• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.4
• /
• pp.1-13
• /
• 2023

This study develops an optimal mobile-communication-based National Highway traffic volume estimation model using an ensemble-based machine learning algorithm. Based on information such as mobile communication data and VDS data, the LightGBM model was selected as the optimal model for estimating traffic volume. As a result of evaluating traffic volume estimation performance from 96 points where VDS was installed, MAPE was 8.49 (accuracy 91.51%). On the roads where VDS was not installed, traffic estimation accuracy was 92.6%.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.144-152
• /
• 2019

According to the National Police Agency, point-to-point speed enforcement system is being installed and operated in 97 sections across the country. It is more effective than other enforcement systems in terms of stabilizing the traffic flow and inhibiting the kangaroo effect. But it is only 5.1% of the total enforcement systems. The National Police Agency is also aware that its operation ratio is very low and it is necessary to expand point-to-point speed enforcement system. Hence, this study aims to provide the expansion basis of the point-to-point speed enforcement operation through analysis of the quantitative effects and development the accident prediction model. Firstly, this study analyzed the effectiveness of point-to-point speed enforcement system. Naive before-after study and comparison group method(C-G Method) were used as methodologies of analyzing the effectiveness. The result of using the naive before-after study was significant. Total accidents, EPDOs and casualty crashes decreased by 42.15%, 70.64% and 45.30% respectively. And average speed and the ratio of exceeding speed limit decreased by 6.92% and 20.50%p respectively. Moreover, using the C-G method total accidents, EPDOs and casualty crashes decreased by 31.35%, 66.62% and 10.04% respectively. And average speed and the ratio of exceeding speed limit decreased by 3.49% and 56.65%p respectively. Secondly, this study developed a prediction model for the probability of casualty crash. It was dependant on factors of traffic volume, ratio of exceeding speed limit, ratio of heavy vehicle, ratio of curve section, and presence of point-to-point speed enforcement. Finally, this study selected the most danger sections to the major highway and evaluated proper installation sections to the recent installation section by applying the accident prediction model. The results of this study are expected to be useful in establishing the installation standards for the point-to-point speed enforcement system.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.85-94
• /
• 2006

Currently, when the military performs military operations in wartime and peace time, it is important for him to obtain repeatedly updated traffic information for security of the military supply support. The purpose of this study is to present an acquisition way of the repeatedly updated traffic information which the military is available. To achieve this Purpose, firstly, this paper finded types of traffic information which the military demanded and limitations caused by an connection of traffic information network between the military and associated government agencies. Also. grasped ITS(Intelligent Transportation systems) equipment operation by associated government agencies (Ministry Construction & Transportation, Korea Highway Corporation, Seoul Metropolitan Government, National Police Agency, Korea Institute of Construction Technology) and connection situations of traffic information network among associated government agencies. On the basis of these materials, this study presented the most efficient connection method in the field of the space and the contents of traffic information between the military and associated government agencies and ITS connection system between the military and associated government agencies was contrived. Throughout the upper processes, this paper showed a method which is available for acquiring ITS traffic information of associated government agencies. In addition to the connection method of ITS traffic information network, resolutions for the problems caused by connection of ITS network were come up with. But the more deep study for this matter is needed since resolutions for the problems of the ITS network connection, which this paper presented, were very restricted.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.2
• /
• pp.75-91
• /
• 2015

This study aims to analyse the U-City characteristics through the U-City historical mapping. The U-City characteristics were analysed by building the U-City historical map in terms of STIM model which consists of service, technology, infrastructure and management. The data for analysis is the National Informatization White Paper published by the NIA (National Information Society Agency) from 2002 to 2013. As a result, first, the U-City service were evolved from administration informatization, enterprise informatization, administration/living informatization and administration/space/private informatization through the intelligence facilities and space. Second, the U-City technology were changed through wire network, sensor/network, processing/super-highway network, convergence of network/security. Third, the U-City infrastructure have had evolutionary process such as wire computer network, wire/wireless network, intellectualization facility and intelligent facility space. Forth, the U-City management were carried out with making the unit network/infrastructure management, information connection/operating management and information integration/participation management. Therefore, the history of U-City has been making rapid development in government computerization, computer oriented society, information city and ubiquitous city.

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.79-87
• /
• 2015

PURPOSES: According to accident statistics for road built in 2004, the ratio of accidents on frozen roads to normal roads is 0.9%, whereas the fatality ratio is 2.7%. The risk of accidents on frozen roads is very high. Measures taken every year to prevent traffic accidents of frozen roads in the winter season are still insufficient. Additionally, measures have been established mainly on rural roads. Therefore, for urban roads, analyses and measures to prevent accidents are lacking. In this study, data on accidents on frozen roads was used to search for the causes behind these accidents and measures to reduce accidents have been recommended. METHODS: In this study, collected data from the TAMS (Traffic Accident Management System), which were collected by the Seoul National Police Agency was used. The data were divided into vehicle, people, and condition of road. The analytical model used here was the Logistic Regression Model, which is frequently used for traffic safety and accident analysis. This study uses the odds ratio analysis to search for variables related to frozen road traffic accidents in each category. A total of 18 out of 47 variables were found to be the causes of accidents. RESULTS: From the results of the comparative analysis of 18 variables, the category of the condition of the road was found to be the most critical. Contrary to expectations, more accidents occurred in clear weather than in other conditions. Accidents on bridges occurred frequently, and its odds ratio was the highest compared with other road types. When BPT is operated, the probability of accidents on frozen roads is lower than in general conditions, and accidents occurred frequently on roads with less than four lanes. CONCLUSIONS : Based on the results of this study, suggestions for reducing the risk of future domestic road accidents in freezing conditions are indicated as follows. First, it is necessary to perform a technical review of the urban road traffic accidents caused by frozen roads. Second, it is necessary to establish criteria for the study of the road environment based on the major causes of road accidents on frozen roads. Third, improvements in urban road environmental factors should be made.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.119-127
• /
• 2011

The main purpose of this paper is to apply Zone 30 system which is being experimented in advanced country for the solution of controlling the residential street's speed to our country with the consideration of the real condition of our street and traffic and to run this system as an example to analyze the effect and at the same time, analyze the problem and get appropriate preparation for this system to be widespread. The area to run this model project is Goyang City Ilsan-Gu.($0.65km^2$) which is close with the commercial area reflecting the opinion of experts and an on-site verification by the National Police Agency T/F and is having a heavy pedestrian traffic and the risk of pedestrian accident. Firstly we defined residential street and residential street area to review the system and devided the residential street type to establish a plan of operation. Afterwards, we thoroughly examined the model project area and analyzed the problem and solution. We finally completed establishing a facilities by conference with a local autonomous entity with the improvement of facility's sketch at the analysis of the model project area. The result of effects analysis which we devided after and before of establishment is that vehicle speed be reduced 5~15km/h, and traffic accidents has decreased by 24 percent.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.177-185
• /
• 2011

In order to reduce traffic accidents at long road sections involving high risks of traffic accidents, including tunnels, bridges or curves, the National Police Agency have decided a tentative installation and operation of an automated point-to-point speed enforcement system based on cameras at January, 2007. The first system was established at the direction to Kangreung of Dunnae Tunnel at December, 2007. Currently, the automated point-to-point speed enforcement system operates at 11 sections including eight sections on expressways and three sections on national highways. However, there have been few researches on the effects of the system upon the reduction of traffic accidents in a scientific way. To this end, this research effort was initiated to evaluate the effect of the automated point-to-point speed enforcement system on traffic safety by comparing the number of traffic accidents before and after the installation of the system using a comparison-group(C-G) method. Three-year-long traffic accident data for the expressways were collected in order to evaluate the system. As a result, the installation of the system was found to reduce traffic accidents by 49.97% in average.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.167-175
• /
• 2011

Evaluation of fuel consumption for the various road condition and vehicle type is necessary to perform the economic analysis of road construction which is important for the efficient design and management of road. Economic analysis of road should consider the social cost which can be divided into agency cost including initial construction expense, maintenance cost, and so on, and user cost consisting of vehicle operating cost, congestion cost, etc. Since vehicle operating cost depends on the traffic volume, fuel consumption that is a major part of vehicle operating cost will change by traffic volume as well. Fuel consumption is significantly affected by vehicle speed and road condition, especially the roughness. Thus, fuel consumption should be evaluated in terms of road condition, which is not currently considered. In this study, the estimation model of fuel consumption for the passenger cars in Korea has been developed by considering the road condition. First, the relationship between vehicle speed and fuel consumption that is used to calculate the vehicle operating cost for investment evaluation of transportation facility and the initial feasibility study of road construction was investigated. Second, with the consideration of road roughness, fuel consumption of the passenger car was measured. From the measurement, it was found that fuel consumption increased by $80m{\ell}$ per 100km driving as the roughness increased by 1m/km. Therefore, it is recommended that for the economic analysis of road design and management, the fuel consumption should be a function of road roughness.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.61-71
• /
• 2003

Existent DDHV draws and is calculating K coefficient. D coefficient from sum of traffic volume two-directions time. There is difference of design order and actuality order, error of DDHV estimation value, problem of irregular change etc. of DDHV thereby. In this study, among traffic volume of each other independent two direction(going up, going down), decide design target order in the directional traffic volume, presented way(way) applying without separating K coefficient and D coefficient at the same time. The result were analysis about national highway permanent count point 360 points 30 orders by existing DDHV estimation value method(separation plan) analysis wave and following variation appear. - design order and actuality order are collision at 357 agencies(99.2%) - actuality order special quality : Measuring efficiency of average 80 orders, maximum 1,027 order, minimum 2 orders - error distribution of design order and actuality order : inside 10 hours is(30$\pm$10hour) 106 points(29.4%), 254 points(70.6%) more than 30 orders and $\pm$10 orders error occurrence be - DDHV estimation value : Average 8.4%, maximum 46.7% The other side, average 50 orders. error improvement effect of DDHV 8.4% was analysed that is at design hourly volume computation by inseparability method in case of AADT premises correct thing because inseparability plan agrees actuality order at whole agency with design order and measuring efficiency of DDHV estimation value is "0".t;0".uot;.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.105-115
• /
• 2009

According to the accident statistics published by the National Police Agency in 2007, the number of commercial vehicle(city, suburb and other buses) accidents consumes 3.5 percent of the total number of traffic accidents in this year. Since the commercial vehicles are responsible for not only the drivers but also the passengers, it leads more serious social and economic problems. There have been various forms of systems such as a digital speedometer or a black box to meet the social requirement for reducing traffic accidents and safe driving. however the system based on the data after accident control the driver by analyze dangerous drive behaviors, so there is a limit to control driver in real-time. Also speedometer currently managed provide the driver warning information in real-time, but using only the speed of vehicle and RPM information regardless of actual dangerous drive behaviors, disappear the effectiveness. In this study performed a simulation for drivers in general using a simulator programed with dangerous driving types we had developed in the previous study and judging the types. It'd be more effective system to provide the drivers warning information using weight valued in this study. However in this study is limited to apply weight as a result of simulation of drivers in general in actual situation should be made up the deficit based on information of driving type of actual commercial vehicles.