• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.13-14
• /
• 2016

This study is aimed to analyze temperature history at each section of mat foundation concrete applying double bubble sheets. The results of the study are as follows. Firstly, the results of measuring the temperature history indicate that the lowest external temperature has been recorded at -5.6℃ for the three-day measurement period. For the central section, the result indicates that the lower, center and upper part have all secured the concrete curing temperature of 18℃ or higher. This results are believed to have resulted from excellent heat insulation performance of double bubble sheets. For the edge section between the edge form and the concrete interface, the temperature has been measured, on average, approximately 12℃ lower than the central section. However, all measured sections have indicated the temperature of 5℃ or higher. Meanwhile, an analysis has been conducted through the estimation equation of compressive strength of maturity during the curing period in order to examine the possibility of early frost damage and the aspect of securing strength. It has been confirmed that the compressive strength is higher than 50°D·D, namely, 5MPa, on the 3rd day of the aging process, which allows early frost damage to be avoided.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.659-666
• /
• 2009

As the density and height of the buildings nearby subway lines get higher, the unprecedented residents' appeals for noise are on the rise. Furthermore, in accordance with the revision of enforcement regulations on the Noise and Vibration Control Act, the night time noise standards have been reinforced by 5dB effective on January 1st 2010 and the appropriate measures shall be taken accordingly. For the settlement of the public grievances against noise and vibration generated on tracks in at-grade and elevated section, the installation of continuously-welded-rail, rail lubrication system, improved fastening system and higher noise barrier is currently executed. Nevertheless, the noise and vibration levels in some areas are still exceeding the limits required in the regulation. Among the measures, an installation of higher noise barrier or noise tunnel seems to be the most effective way; however, it has limitations owing to the structural stability of existing elevated structures. The paper in consideration of the local conditions and foreign practices discusses the installation of fairing system under the train body as an noise insulation panel in order to reduce the rolling noise and under-carriage noise. Based on the result of this study, a performance verification test during actual train operation is in progress for further study.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.3
• /
• pp.352-357
• /
• 1996

Recently, Permanent Magnet Synchronous Motor(PMSM) drives are widely used for industrial applications due to its high efficiency and high power factor control strategy. PMSM generally have two classifications such as the SPMSM(Surface Permanent Magnet Synchronous Motors) and IPMSM(Inter Permanent Magnet Synchronous Motors). IPMSA has economical merits over SPMSM in higher speed range, mechanical robustness, and higher power rate by the geometric difference. The maximum torque operation in IPMSM is realized by the current angle control which is to utilize additional reluctance torque due to a rotor saliency. In traction, spindle and compressor drives, constant power operation with higher speed range are desirable. This is simply achieved in the DC motor drives by the reduction of the field current as the speed is increased. However, in the PMSM, direct control of the magnet flux is not available. The airgap flux can be weakened by the appropriate current angle control to demagnetize. In this paper, the control method of optimal current vector in IPMSM is described in order to obtain the maximum torque or maximum output with the speed and load variations. The applied algorithm is realized by the proto system with torque and speed control Experimental results show this approach is satisfied for the high performance servo applications. (author). 6 refs., 9 figs., 1 tab.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.4
• /
• pp.261-268
• /
• 2020

Objective: This study was conducted to provide basic data on physical function improvement activities of elderly care facilities by identifying the degree of physical improvement activities of elderly caregivers. Design: Descriptive correlational study. Methods: The instrument of this study consisted of 12 questions on the general characteristics of the subject. For the assessment of improvement in physical function activities, the measuring tool used for the elderly consisted of a total of 20 questions. For data analysis, Pearson's correlation coefficient & Spearman's rho and multiple regression were used. Results: The higher the age of the subjects, the lower their educational background (r=-0.273, p<0.05), and the higher the probability of having a religion (r=-0.258, p<0.05), the more stable the employment type (r=-0.333, p<0.05). The higher the level of education, the higher the monthly income (r=0.187, p<0.01), and the shorter the career (r=-0.204, p<0.05). The more stable employment, the more unstable duty (r=-0.245, p<0.05), and the more unstable work, the higher the monthly income (r=-0.206, p<0.05) and the longer the career, the higher the monthly income (r=0.247, p<0.05). The more stable the employment, the more activities to improve physical function were found (r=0.341, p<0.05), and the more unstable the duty, the more activities to improve physical function were found (r=0.321, p<0.05), and the higher monthly income, the less physical function improvement activities (r=-0.196, p<0.05). Conclusions: It is necessary to provide regular services by a dedicated physical therapist for physical function improvement activities in order to improve the quality of life of the elderly in the future.

• Journal of Science Education
• /
• v.38 no.1
• /
• pp.168-181
• /
• 2014

The purpose of this study was to monitor evaluation in science education at primary and secondary school in Korea. In order to do this, the survey was administered. The subject was 518 teachers; 292 elementary school teachers, 110 middle school science teachers and 116 general high school science teachers. It was found that the ratio of paper examination increased while that of performance evaluation decreased according to the grade of school. In the science paper examination, the ratio of selection type item was higher than that of supply type item, and the ratio of item belonging to knowledge area was higher than that of item belonging to the inquiry area regardless of the grade of school, teaching career, and teacher's gender. The teachers recognized the necessity of supply type item, but they suffered from the reliability of the result of that item. And it was hard for them to do performance evaluation because it took much time and effort. This study suggested that the high-quality in-service teacher training be provided and laboratory assistants who help the science experiment and grading test papers be employed in order to fulfil the performance evaluation and increase the ratio of supply type item and items belonging to the inquiry area.

• Geomechanics and Engineering
• /
• v.23 no.3
• /
• pp.227-244
• /
• 2020

Earthen structures have an excellent bioclimatic performance, but they are vulnerable against earthquakes. In order to investigate the edification process and costs, a full-scale rammed soil house was constructed in 2004. In 2016-2019, it was studied its seismic damage, durability and degradation process. During 2004-2016, the house presented a relatively good seismic performance (M_w=5.6-6.4). The damaged cover contributed in the fast deterioration of walls. In 2018 it was observed a partial collapse of one wall due to recent seismicity (M_w=5.6-6.1). The 15-year-old samples presented a reduced compressive strength (0.040 MPa) and a minimum moisture (1.38%). It is estimated that the existing house has approximately a remaining 20% of compressive strength with a degradation of about 5.4% (0.0109 MPa) per year (considering a time frame of 15 years) if compared to the new soil samples (0.2028 MPa, 3.52% of moisture). This correlation between moisture and compressive strength degradation was compared with the study of new soil samples at the same construction site and compared against the extracted samples from the 15-year-old house. At 7-14-days, the specimens presented a similar compressive strength as the degraded ones, but different moisture. Conversely, the 60-days specimens shown almost five times more strength as the existing samples for a similar moisture. It was observed in new rammed soil that the lower the water content, the higher the compressive/shear strength.

• Membrane and Water Treatment
• /
• v.7 no.4
• /
• pp.277-296
• /
• 2016

The aim of this research was to investigate the ability of nanofiltration (NF) and ultrafiltration (UF) membranes as a filtration unit for groundwater treatment for drinking water resources. Commercial membranes denoted as TS40, TFC-SR3 and GHSP were used to study the performance based on rejections and fluxes. The investigation has been conducted using natural groundwater obtained from a deep tube well with initial concentration of iron (Fe) and manganese (Mn) at 7.15 mg/L and 0.87 mg/L, respectively. Experimental results showed that NF membranes exhibited higher fluxes than UF membrane with pure water permeability at 4.68, 3.99 and $3.15L.m^{-2}.h^{-1}.bar^{-1}$, respectively. For metal rejection, these membranes have performed higher removal on Fe with TS40, TFC-SR3 and GHSP membranes having more than 82%, 92% and 86% respectively. Whereas, removal on Mn only achieved up to 60%, 80% and 30%, for TS40, TFC-SR3 and GHSP membranes respectively. In order to achieve drinking water standard, the membranes were efficient in removing Fe ion at 1 and 2 bar in contrast with Mn ion at 4 and 5 bar. Higher rejection of Fe and Mn were achieved when pH of feed solution was increased to more than 7 as TFC-SR3 membrane was negatively charged in basic solution. This effect could be attributed to the electrostatic effect interaction between membrane material and rejected ions. In conclusion, this study proved that NF membrane especially the TFC-SR3 membrane successfully treated local groundwater sources for public drinking water supply in line with the WHO standard.

• Composites Research
• /
• v.29 no.6
• /
• pp.328-335
• /
• 2016

The purpose of this study is to develop fiber reinforced cement matrix composite (ECC) produced with limestone powder in order to achieve high ductility of the composite, and to evaluate flexural performance of structural members made with ECC. Four kinds of mixture proportions were determined on the basis of the micromechanics and a steady state cracking theory considering the matrix fracture toughness and fiber-matrix interfacial characteristics. The mechanical properties of ECC, represented by strain-hardening behavior in uniaxial tension, were investigated. Also, strength property of the composite was experimentally evaluated. Two structural members made with ECC were produced and tested. Test results were compared with those of conventional concrete structural members. Increased limestone powder contents of ECC provides higher ductility of the composites while generally resulting in a lower strength property. ECC structural members exhibited higher flexural ductility, higher flexural load-carrying capacity and tighter crack width compared to conventional structural members.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.35-38
• /
• 2006

This study investigated fundamental properties of lightweight foamed concrete using cement kiln dust (CKD) and both fly ash(FA) and stability agent. Test results showed that concrete incorporating more amounts of admixture decreased slump flow and it caused increase of superplasiticizer in order to secure the fluidity performance. In addition concrete adding stability agent showed stable flow state, resisting segregation of materials and decreasing bleeding capacity. Sinking depth of concrete incorporating 20% of CKD and adding 0.002% of stability agent was indicated at 0mm. For the properties of hardened concrete. compressive strength of concrete incorporating CKD declined due to a lower appearance density, compared with other specimens. The difference of that was not very significant and the value of ail specimen was higher than KS range. Moreover strength of concrete incorporating CKD was even higher at curing temperature $5^{\circ}C$. Tensile strength ratio of concrete incorporating CKD was indicated between 0.50 to 0.59, which is higher value than control concrete. Heat conductivity of concrete incorporating FA was under the KS range while concrete incorporating 20% of CKD was satisfied in KS. Concrete adding stability agent improved insulation performance due to the lower heat conductivity. In conclusion, it is possible that concrete incorporating 20% of CKD and adding 0.002% of stability agent can secure high quality of lightweight foamed concrete.

• Nutrition Research and Practice
• /
• v.18 no.2
• /
• pp.269-281
• /
• 2024

BACKGROUND/OBJECTIVES: The objective of this study was to compare dietary habits and mental health among middle school students in urban and rural areas based on bedtime, and to provide evidence supporting appropriate bedtime for Korean middle school students in relation to their healthy dietary habits and mental well-being. SUBJECTS/METHODS: The study population consisted of 25,681 second-year middle school students who participated in the Korea Youth Risk Behavior Survey in 2020-2022. Participants were asked about their bedtime and wake-up time during the past 7 days and were classified into five categories. The study compared the general characteristics, academic factors, dietary habits, and mental health of urban and rural students based on their bedtime. RESULTS: Bedtime was found to be later in the following order: urban female students, rural female students, urban male students, and rural male students. As bedtime got later, the rates of smoking and alcohol consumption increased. Students who went to bed before 11 p.m. had lower academic performance, while rural male students who went to bed after 2 a.m. had lower academic performance. Later bedtime was associated with increased smartphone usage, skipping breakfast, consuming fast food, and drinking carbonated beverages. Later bedtime was also associated with higher perceived stress levels, particularly among students who went to bed after 2 a.m., higher rates of suicidal ideation, experiencing sadness and despair, as well as the prevalence of clinically significant anxiety disorders. CONCLUSION: These results suggest that middle school students who go to bed too late have higher rates of smoking and alcohol drinking, as well as unhealthy eating habits, stress, suicidal ideation, sadness, and anxiety. Therefore, it is necessary to provide educational and social institutional support to promote adequate sleep for the health of adolescents.