the mandatory installation of ADAS (Advanced Driver Assistance System) is often reported in the media. Heavy duty vehicle accidents are normally occurring a high number of passenger's injury. According to report of Insurance Institute for Highway Safety, FCW (Forward Collision Warning) and AEB (Automatic Emergency Braking) were associated with a statistically significant 12% reduction in the rate of police-reportable crashes per vehicle miles traveled, and a significant 41% reduction in the rear-end crash rate of large trucks. Also many countries around the world, including Korea, are studying the effects of ADAS installation on accident reduction. Traffic accident statistics of passenger vehicle for business purpose in TMACS (Traffic safety information Management Complex System in Korea) tends to remarkably reduce the number of deaths due to the accident (2017(211), 2018(170), 2019(139)), but the number of traffic accidents (2017(8,939), 2018(9,181), 2019(10,095)) increases. In this paper, it is introduced a traffic accident case that could lead to high injury traffic accidents by being equipped with AEB in a bus. AEB reduces accidents and damage in general but malfunction of AEB could occur severe accident. Therefore, proper education is required to use AEB system, simply instead of focusing on developing and installing AEB to prevent traffic accidents. Traffic accident of AEB equipped vehicle may arise a new dispute between a driver's fault and vehicle defect. It is highly recommended to regulate an advanced event data recorder system.

지형정보를 이용한 도로의 최적 유지관리 비용 산정 (Highway Maintenance Cost Optimization Using GSIS)

  • 강인준;이준석
    • 한국측량학회지
    • /
    • 제20권4호
    • /
    • pp.367-374
    • /
    • 2002
  • 주요 간선도로의 유지관리는 도로 발전 과정의 계획 단계에서 고려되어야 하는 중요한 문제이다. 많은 도로 유지 관리 시스템들이 좀더 효율적인 의사 결정을 통해 정밀하게 유지보수 비용과 도로포장 비용을 산정 할 수 있도록 개발되었지만 이러한 시스템은 유지관리 비용을 줄이는데 별다른 도움을 주지 못했다. 본 연구에서는 도로 계획 단계에서 도로 설계의 특성들을 최적화함으로써 도로의 설계 수명동안 발생하는 유지보수 관리비용을 감소시켰으며, 절성토면의 경사에 비중을 두고 유지보수 비용을 최소화 할 수 있는 설계변수들에 기초한 초기비용 및 유지보수 비용을 공식화하였다. 도로 유지보수비용은 측면경사와 도로 횡단폭 그리고 연 평균 일일 교통량으로 표현되었다. 적용된 모델지역은 충북 청주-상주간의 실제 지형 데이터베이스를 사용하였으며, 도로 선형 결정시 도로 유지보수 비용과 토질 특성의 민감한 사안들을 조사하기 위해 제시하였다. 결과는 도로 유지보수 비용과 토질 특성은 도로선형 최적화에 중요한 고려사항임을 알 수 있었다.

도로 기반시설 개선과 교통흐름 변화에 따른 소형 경유자동차의 대기오염물질 배출특성 (Air Pollutant Emission Characteristics of a Light Duty Diesel Vehicle Affected by Road Infrastructure Improvement and Traffic flow Changes)

  • 길지훈;이태우;이상은;정성운;윤보섭;김정수;최광호
    • 한국분무공학회지
    • /
    • 제21권4호
    • /
    • pp.214-222
    • /
    • 2016
  • Changes in road infrastructure affect driving patterns and pollutant emission characteristics. we analyzed the changes in driving patterns and pollutant emission characteristics of the driving route via measured driving patterns at year 2009 and 2016. Since 2009, there has been an increase in population and traffic demand, including residential areas and industrial facilities. Traffic conditions were improved such as the opening of the highway Inter-Change to Seoul and the construction of underground driveway. As a result, the average vehicle speed increased. More detail comparisons have made on the changes of the underground driveway section and the crossroad section, which are expected to have significant changes in the transportation infrastructure. The vehicle speed distribution of the underground driveway changed from low speed to high speed, and the increase of the time spent at the high speed and high load caused the increase of NOx emissions. The vehicle speed also increased at the crossroad section, and the consequence NOx and $CO_2$ emissions decreased. It is mainly because the decreased time spent at idle, which results from the proper traffic demand management at this area.

교차로 포장 소성변형 저감을 위한 해석적 연구 (An Analytical Study to Reduce Plastic Deformation in Intersection Pavements)

  • 최준성;이강훈;권수안;정진훈
    • 한국도로학회논문집
    • /
    • 제14권4호
    • /
    • pp.29-36
    • /
    • 2012
  • PURPOSES : Plastic deformation is frequently made in intersection asphalt pavement at its early age due to deceleration and stoppage of vehicles. This study has been performed to provide a mechanistic basis for reasonable selection of paving method to minimize the plastic deformation at intersection. METHODS : Pavement layer, temperature, traffic volume of the intersections managed by the Daejeon Regional Construction and Management Administration were collected to calculate asphalt dynamic modulus with pavement depth by using a prediction equation suggested by the Korean pavement design guide. Performance of ordinary dense-graded asphalt pavement, polymer modified asphalt pavement, and fiber reinforced asphalt pavement was analyzed by finite element method and the results were used in a performance model to predict the plastic deformation. RESULTS : In aspect of performance, the three paving methods were usable under low traffic while the fiber reinforced asphalt pavement was the most suitable under heavy traffic. CONCLUSIONS : Reasonable paving method suitable for traffic characteristics in the intersection might be decided by considering economic feasibility.

4지 신호교차로에서 효율적 자전거 교통류 처리방안 연구 (A Study on Efficient Management of Bicycle Traffic Flow at Four-Legged Intersections)

  • 목승준;김응철;허희범
    • 한국도로학회논문집
    • /
    • 제15권3호
    • /
    • pp.177-189
    • /
    • 2013
  • PURPOSES: This study aims to suggest a proper left-turn treatment method for the bicycle traffic flow at four-legged intersections. METHODS: Four types of crossing methods are proposed and analyzed : (1) indirect left turn, (2) direct left turn, (3) direct left turn on a Bike Box, and (4) direct left turn on bike left turn lane. The VISSIM simulation tests were conducted based on forty-eight operation scenarios prepared by varying vehicle and bicycle traffic volumes. RESULTS : The results from the four-legged signalized intersections suggest that (1) the indirect left turn is appropriate when vehicle demand is high, (2) the direct left turn is efficient on most traffic situation but the safety is a concern, (3) the direct left turn on a Bike Box is appropriate when bicycle demand is high while vehicle demand is not, and (4) the direct left turn on a bike left turn lane is appropriate when both vehicle and bicycle demand are low. CONCLUSIONS : The direct left turn of bicycle provides more efficiency than the indirect left turn at the four-legged intersections but to apply the methods and to study more, advanced evaluation methods, related law, and insurance programs are needed.